Getting accuracy when moving the bar downward

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Post Reply
Alan Struthers
Posts: 74
Joined: 4 Jun 2020 2:22 pm
Location: New Jersey, USA

Getting accuracy when moving the bar downward

Post by Alan Struthers »

After playing for 2 years, I still have trouble hitting the fret on the nose when I move the bar down, say from the 12th to the 7th fret. The problem is that my left hand hides the frets. Is there a technique players use to see the fret and hit it accurately? Thanks in advance for your suggestions.
Gettin' better . . .
Excel ExSTAR U12, Mullen Royal Precision D-10, Sho-Bud Pro II Custom D10, GFI Student Model, Peavy Nashville 112, Fender Princeton, Gibson RB-3, Gold Tone dobro, Martin D-28, and other stuff
Donny Hinson
Posts: 21192
Joined: 16 Feb 1999 1:01 am
Location: Glen Burnie, Md. U.S.A.

Post by Donny Hinson »

With the bar at the 12th fret, you should be able to mentally "freeze" a picture of where the 7th fret is and move right to it (close enough to be in decent tune). Another problem might be if you've got your first finger in front of the bar. (But I'd have to see a shot of your left hand position to be sure.) Your first finger should be on top of the bar, so you can see the end of the bar (and the fret beneath it) out past your thumb. Make sure you're holding the bar parallel to the frets, and the hand can move anywhere. These things will all help, but continued practice is what really makes these moves easier and more accurate. 8)
Bobby D. Jones
Posts: 2235
Joined: 17 May 2010 9:27 am
Location: West Virginia, USA

Post by Bobby D. Jones »

You can not see exactly where to put the bar down. By checking the location of your hand and thumb to other frets on the guitar will get you close, Then let your ears tell you exactly where the bar should be for the notes.

Like driving a vehicle, You are used to. You can not see the tires themselves, But by viewing other parts of the car you know where the tires are, For missing pot holes or other hazards on the road.

Good Luck in a solution to this problem and Happy Steelin.
Willie Sims
Posts: 379
Joined: 28 Jun 2013 1:10 pm
Location: PADUCAH, KY, USA

Post by Willie Sims »

IF YOU CAN SEE A SMALL OPEN SPACE BETWEEN THE BAR AND THE FRET ,YOU WILL BE ON THE FRET.TRY IT AND SEE IF I AM RIGHT.
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:

Post by Ian Rae »

Bobby's tyre analogy is spot on. Know your vehicle!

It's a question of confidence. When descending, I know one thing - if I hesitate, I'll be sharp! :)

Also, if you do land a shade flat and pull up, that's kind of in the idiom of the instrument. If you land sharp there's no escape.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
User avatar
Andrew Frost
Posts: 497
Joined: 12 Feb 2014 9:46 am
Location: Toronto, Ontario

Post by Andrew Frost »

Practicing without looking at your hands at all helps.
Might be frustrating at first, but....
Put a simple song on, or a drone pitch, pick a couple positions to go between and try to do it without looking at your hands. Your ear/hand co-ordination kicks in eventually.
This is like the 'weighted bat' phenomenon. When you finally look at your hands, you will have that much more connection to what's actually happening.
You could even start doing this on one string, moving through various positions and intervals. Take your time, use your ears.
User avatar
Bob Hoffnar
Posts: 9244
Joined: 4 Aug 1998 11:00 pm
Location: Austin, Tx
Contact:

Post by Bob Hoffnar »

Check your ergonomics. Are you fishtailing the bar ? Is your left hand relaxed and are you holding your breath ? Try the Franklin bar movement exercise for 20 minutes a day very slowly. Maybe along with a drone note. If you don't land perfectly where and when you intend then you are playing a non musical mistake. Playing a perfect whole step gliss is essential and really pretty difficult. I had a rude awakening when I first started recording. I had all this stuff I thought I could do but it took 10 minutes to do a simple whole step down gliss overdub. The key is in your ears and then your hands. You are doing good though. It usually takes 3 years of serious practice before steel players even notice they are stinking up the place !
Bob
Post Reply