Pedalboard Stand

C. Eric Banister · Post by **C. Eric Banister** » 21 Sep 2022 11:57 am

For those that have a pedal board they operate with their hands, what do you sit it on so you don't have to lean over to hit a pedal/button?

Jon Light · Post by **Jon Light** » 21 Sep 2022 12:38 pm

Pedal Train board sitting on its hard case.

Howard Parker · Post by **Howard Parker** » 21 Sep 2022 12:47 pm

Jon,

You are my hero!

hp

Jon Light · Post by **Jon Light** » 21 Sep 2022 12:51 pm

Howard Parker wrote:Jon,

You are my hero! :D

hp

Doing it so nobody else has to !

Dennis Detweiler · Post by **Dennis Detweiler** » 21 Sep 2022 1:12 pm

When the band starts all of the lights dim and the club owner can't figure out why the cash register drawer won't open.

Howard Parker · Post by **Howard Parker** » 21 Sep 2022 5:49 pm

During the first power chord the AC goes out and the Emergency Exit lights come on....

Not As impressive but I also stick my pedal board on top of a road case. Not elegant but works fine.

h

Roy Carroll · Post by **Roy Carroll** » 22 Sep 2022 7:03 am

Jon, I believe you could squeeze one or two more pedals in there if you tried.

Post by **Dave Mudgett** » 22 Sep 2022 7:47 am

Pedal steel case. I can reach while sitting, but still hit buttons with my feet while standing with guitar.

Richard Sinkler · Post by **Richard Sinkler** » 22 Sep 2022 9:46 am

If I am using my pedal board with my NV112, I use this setup, which sits to my right, everything within easy reach. The small speaker stand is mounted to a bracket on the bottom of the pedalboard. The bracket mounts with 4 male threaded knobs that screw into metal threaded inserts like those used in furniture you assemble yourself. If I used my NV400, which the chassis is built into a head that sits on the floor to my right, and the pedalboard sits on top. Everything is prewired with a chord to go into the guitar, a cord to go to the volume pedal, cord that run from the Zoom multi-effects pedal to the front effects loop of my NV400 (the reverb died in the amp - I use the amp reverb in the NV112). I mounted LED light strips on the bottom so I can see the knobs on my NV400, and if using the stand, it shines enough for me to better see my fretboard in the dark. I use my phone for set lists, so I mounted a phone holder on the pedalboard.

Marty Broussard · Post by **Marty Broussard** » 22 Sep 2022 11:29 am

Brett Lanier · Post by **Brett Lanier** » 22 Sep 2022 4:40 pm

A snare stand works well with a pedaltrain jr. Fits in the leg case, or you can backline them. Also very handy for when you need to get on and off stage quickly - tighten it up and you can just lift from the center of the pedalboard.

Dave Hopping · Post by **Dave Hopping** » 22 Sep 2022 5:34 pm

I use a rack instead of a pedalboard, but the folding keyboard bench my rack sits on would work just as well for a pedalboard--without having to put that little case under the rack.

D Schubert · Post by **D Schubert** » 22 Sep 2022 7:47 pm

On top of two milk crates, where I can hit the switches with my right hand. Room for the amplifier head as well.

Mike Bacciarini · Post by **Mike Bacciarini** » 23 Sep 2022 8:01 am

I built my pedal board into a rack case with wheels on the bottom, power supplies inside. Works great!

Dennis Detweiler · Post by **Dennis Detweiler** » 23 Sep 2022 8:29 am

I only use 5 pedals, including tuner. I have mine set up like Mike's, except I have my Quilter Tone Block mounted with them. Quick setup.

Ken Metcalf · Post by **Ken Metcalf** » 27 Sep 2022 4:30 am

Pedal Train.

Donn Lewis · Post by **Donn Lewis** » 27 Sep 2022 5:08 am

This:

https://www.amazon.com/gp/product/B01MS ... UTF8&psc=1

C. D. Maclean · Post by **C. D. Maclean** » 28 Sep 2022 10:37 am

Think I’ve outgrown this now. New pedal board is a converted bass guitar case.
Cheers

Ian Worley · Post by **Ian Worley** » 28 Sep 2022 10:43 am

C. D. Maclean wrote:Think I’ve outgrown this now...

Looks like the cockpit of a 747

C. D. Maclean · Post by **C. D. Maclean** » 1 Oct 2022 7:56 am

That looks like my kind of setup Ian, but with significantly greater risks if you press the wrong button!

In case anyone is interested in what kind of noise all my stuff makes…..

https://calummaclean.bandcamp.com/releases

Larry Hamilton · Post by **Larry Hamilton** » 3 Oct 2022 8:04 am

I’m broke.

Dennis Detweiler · Post by **Dennis Detweiler** » 3 Oct 2022 8:34 pm

Those make good amp covers too.

Glenn Taylor · Post by **Glenn Taylor** » 19 Oct 2022 2:58 pm

I don't use a stand per se, I clamp stuff to the back legs of the instrument.

Tim Harr · Post by **Tim Harr** » 19 Oct 2022 8:19 pm

I just simply put the rack on the top of my amp. Pretty simple.

Marty Broussard · Post by **Marty Broussard** » 20 Oct 2022 5:20 pm

The Steel Guitar Forum

Pedalboard Stand

Pedalboard Stand

Pedalboard stand