One that will fit in the hole and will not stick out past the back of the amp and get knocked off again
Don't tell me to search it on the internet as someone has to have the correct one out there even if I have to upgrade to the screwdriver slot type
Thanks
WC
I Need A Fuse Holder Assembly 1977 Peavey LTD Steel Amp
Moderator: Shoshanah Marohn
- W. C. Edgar
- Posts: 724
- Joined: 28 Feb 2005 1:01 am
- Location: Iowa City Iowa, Madison CT, Nashville, Austin, Phoenix, East Coast Soon!
- Contact:
I Need A Fuse Holder Assembly 1977 Peavey LTD Steel Amp
First owner of Steelseat.com
1980 Sho-Bud Pro II & 1977 Sho-Bud Pro l
Lawrence 610 Pickups
1979 Peavey LTD
1980 Peavey Nashville 400
Goodrich L-120
Toured with Tim McGraw, Alan Jackson & more
wcedgar.com
1980 Sho-Bud Pro II & 1977 Sho-Bud Pro l
Lawrence 610 Pickups
1979 Peavey LTD
1980 Peavey Nashville 400
Goodrich L-120
Toured with Tim McGraw, Alan Jackson & more
wcedgar.com
- Bill A. Moore
- Posts: 1310
- Joined: 2 Jul 2007 3:17 pm
- Location: Silver City, New Mexico, USA
You need to know the size you need.
https://www.tubesandmore.com/products/a ... 16c276a974
https://www.tubesandmore.com/products/a ... 16c276a974
- W. C. Edgar
- Posts: 724
- Joined: 28 Feb 2005 1:01 am
- Location: Iowa City Iowa, Madison CT, Nashville, Austin, Phoenix, East Coast Soon!
- Contact:
LOL Yep I know
It's a 3AG Type and 6 Amp fuse
Problem is, none of the manufacturers show the total legnth
Thanks
It's a 3AG Type and 6 Amp fuse
Problem is, none of the manufacturers show the total legnth
Thanks
First owner of Steelseat.com
1980 Sho-Bud Pro II & 1977 Sho-Bud Pro l
Lawrence 610 Pickups
1979 Peavey LTD
1980 Peavey Nashville 400
Goodrich L-120
Toured with Tim McGraw, Alan Jackson & more
wcedgar.com
1980 Sho-Bud Pro II & 1977 Sho-Bud Pro l
Lawrence 610 Pickups
1979 Peavey LTD
1980 Peavey Nashville 400
Goodrich L-120
Toured with Tim McGraw, Alan Jackson & more
wcedgar.com
- Bill A. Moore
- Posts: 1310
- Joined: 2 Jul 2007 3:17 pm
- Location: Silver City, New Mexico, USA
- W. C. Edgar
- Posts: 724
- Joined: 28 Feb 2005 1:01 am
- Location: Iowa City Iowa, Madison CT, Nashville, Austin, Phoenix, East Coast Soon!
- Contact:
Holder
https://www.tubesandmore.com/products/f ... r-3ag-type
-40°C to 85°C.
Body Length 1.0 in.
Cap Length 0.78 in.
Chassis Hole Diameter 0.5 in.
Compatible Fuses 3AG
Dielectric Strength ≥ 2,400 V
Electrical Rating 250 V, 20 A
Item Diameter 0.69 in.
-40°C to 85°C.
Body Length 1.0 in.
Cap Length 0.78 in.
Chassis Hole Diameter 0.5 in.
Compatible Fuses 3AG
Dielectric Strength ≥ 2,400 V
Electrical Rating 250 V, 20 A
Item Diameter 0.69 in.
- W. C. Edgar
- Posts: 724
- Joined: 28 Feb 2005 1:01 am
- Location: Iowa City Iowa, Madison CT, Nashville, Austin, Phoenix, East Coast Soon!
- Contact:
Thanks, everybody
I got one from Roger at Peavey
If you need one go to them
I upgraded to the screwdriver slot type and it only sticks out about 1/8" on the back and leaves plenty of room inside the chassis to solder the two wires.
peavey does it again.
I got one from Roger at Peavey
If you need one go to them
I upgraded to the screwdriver slot type and it only sticks out about 1/8" on the back and leaves plenty of room inside the chassis to solder the two wires.
peavey does it again.
First owner of Steelseat.com
1980 Sho-Bud Pro II & 1977 Sho-Bud Pro l
Lawrence 610 Pickups
1979 Peavey LTD
1980 Peavey Nashville 400
Goodrich L-120
Toured with Tim McGraw, Alan Jackson & more
wcedgar.com
1980 Sho-Bud Pro II & 1977 Sho-Bud Pro l
Lawrence 610 Pickups
1979 Peavey LTD
1980 Peavey Nashville 400
Goodrich L-120
Toured with Tim McGraw, Alan Jackson & more
wcedgar.com