Custom Fretboard Decals
Moderator: J D Sauser
- Nicholas Thomas
- Posts: 29
- Joined: 28 Jul 2020 9:42 am
- Location: St. John's, Newfoundland, Canada
Custom Fretboard Decals
Who makes custom fretboard decals? I usually use Carter starter fretboards but I want to start using my own design for my guitars from now on! I use a 24" scale, the width at the nut is 2 11/16" and the width towards the changer end is 3 1/4".
Guitar Built by me!
- J D Sauser
- Moderator
- Posts: 2808
- Joined: 4 Aug 1998 11:00 pm
- Location: Wellington, Florida
- Contact:
Jim Palenscar at Steel Guitars Of North County (California) made me some on metal, custom.
... J-D.
... J-D.
__________________________________________________________
A Little Mental Health Warning:
Tablature KILLS SKILLS.
The uses of Tablature is addictive and has been linked to reduced musical fertility.
Those who produce Tablature did never use it.
I say it humorously, but I mean it.
A Little Mental Health Warning:
Tablature KILLS SKILLS.
The uses of Tablature is addictive and has been linked to reduced musical fertility.
Those who produce Tablature did never use it.
I say it humorously, but I mean it.
- Nicholas Thomas
- Posts: 29
- Joined: 28 Jul 2020 9:42 am
- Location: St. John's, Newfoundland, Canada
Regards,
John
Steelin' is a way of life!
1997 Carter U-12 Double Body-Natural Birdseye Maple-8p/5k, Peavey Nashville 1000 Amp, Goodrich L10K Vol. Pedal, Boss DD-3 Delay, Boss CE-5 Chorus, Behringer UMC-204HD Audio Interface, AKAI MPK Mini MK3 Professional Midi Keyboard/Controller, Gretsch Bobtail Resonator, Fender Banjo, Rondo SX Lap Steel (C6), DIY Lap Steel (Open D), a few Mojo Hand Cigar Box Guitars (MojoHandGuitars.com).
John
Steelin' is a way of life!
1997 Carter U-12 Double Body-Natural Birdseye Maple-8p/5k, Peavey Nashville 1000 Amp, Goodrich L10K Vol. Pedal, Boss DD-3 Delay, Boss CE-5 Chorus, Behringer UMC-204HD Audio Interface, AKAI MPK Mini MK3 Professional Midi Keyboard/Controller, Gretsch Bobtail Resonator, Fender Banjo, Rondo SX Lap Steel (C6), DIY Lap Steel (Open D), a few Mojo Hand Cigar Box Guitars (MojoHandGuitars.com).
-
- Posts: 2235
- Joined: 17 May 2010 9:27 am
- Location: West Virginia, USA
When I built a steel about 1970. Could not find fretboards.
Here is what I used. I cut thin plexi-glass to fit neck and laid it on a fret board, Used masking tape. Laid out diamonds for markers. Then sprayed it with white, then taped the edges and sprayed black, All paint was done on the bottom so the plexi-glass protected the paint. They have been around for 50+ years and still look good.
You could use what ever for fret markers under the plastic.
Here is what I used. I cut thin plexi-glass to fit neck and laid it on a fret board, Used masking tape. Laid out diamonds for markers. Then sprayed it with white, then taped the edges and sprayed black, All paint was done on the bottom so the plexi-glass protected the paint. They have been around for 50+ years and still look good.
You could use what ever for fret markers under the plastic.
- Jesse Valdez
- Posts: 68
- Joined: 15 Feb 2019 3:50 pm
- Location: Fiddletown, California, USA