Patches for Boss Katana

Charlie Hansen · Post by **Charlie Hansen** » 7 Nov 2022 7:05 pm

Are there any pedal steel patches for pedal steel. Most of what I can find are distorted and overdriven patches.

Ron Hogan · Post by **Ron Hogan** » 8 Nov 2022 5:41 am

Charlie,
Here’s a teaching I did for the steel guitars of Nashville on that amp. Maybe it will help.

https://fb.watch/gG5qdEHfWE/

Larry Dering · Post by **Larry Dering** » 8 Nov 2022 5:56 am

Charlie, I used Ron's video and got some decent tones. For me the bass set less than full. What improved my experience was the Katana app on my tablet. There I can alter the mid frequency and the effects then save it to my library. Boss has a tone studio for your computer that works well but a bit tricky to load the 1st time and set up the actual amp to receive it. I'm happier with the app. I know there is a way to upload my settings to the tone studio but I haven't explored that yet. If so, you will still need your computer or tablet or smartphone to get the patches installed.

Charlie Hansen · Post by **Charlie Hansen** » 8 Nov 2022 11:38 am

Larry Dering wrote:Charlie, I used Ron's video and got some decent tones. For me the bass set less than full. What improved my experience was the Katana app on my tablet. There I can alter the mid frequency and the effects then save it to my library. Boss has a tone studio for your computer that works well but a bit tricky to load the 1st time and set up the actual amp to receive it. I'm happier with the app. I know there is a way to upload my settings to the tone studio but I haven't explored that yet. If so, you will still need your computer or tablet or smartphone to get the patches installed.

I have the Tone Studio and the Librarian but I'd like to see if there are patches proprietary to the pedal steel. I've downloaded a few that I thought might work but they take a lot of tweaking to get anywhere close. Thanks for the replies guys. I appreciate it.

Larry Dering · Post by **Larry Dering** » 8 Nov 2022 11:43 am

Unfortunately that seems to be the case for every patch I've found. I still used a Line 6 pod for effects and what few steel patches I found were not good.

Tony Prior · Post by **Tony Prior** » 10 Nov 2022 1:15 am

My two cents- LOL as usual.

I picked up a used Katana 50 a bit over a year ago. I like it just fine as a small amp in the right "venue"

I spent gobs of time with patches , downloading, adjusting, tweaking etc...Then I wrote 3 or 4 patches that were close- "almost acceptable" , I even acquired the foot switch. My thought process was that I don't need to carry a small pedal board anymore. An interesting thought. I was replacing a small pedal board ( with foot switches) with an amp Foot Switch. LOL .

SO , after some time, which I can't get back, I reverted BACK to my small pedal board and only use the K-50 in the Clean Mode. Sometimes I use the K 50 amp reverb, sometimes not, to me its acceptable.

The small pedal board I mostly use is the Boss BCB 30 , it holds 3 BOSS pedals. But if you cut out the "inner plastic" with a Dremel tool it can easily handle 4 or 5 pedals, depending on the physical pedal size. I have 4 in mine, two are double sized. Nux Atlantic Delay/Reverb, Wampler Dual Paisley Pedal, half sized Tremelo and a half sized BIG SCREEN Tuner. I can replace any one of them with another in seconds if need be. Point here, there is nothing inside the K50 or on any download that can equal what I have in the small pedal board. FOR ME.

I think the K 50 or K 100 are nice , reliable , low budget amps that perform well in the right venue. They have pretty good clean volume in the clean mode , but for me thats where it ends.

When I stopped trying to make it more than a nice low budget , light weight clean amp, which is what I wanted, thats when it became a quality tool.

Dave Falk · Post by **Dave Falk** » 10 Nov 2022 5:46 am

I also have the Katana 50, and struggle to find a clean sound......a bit too much distortion for my liking. However I have never tried the updates......just using the stock settings........the Clean setting is not clean enough to my tin ears.

Ron Hogan · Post by **Ron Hogan** » 10 Nov 2022 11:41 am

Charlie,
Here’s a teaching I did for the steel guitars of Nashville on that amp. Maybe it will help.

https://fb.watch/gG5qdEHfWE/

Charlie Hansen · Post by **Charlie Hansen** » 10 Nov 2022 2:24 pm

Thanks guys I’ll try all this stuff.

Dave Falk · Post by **Dave Falk** » 10 Nov 2022 8:04 pm

DOAK!.....as soon as I moved from clean to acoustic, I started to get cool clean tone.........thank you kindly.

Dave Falk wrote:I also have the Katana 50, and struggle to find a clean sound......a bit too much distortion for my liking. However I have never tried the updates......just using the stock settings........the Clean setting is not clean enough to my tin ears.

Larry Dering · Post by **Larry Dering** » 12 Nov 2022 6:13 am

Dave, I also use the acoustic setting to build my patch. Again the best improvement came with using the Katana app and tweaking the mids and the effects.

Charlie Hansen · Post by **Charlie Hansen** » 12 Nov 2022 6:21 am

I've downloaded a few patches and the best that I've found so far is the Deluxe Reverb in Fender Sneaky amps. It's dry so you can add reverb/delay and just tweak the tone a bit and it's adequate.

Tony Dingus · Post by **Tony Dingus** » 12 Nov 2022 8:22 am

Charlie is that amp patch on the Boss website ?

Tony

Charlie Hansen · Post by **Charlie Hansen** » 14 Nov 2022 4:01 pm

Tony Dingus wrote:Charlie is that amp patch on the Boss website ?

Tony

No, if you go to the facebook site”boss katana patch central” , in the file section it’s under Fender Sneaky amps.

Tony Dingus · Post by **Tony Dingus** » 14 Nov 2022 7:51 pm

Thanks Charlie.

Tony

The Steel Guitar Forum

Patches for Boss Katana

Patches for Boss Katana

Boss Katana 50 tone

Re: Boss Katana 50 tone