Sesh 400 I have #64
Moderator: Shoshanah Marohn
- Larry Behm
- Posts: 4400
- Joined: 4 Aug 1998 11:00 pm
- Location: Mt Angel, Or 97362
Sesh 400 I have #64
You?
'70 D10 Black fatback Emmons PP, Hilton VP, BJS bars, Boss GE-7 for Dobro effect, Zoom MS50G, Flamma Reverb, Planet Wave cables, Quilter 202 Toneblock, Telonics 15” speaker.
Phone: 971-219-8533
Phone: 971-219-8533
-
- Posts: 1292
- Joined: 24 Sep 1998 12:01 am
- Location: silverdale, WA. USA
Sesh 400
#59 loving it
-
- Posts: 181
- Joined: 11 Jun 2004 12:01 am
- Location: Spijkenisse, The Netherlands
-
- Posts: 1973
- Joined: 24 Feb 2006 1:01 am
- Location: Old Glory,Texas, USA 79540
#38. I was disappointed at first. I had a hard time finding a good tone. It sounded thin & nasal. But then I ripped off the settings from a photo here on the forum. What I found was it took some pretty drastic knob positions. Once I found that, I did play a gig & was pleased with what I got. Zum Hybrid SD 10, Goodrich pot pedal , Wet Reverb, Straight Ahead power amp,1501 BW Neo magnet speaker, Huff cabinet. The only problem, is that there are many loose parts to this setup & it takes a while to rig up. Nothing weighs much but more trips to the car. I’ve got to get it better organized, a case of some kind. I would be interested to see ya’ll settings once you get dialed in.
-
- Posts: 93
- Joined: 7 Mar 2007 12:20 pm
- Location: Scottsburg, Indiana, USA
I don't have much to compare it to other than my previous rig, but I used it a full-band practice this week for the first time and everyone thought it sounded great. I run direct in nearly every playing situation I have, and it sounded good coming through the speakers. It cut through as it needed.Ron Hogan wrote:Have any of you actually used it on a gig? Using it in the practice room doesn’t give a good comparison.
- Jerry Overstreet
- Posts: 12622
- Joined: 11 Jul 2000 12:01 am
- Location: Louisville Ky
Watching....Ron Hogan wrote:Have any of you actually used it on a gig? Using it in the practice room doesn’t give a good comparison.
Last edited by Jerry Overstreet on 21 Jul 2023 1:34 pm, edited 1 time in total.
-
- Posts: 1042
- Joined: 4 Aug 1998 11:00 pm
- Location: Fairmount, IL USA
- Contact:
-
- Posts: 3879
- Joined: 4 Aug 1998 11:00 pm
- Location: Hendersonville Tn USA
-
- Posts: 315
- Joined: 9 Mar 2012 3:22 pm
- Location: Graham, Washington, USA
-
- Posts: 315
- Joined: 9 Mar 2012 3:22 pm
- Location: Graham, Washington, USA
- Carl Williams
- Posts: 3105
- Joined: 27 Sep 2004 12:01 am
- Location: Oklahoma
- Paddy Long
- Posts: 5462
- Joined: 19 Aug 2003 12:01 am
- Location: Christchurch, New Zealand
- Ken Pippus
- Posts: 2618
- Joined: 8 Feb 2007 7:55 am
- Location: Langford, BC, Canada
- Brad Sarno
- Posts: 4916
- Joined: 18 Dec 2000 1:01 am
- Location: St. Louis, MO USA
- Contact:
-
- Posts: 23
- Joined: 13 Jul 2012 10:11 pm
- Location: France
#3 !!
Last edited by John Macy on 25 Aug 2023 4:26 am, edited 1 time in total.
John Macy
Rockport, TX
Engineer/Producer/Steel Guitar
Rockport, TX
Engineer/Producer/Steel Guitar
- William Carter
- Posts: 96
- Joined: 3 Aug 2020 2:09 pm
- Location: Cedar Rapids, Iowa, USA