ZB Pedal Steel Guitars - Please help!

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

steinar
Posts: 293
Joined: 28 Aug 1998 12:01 am
Location: Finneidfjord, Norway

Post by steinar »

Hi Kevin.

You wrote me a while back saying you had refinished my 1968 ZB for Greg. Your post about the light weight case really got me thinking, because I understand the case isn´t all that good and I already have an unoperated hernia, so how much approximately would such a case with wheels be?
If you want to, you can e-mail me at macsteinar@c2i.net.

Yours truly,

Steinar
smike
Posts: 166
Joined: 11 Mar 2000 1:01 am
Location: oakland, ca
Contact:

Post by smike »

gang -

i promised when this thread was only a page or two long that i would post photos of the zb universal that tom bradshaw re-built for me... serial #001!

while the body, end plates, tuning peg holders and other misc. pieces are original, the entire undercarriage has been custom re-built, including a ball-bearing nut roller, new changer, custom designed and built bell cranks, a stiffening rod (virtually no de-tuning!), tunable half-stop on the second string, etc.

photos are here:

http://www.5happy.com/misc/zb_universal

bruce

p.s.: someone in this thread mentioned ned selfe, in s.f.... i met him a million years ago and haven't seen him since... but i did recently acquire an album of his called 'glaciers come, glaciers go'... nice stuff.<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by smike on 26 November 2004 at 04:16 PM.]</p></FONT>
User avatar
Chuck McGill
Posts: 1890
Joined: 30 Apr 2002 12:01 am
Location: An hour from Memphis and 2 from Nashville, R.I.P.

Post by Chuck McGill »

That is only other U12 ZB I've seen. Mine is
still in the rebuild stage. She looks great.
I need a fingerboard like yours. Any Ideas?
User avatar
Chuck McGill
Posts: 1890
Joined: 30 Apr 2002 12:01 am
Location: An hour from Memphis and 2 from Nashville, R.I.P.

Post by Chuck McGill »

How does this changer effect the sound of your Uni? She really looks great and do you
know where to get the white 12str finger board?
smike
Posts: 166
Joined: 11 Mar 2000 1:01 am
Location: oakland, ca
Contact:

Post by smike »

the fingerboard came with the body.

the changer and ball bearing nut roller are smooth as silk... the guitar plays and stays in tune like you wouldn't believe.

i have to press down with the bar ever-so-slightly more deliberately at the first fret, to stay clean, but it's a wonderful guitar.

bradshaw really knows the instrument, and is a fine craftsman.

bruce<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by smike on 24 January 2005 at 04:16 PM.]</p></FONT>
User avatar
Larry Chung
Posts: 962
Joined: 8 Aug 2001 12:01 am
Location: San Francisco, CA, USA
Contact:

Post by Larry Chung »

Hey smike!

Great looking ZB - I'm here at the airport in Inchon South Korea and I just had to post on this thread.

I just check my email and there's another mysterious D-11-10 that someone wrote me about - serial number 0008. More details soon.

All ZBest from around the world!
Larry

------------------
Larry Chung
'67 ZB D-10 8+4 (ser. #1077)
'69 ZB S-10 3+4 (ser. #0124)
'70 ZB D-10 8+4 (ser.# 0215)
'71 ZB Custom S-11 4+4 (ser. #0252)


Ron !
Posts: 3860
Joined: 11 Aug 2004 12:01 am

Post by Ron ! »

Hi Guys.

Anybody seen this? http://home.comcast.net/~cdmarcone/zb.htm
Just stumbled on it on the internet.Dunno if this is listed in this topic.
I do not want to go tru all of the post looking for it.Ha

Take a look.

Ron

Nikaro SD10 4x6
Image <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Ronald ! on 07 December 2004 at 12:31 AM.]</p></FONT>
User avatar
Larry Chung
Posts: 962
Joined: 8 Aug 2001 12:01 am
Location: San Francisco, CA, USA
Contact:

Post by Larry Chung »

Yes, indeed - that's Zane Beck's daughter's website and she was gracious enough to pass that along earlier in the post. A great resource for dating the early (Zane-owned) ZBs!

