Milkman 50 vs 100w head

Steel guitar amplifiers, effects, etc.

Moderator: Shoshanah Marohn

Post Reply
User avatar
Andrew Frost
Posts: 497
Joined: 12 Feb 2014 9:46 am
Location: Toronto, Ontario

Milkman 50 vs 100w head

Post by Andrew Frost »

Wondering what kind of results folks have had with the white 50w head, and/or the black 100w version.

They both look and sound great from clips I've watched, but these are largely guitar based, so asking here about steel application, good speaker pairings etc.

Cheers
Andy
User avatar
Steve Lipsey
Posts: 1900
Joined: 9 May 2011 8:51 pm
Location: Portland, Oregon, USA
Contact:

Post by Steve Lipsey »

FYI, the 50 watt head is 100 watts into 4 ohms....I carry 2 speaker cabs when I want a little extra power from my 50 watt (of course, the 100 is 200 watts into 4 ohms...)

I think it is more about if you want tremolo+ reverb or reverb+boost....and how loud you typically play (stage volume)....with the XLR out you can easily add the PA for fill even if not mic'ed...personally, if I was starting from scratch, I'd get the 100, but only to get boost pedal instead of tremolo...

It doesn't seem to sound as much typically solid-state bad when pushed a bit, which does help.

Tim says that there isn't a very perceptible difference.,..

But why not chat with him about it? He's very willing to talk and has lots of experience with both....
www.facebook.com/swingaliband & a few more....
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham "CooderNator" archtop parlor electric reso w/Fishman & Lollar string-through
Ben Bonham "ResoBorn" deep parlor acoustic reso with Weissenborn neck and Fishman
Ben Bonham Style 3 Tricone., 1954 Oahu Diana, 1936 Oahu Parlor Squareneck
User avatar
Bob Hoffnar
Posts: 9244
Joined: 4 Aug 1998 11:00 pm
Location: Austin, Tx
Contact:

Post by Bob Hoffnar »

I’ve had both and I kept the 100. The extra headroom comes in handy for my work. I have more control over the gain structure for basic tone and often need to play loud. I missed the tremolo so I bought a stompbox. I don’t use the boost feature very often but it does a very cool thing with the mid range. I did a couple fly date tours before the 100 came out and the 50 was amazing. I never felt the need for anything more until there was more. So both are great when you get down to it.
Bob
Peter Leavenworth
Posts: 173
Joined: 18 Mar 2011 12:33 pm
Location: Madbury, New Hampshire, USA

Milkman 50 watt vs 100 watt head

Post by Peter Leavenworth »

Andy, I bought a Milkman Sideman 50w head a few years ago and it’s been my gig amp ever since. Tim customized the circuit board for me by omitting the tremolo section and installing depth and eq adjustments to the reverb. It has either 4 or 8 ohm speaker jacks and a treble boost and I use an in line low Z out to the PA.
I’ve experimented with several 15” speakers in open back cabinets but after I bought a ‘’66 Super Reverb ( for home use) I started experimenting with 10” combinations with the Sideman. Currently I’m using a Hartkey 210 enclosed cabinet (bc it was available) and I’m in the process of putting together two 210 cabs wired in parallel to simulate the Super speaker arrangement in a more portable configuration.
Tim has been very helpful with advice about customizing the amp as well as my putting together the speaker cabinets. The amp is terrific, ABs really well with the Super and I’ve never run out of headroom, though I have not played any arenas lately.
Pete
2008 Zum D-10, 1996 Mullen PRP D-10, 1974 Emmons D-10, 1976 Emmons D-10, early 70s Emmons GS-10, Milkman Sideman head w/Telonics 15" speaker, 1966 Fender Super Reverb, 1970 Fender Dual Showman head, Wechter/Scheerhorn and Beard Dobros, 1962 Supro lap steels, Gibson 1939 RB-11 banjo, Gibson 1978 RB-250
banjo......and way too much more
User avatar
Andrew Frost
Posts: 497
Joined: 12 Feb 2014 9:46 am
Location: Toronto, Ontario

Post by Andrew Frost »

Thanks for the input here fellas, appreciate it!
User avatar
Paul Stauskas
Posts: 400
Joined: 13 Feb 2015 11:56 am
Location: DFW, TX
Contact:

Post by Paul Stauskas »

Thanks for this thread. Has anyone compared the xlr output of both boxes? Also how are you all setting the volume and master knobs on these units when using the xlr out going direct?
Steve Mueller
Posts: 472
Joined: 18 Nov 2010 3:19 pm
Location: Cincinnati, Ohio, USA

Post by Steve Mueller »

I've been using The Amp 100 matched with a 16 OHM Jupiter speaker. Sounds wonderful in studio and live. Also the lightest rig ever!
2016 Williams D12 8 x 8, 2015 Williams D12 8 x 8, 2023 Williams S12 4 x 5, Milkman Amps, 1974 Gibson Byrdland
Post Reply