Dogbone.

[colin mcintosh]

Working on my guitar I lost a dogbone.
So as a repair I've expanded on a repair seen previously to replace it and it is a very simple solution.
I used a pop rivet and with a Dremel and cutting disc.







Grind the rivet on either side so that it remains whole. Simple fix and easy to do whether it be temporary or permanent.

[Ron Hogan]

If you find the right rivet, you don’t need to make the notch in the middle and it’ll slide right in the hole of the pull finger/bell crank.

https://www.facebook.com/groups/1826662 ... tid=6pSAYW

[colin mcintosh]

True but by notching the rivet you can use the original rod and have a more snug fit with rivet. But to each his own.