All ZBest,
Larry

------------------
Larry Chung
'67 ZB D-10 8+4 (ser. #1077)
'69 ZB S-10 3+4 (ser. #0124)
'70 ZB D-10 8+4 (ser.# 0215)
'71 ZB Custom S-11 4+4 (ser. #0252)


Kevin Hatton
Posts: 8173
Joined: 3 Jan 2002 1:01 am
Location: Buffalo, N.Y.
Contact:

Post by Kevin Hatton »

I just got #1107.
Billy Murdoch
Posts: 2161
Joined: 14 Feb 2004 1:01 am
Location: Glasgow, Scotland, U.K.

Post by Billy Murdoch »

Hi All,
Info needed.
I notice on a number of previous posts the mention of 0506,Am I right in guessing that this is a model number qand not a serial number

Best regards
Billy
Kevin Hatton
Posts: 8173
Joined: 3 Jan 2002 1:01 am
Location: Buffalo, N.Y.
Contact:

Post by Kevin Hatton »

By the way, #1107 will be for sale after full restoration. Its being done in Carnegie Hall black. Triple raise and lower capabilities on that 68 changer. It will be in new condition.<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Kevin Hatton on 07 December 2004 at 04:43 PM.]</p></FONT><FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Kevin Hatton on 01 January 2005 at 10:38 AM.]</p></FONT>
User avatar
Larry Chung
Posts: 962
Joined: 8 Aug 2001 12:01 am
Location: San Francisco, CA, USA
Contact:

Post by Larry Chung »

Have finished my restoration of ZB #0215, now it's 8+4 and sounds and plays wonderfully! As a ZB should!

If I play my cards right with Santa, a digital camera and ZB pictures for all is in the works... unless I get a lump of coal.

Happy Holidays and all ZBest,
Larry

------------------
Larry Chung
'67 ZB D-10 8+4 (ser. #1077)
'69 ZB S-10 3+4 (ser. #0124)
'70 ZB D-10 8+4 (ser.# 0215)
'71 ZB Custom S-11 4+4 (ser. #0252)


User avatar
Brendan Mitchell
Posts: 1506
Joined: 26 Nov 2000 1:01 am
Location: Melbourne Australia

Post by Brendan Mitchell »

I need some help : I have just started putting my D10 back together and am having trouble getting a lighter pull on my B pedal [G#>A] Also when A&B are engaged and I release A it will return sharp until I release B so I figure the A rods are binding somewhere.Is there any place I should be lubricating and if so what should I use ?
User avatar
Duncan Hodge
Posts: 1670
Joined: 26 Dec 2003 1:01 am
Location: DeLand, FL USA

Post by Duncan Hodge »

Hey Folks,
It looks like I'm back in the club. Greg Jones is finishing up a blue/blonde D-10 for me as I write. I apologize for being crazy enough to sell my old ZB, but am sort of glad that Andrew Buhler in Virginia is so much in love with my old one that he wouldn't sell it back to me. I begged, threatened, but stopped short of crying like a girl to get it back
I hope that I'm still welcome even though I'm still going to play my Speedy West Marlen too, on account of it sounds really great.
Duncan
Kevin Hatton
Posts: 8173
Joined: 3 Jan 2002 1:01 am
Location: Buffalo, N.Y.
Contact:

Post by Kevin Hatton »

Duncan, wait until you see your new one. Your gonna freak. I've seen it close up. Its incredibly beautiful, in brand new condition. You are a lucky guy.
Rich Weiss
Posts: 444
Joined: 18 Jun 2001 12:01 am
Location: Woodland Hills, CA, USA

Post by Rich Weiss »

12 pages, 464 posts, okay I'll bite.

I had, for many years, a single neck ZB, brown birds-eye maple, white pickup, serial 0014. It was sweet.

