Zirctone - New Production Zirconia Tonebars For Sale
-
- Posts: 591
- Joined: 13 Dec 1999 1:01 am
- Location: leawood, ks., usa
Conical bar
I’d like one-10 string conical if you ever get to it. Another steeler tells me that the conical bars are more accurate for keeping the bottom strings in tune with the octave strings above. As one plays the eye lines up the edge with the fret and the lower strings have more length to vibrate and thus stay in tune as you go up the neck.
Last edited by tom anderson on 9 Feb 2022 1:00 pm, edited 1 time in total.
- Lynn Stafford
- Posts: 2233
- Joined: 17 Sep 2002 12:01 am
- Location: Ridgefield, WA USA
- Contact:
Zirctone - New Production Zirconia Tonebars For Sale
Mark,
Please put me on your list for a 15/16" Dia. X 12 string bar.
Please put me on your list for a 15/16" Dia. X 12 string bar.
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
----------------------------------
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
----------------------------------
- M Horton Smith
- Posts: 19
- Joined: 4 Nov 2020 10:47 am
- Location: Utah, USA
Erv and Lynn - I have you both on the list for the sizes you want, thank you friends!
David - thrilled you are loving your bar! The Jerry Byrd size will just be cylindrical for this first run in that size.
David and Tom - I'm happy to look at the slight conical shapes moving forward. Very interesting concept. Does anyone know what the taper angle would be by chance, I've never played one?
Best,
Mark
David - thrilled you are loving your bar! The Jerry Byrd size will just be cylindrical for this first run in that size.
David and Tom - I'm happy to look at the slight conical shapes moving forward. Very interesting concept. Does anyone know what the taper angle would be by chance, I've never played one?
Best,
Mark
-
- Posts: 1145
- Joined: 5 Feb 2010 6:53 pm
- Location: Hardin Montana, USA
bars
Good evening Sir:
I just sent you an email regarding getting in line for two bars.
Richard
I just sent you an email regarding getting in line for two bars.
Richard
- David Ball
- Posts: 1229
- Joined: 18 Feb 2010 1:37 pm
- Location: North Carolina High Country
Here's a llink to the BJS site showing the difference in the two noses (conical vs spherical on the Byrd bars): http://www.bjsbars.com/uploads/5/3/9/2/ ... w2560.jpeg
- M Horton Smith
- Posts: 19
- Joined: 4 Nov 2020 10:47 am
- Location: Utah, USA
-
- Posts: 1145
- Joined: 5 Feb 2010 6:53 pm
- Location: Hardin Montana, USA
zirctone
Hi Mark:
I wanted to bump this topic up to the top by asking if you have any new news or updates for us.
I am patient and can wait, just hoping you may be having some success getting necessary supplies to build these beauties for us.
Dick
I wanted to bump this topic up to the top by asking if you have any new news or updates for us.
I am patient and can wait, just hoping you may be having some success getting necessary supplies to build these beauties for us.
Dick
-
- Posts: 591
- Joined: 13 Dec 1999 1:01 am
- Location: leawood, ks., usa
- M Horton Smith
- Posts: 19
- Joined: 4 Nov 2020 10:47 am
- Location: Utah, USA
Dick,
Thank you for your following up. I am hoping to have materials supply issues sorted by April-May this year for those of you patiently waiting. It's still an uncertainty with all that's happening in the world, but I sincerely hope to get there. Thank you all for your continued patience.
Tom,
I see the overall taper in that bar - very cool. I hope to eventually be able to offer a wide range of profiles like that. If I can get more established, I will certainly entertain more custom shapes and sizes in the future. Thanks for the photo, I will definitely keep that in mind and reach out to you if it becomes a possibility. If I have extra material to work with in this next run, I will try to make a demo piece like that and see how it turns out. If you can measure the diameters and length, email the specs to me zirctone@gmail.com.
Thanks all, I will be in touch with those of you on the list as soon as I have bars ready!
Mark
Thank you for your following up. I am hoping to have materials supply issues sorted by April-May this year for those of you patiently waiting. It's still an uncertainty with all that's happening in the world, but I sincerely hope to get there. Thank you all for your continued patience.
Tom,
I see the overall taper in that bar - very cool. I hope to eventually be able to offer a wide range of profiles like that. If I can get more established, I will certainly entertain more custom shapes and sizes in the future. Thanks for the photo, I will definitely keep that in mind and reach out to you if it becomes a possibility. If I have extra material to work with in this next run, I will try to make a demo piece like that and see how it turns out. If you can measure the diameters and length, email the specs to me zirctone@gmail.com.
Thanks all, I will be in touch with those of you on the list as soon as I have bars ready!
Mark
- David Ball
- Posts: 1229
- Joined: 18 Feb 2010 1:37 pm
- Location: North Carolina High Country
My preferred lap steel and C6 neck bar right now is a Basil Henriques bar that tapers from 3/4 to 5/8 over 3 1/4" plastic bar. I'm using a Zirctone 7/8 bar for E9 and am quite happy with it.
I go back and forth between the tapered plastic bar and the BJS Byrd bar on lap steel...I'd love to try a Zirctone of either style.
Dave
I go back and forth between the tapered plastic bar and the BJS Byrd bar on lap steel...I'd love to try a Zirctone of either style.
Dave
-
- Posts: 853
- Joined: 15 Nov 1999 1:01 am
- Location: Riverside,Calif. U.S.A.
Zirctone bar
Iam interested in the 15/16 bar as well put me on the list
-
- Posts: 1178
- Joined: 28 Nov 2001 1:01 am
- Location: Vancouver Island BC Canada
Zirctone
I hope Zirctone bars will be available again soon. Please put me on the list for a 15/16 10 string bar. Thanks George Macdonald
- Tim Whitlock
- Posts: 1768
- Joined: 3 Jan 2001 1:01 am
- Location: Colorado, USA
If you make one
save me a 7/8 10 string bar
Thanks
Thanks
- Danny Sherbon
- Posts: 624
- Joined: 8 Aug 2006 12:01 am
- Location: San Angelo, TX
Bar
I’m hoping I’m still in line for a 15/16 12 string bar.
Thanks Dan Sherbon
Thanks Dan Sherbon
MSA Millennium D10, Justice SD 10 Patriot, Rittenberry Prestige,
Tonic,Quilter Mach 3, Nashville 112, Telonics and Hilton Pedal, MPX-1, Pro-Fex
Tonic,Quilter Mach 3, Nashville 112, Telonics and Hilton Pedal, MPX-1, Pro-Fex