One day it broke, and not knowing what to do, I called Jeff Newman. He suggested I buy a new guitar. He liked Thomas pedal steels, out of Modesto. Barry Thomas gave me $200 for the ZB, and it ended up going to Larry Petree, in Bakersfield. I sure wish I had it back. Did I mention it had a white pickup? Image

Kevin Hatton
Posts: 8173
Joined: 3 Jan 2002 1:01 am
Location: Buffalo, N.Y.
Contact:

Post by Kevin Hatton »

Lubrication and ZB's. Okay folks we are in the middle of winter. I keep my ZB set up in my practice studio downstairs. I have forced air heat and I notice that my ZB will literally dry out if I don't keep it lubricated. I notice that ZB's respond extremely well to lubrication. Here are some of my observations. My ZB lets me know when it needs to be oiled or greased. The return springs on the cross straps will dry out and I sometimes get a "boingy" kind of noise from them. I notice that if I put a very light coating of vasoline on them that it quiets them down. I get some creeks in the winter from a number places. My front rail was creeking every time I pushed A&B pedal down just recently. I loosened the front rail screws and drop a drop of Marvel Machine tool oil behind the rail then re-tightened the rail. Problem solved. I got a creek from the ball joints that attach the pedal rods to the pedal. I just drop a drop of Marvel Machine tool oil into each ball joint every six months and it makes the pedals play just a wee bit smoother. I also put a drop of oil on the elbow bend in the rod where it hooks into the pedal rail. One drop of Marvel Machine Tool Oil between each changer cap every three months. And now the most and absolutely mandatory ZB lube point. When I change strings every third time which is about every two months I pull the nut rollers off the nut roller axle and polish the nut axle with very light emory cloth then coat it with Marvel Machine Tool oil. If I don't do this and my guitar drys out the classic fourth string will start to hang up and not return to "0". As long as I keep it lubed I never have a problem. I notice that the lube issues come up mostly in the winter,
Local players are amazed at the smoothness
that my ZB plays. I was just sitting here playing it and really digging it. My one friend a few towns away bought a ZB D-10 immediately after trying mine out and hearing it at a club a couple of years ago. Like me he had heard the ZB horror stories and was pleasantly surprised when he played mine. I keep mine metal polished and aside from the cool vintage fade it looks brand new. My guitar gets moved and played between three cities constantly in all kinds of weather. There is no cabinet drop on the E's unless the end plate screws are not tightened down. They are dead on whether the A&B pedals are pushed or not. Every pull on the guitar returns dead on true on the tuning meter and the guitar is a joy to play, and the sound as we all know is awesome. I don't think I'll ever play another brand of guitar again. I equate playing a well adjusted ZB to driving a classic Jaguar. When they are tuned and adjusted properly there is nothing better, but when they are out of adjustment and not maintained they can be frustrating. Mine is rock stable. I find the sum total of lubricating the guitar makes a 1000 percent difference in the overall smoothness of the guitar.
These are just some tips and observations for y'all after being a ZB convert for the last two years. I have two more coming in. Both in new condition. Hope this has helped. Enjoy.
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Kevin Hatton on 14 January 2005 at 11:56 PM.]</p></FONT><FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Kevin Hatton on 14 January 2005 at 11:58 PM.]</p></FONT>
User avatar
Dave Zirbel
Posts: 4170
Joined: 4 Aug 1998 11:00 pm
Location: Sebastopol, CA USA

Post by Dave Zirbel »

Thanks for tips Kevin. Mine is a little overdue for a lube and cleaning. The E's aren't returning but the first three months I had it, it was rock solid. I pulled it out of the case at a recording session and didn't even have to adjust any tuning! And that was after playing a few sets the night before with the guitar spending the night in the truck! I don't take it out much since it weighs close to 75 lbs. I've been playing a Kline which has a similar mechanism to the ZBs. it's about 20 pounds lighter, sounds great and stays in tune like crazy, too. Although, I think I'm going to lube and clean the ZB and take her out in February for a two nighter with Merle Haggard! That's worth lugging around the extra weight, plus she was built in Bakersfield! Maybe it will help me channel that Bakersfield sound. Image

------------------
Dave Zirbel-
ZB Custom D-10 8 x 5, S-12U Kline 7 x6, Dobro Cyclops reissue, 1967 Fender Telecaster, Webb 6-14E, Fender Super Reverb
The Mother Truckers
The Cowlicks





<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Dave Zirbel on 15 January 2005 at 09:41 AM.]</p></FONT>
User avatar
Dave Zirbel
Posts: 4170
Joined: 4 Aug 1998 11:00 pm
Location: Sebastopol, CA USA

Post by Dave Zirbel »

By the way, if anyone has a lead on a ZB 12 or 11 string for sale, I'm in the market.

Thanks, Dave

------------------
Dave Zirbel-
ZB Custom D-10 8 x 5, S-12U Kline 7 x6, Dobro Cyclops reissue, 1967 Fender Telecaster, Webb 6-14E, Fender Super Reverb
The Mother Truckers
The Cowlicks





<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Dave Zirbel on 15 January 2005 at 10:17 AM.]</p></FONT>
User avatar
Brendan Mitchell
Posts: 1506
Joined: 26 Nov 2000 1:01 am
Location: Melbourne Australia

Post by Brendan Mitchell »

Hey Dave be sure to let us know how the gig goes with Merle.A set list would be good too.Thanks Kevin for the lube tips.
Brendan
User avatar
Webb Kline
Posts: 903
Joined: 27 Dec 2004 1:01 am
Location: Bloomsburg, PA

Post by Webb Kline »

Can one of you ZBers tell me if the fretboard is to be butted up against the headstock or is does is just go to the end of the nut? I took them off my 11/10 to refinish the necks and, like the idiot that I am, I didn't think to measure it.

I didn't want to restring it to find out for fear of smearing the glue.

------------------
MCI D10 8+5, ZB 11/10 8+3 Early 30s Dobro, Harmony Lap Steel, ad infinitum

B. Greg Jones
Posts: 810
Joined: 16 Aug 2000 12:01 am
Location: Middleport, Ohio USA

Post by B. Greg Jones »

Webb, ZB's have a 24" scale. Set the 12th fret of each fretboard 12" from the center of the changer axle. Then adjust the nut roller so it's axle is 24" from the 12th fret. I have seen some butt up against the keyhead and some that left a gap.

Greg
User avatar
Webb Kline
Posts: 903
Joined: 27 Dec 2004 1:01 am
Location: Bloomsburg, PA

Post by Webb Kline »

Thanks Greg. I should have it back together in a day or two. I'll send pics then and maybe you can get an idea what I'm going to need underneath.

Webb<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Webb Kline on 16 January 2005 at 05:44 AM.]</p></FONT>
User avatar
Dave Van Allen
Posts: 6157
Joined: 4 Aug 1998 11:00 pm
Location: Doylestown, PA , US , Earth
Contact:

Post by Dave Van Allen »

Thanks for the lube tips KH... mine is overdue for an oil bath.
But she sure sounds great! She was my date for New Years Eve Image


(link above is to .8mb mp3)

------------------

"I've got the 'ZB Jeebies™' !"
Image
"Pickin' it 'old school' on the Pedizzle Stizzle"
<small>1998 Zumsteel U12 "Loafer" 8&6 :: 1973 ZB Custom D-10 8&5 :: Vintage Fender 'Tube' Amplification

www.dvanet.net :: zbcustom73@dvanet.net :: www.lasttrainhome.com
:: My Tribute to the Hot Club of America in Hi-Fi


Pat Kelly
Posts: 469
Joined: 29 Feb 2004 1:01 am
Location: Wentworthville, New South Wales, Australia

Post by Pat Kelly »

Re: D 11. Has anyone used the 11 for another note than E? Is anyone using changes on this?
Post Reply