7th String F# Raise

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Post Reply
User avatar
Don Downes
Posts: 247
Joined: 21 Oct 2021 6:51 pm
Location: New Hampshire, USA

7th String F# Raise

Post by Don Downes »

Can someone *please* tell me why there is no raise on the 7th string F# ???

It bothers me no end that it's not there when I want it.

School me.

[Moderator note - edited 4th string to 7th string to avoid confusion.]
Last edited by Don Downes on 22 Dec 2021 6:26 pm, edited 1 time in total.
Tele, Strat, Gretsch 12-string, 335, Yamaha Bass, Blues Deluxe Reissue, JC-120, Hammond BV, Yamaha MO8, DW Collector Series drums, Cubase, and more stuff
User avatar
J R Rose
Posts: 2718
Joined: 13 Mar 2009 12:39 pm
Location: Keota, Oklahoma, USA

Post by J R Rose »

Hi Don, Not sure I understand what you are talking about. The 4th string should be tuned open to E and then your 3rd pedal should raise it to F#. If an Emmons tuning and if Day tuning will be 1st pedal. J.R. Rose
Black Performance SD-10, 2002. Peavey LTD 400 with 15" Eminence EPS 15-C, Sho-Bud Seat, Goodrich L-120 Pedal, Sho-Bud Bar, Picks, Cords. Nothing else.
User avatar
Marc Jenkins
Posts: 1627
Joined: 11 Mar 2007 7:23 pm
Location: Victoria, British Columbia, Canada

Post by Marc Jenkins »

Do you mean 7th string F#?
User avatar
Tony Prior
Posts: 14522
Joined: 17 Oct 2001 12:01 am
Location: Charlotte NC
Contact:

Post by Tony Prior »

I'm certain he is referring to the 7th string . If there is NO 7 raise on your guitar, and you have the ability, then add it .

It is common practice that with a 4 or 5 lever guitar, it will have 6 lower instead of 7 raise , commonly on the right knee going left. (Emmons configuration)

Move the bell crank to align with the 7th STRING and move the rod ( same one) to the 7 RAISE.

My own preference, I placed 5 and 6 full tone lower on the Vertical and placed 7 Raise on RKL

there are no rules and no right or wrong.
Emmons L-II , Fender Telecasters, B-Benders
Pro Tools 8 and Pro Tools 12
jobless- but not homeless- now retired 8 years

CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website
User avatar
Chris Templeton
Posts: 2576
Joined: 25 Sep 2012 4:20 pm
Location: The Green Mountain State

Post by Chris Templeton »

Nice response, Tony.
Excel 3/4 Pedal With An 8 String Hawaiian Neck, Tapper (10 string with a raised fretboard to fret with fingers), Single neck Fessenden 3/5
User avatar
Jack Stoner
Posts: 22087
Joined: 3 Dec 1999 1:01 am
Location: Kansas City, MO

Post by Jack Stoner »

I've had both the 6th string lower and 7th string raise for 40 years.
RKL lowers 6th string to F# (and split with B pedal to G starting with the 82 Franklin I had).
RKR raises 7th string to G (Buddy Charleton called this his Ernest Tubb lever).
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings (all for sale as package)
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
User avatar
Larry Allen
Posts: 1321
Joined: 5 Apr 2004 12:01 am
Location: Kapaa, Kauai,Hawaii

String 7

Post by Larry Allen »

I added it (F# to G#)to my pedal 4 that raises 1 & 2 for a full chord… :D
Excel steels & Peavey amps,Old Chevys & Motorcycles & Women on the Trashy Side
User avatar
Don Downes
Posts: 247
Joined: 21 Oct 2021 6:51 pm
Location: New Hampshire, USA

Post by Don Downes »

I indeed mean the 7th string.

I really appreciate you thoughts. Tony's response was spot on.

I just need to figure out what to do.. I've spent way to many hours and dollars on my Sho Bud D-10, and this MSA that I'm really spending more time wrenching than enjoying. But some of your solutions have real merit.

I will assimilate them all in my brain, and see where it leads.
Tele, Strat, Gretsch 12-string, 335, Yamaha Bass, Blues Deluxe Reissue, JC-120, Hammond BV, Yamaha MO8, DW Collector Series drums, Cubase, and more stuff
User avatar
Don Downes
Posts: 247
Joined: 21 Oct 2021 6:51 pm
Location: New Hampshire, USA

Post by Don Downes »

My own preference, I placed 5 and 6 full tone lower on the Vertical and placed 7 Raise on RKL
I don't have a vertical Tony, but it makes a lot of sense to have the LKR raise 7 a half step rather than raise 1 a half. It's much easier to bend the bar on 1 than on 7.

It sounds crazy. I have a background in theory and have been playing keys for 60 years, but I still play be ear. Not being able to raise the II offends my ears.
Tele, Strat, Gretsch 12-string, 335, Yamaha Bass, Blues Deluxe Reissue, JC-120, Hammond BV, Yamaha MO8, DW Collector Series drums, Cubase, and more stuff
User avatar
Ricky Davis
Posts: 10964
Joined: 4 Aug 1998 11:00 pm
Location: Bertram, Texas USA
Contact:

Post by Ricky Davis »

Don; look below on my picture of my LDG E9 setup, and I don't have ANY Probs with the 7th string raise on my RKR and with a half stop feel on that lever; I raise it to G and G#....I use the HECK out of it.
Ricky
Image
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com
User avatar
Dave Mudgett
Moderator
Posts: 9648
Joined: 16 Jul 2004 12:01 am
Location: Central Pennsylvania and Gallatin, Tennessee

Post by Dave Mudgett »

If it offends you to not have that change, add it! Lots of guitars have the change. You can do that by adding it to an existing lever, as Ricky suggests, or you can add a lever.

Personally, I only have the G#=>G/G# change on two guitars: one is on a 6th lever separately, and the other is on the D-lever with the string 2 D#=>D=>C# and string 9 D=>C# pulls, as Ricky suggests. By synchronizing that string 7 pull to start with the string 9 pull, which starts exactly when string 2 starts moving from D=>C#, it gives a nice firm half-stop on string 2, which is a nice side effect.

But on a 5-lever guitar, this change doesn't cut my personal maximum marginal utility test unless I add it to the D-lever - generally, I find the string 6 G#=>F# pull more useful. In that case, I get the G note by splitting my 6th string G#=>F# pull with the B-pedal. I know this is all different than doing all this on the 7th string, but that's my factorization. YMMV.
Last edited by Dave Mudgett on 23 Dec 2021 5:14 pm, edited 1 time in total.
User avatar
Jerry Overstreet
Posts: 12622
Joined: 11 Jul 2000 12:01 am
Location: Louisville Ky

Post by Jerry Overstreet »

Put it on there. Not a big job. If you tune it a whole tone to G# with a feel stop at G, you'll get more mileage out of it. One thing with the whole tone raise is the maj7th with pedals down. You'll find other uses for it in both tones too. You'll love it.
Dean Holman
Posts: 647
Joined: 7 Dec 2007 3:50 pm
Location: Branson MO

Post by Dean Holman »

I do a lot of stuff raising the the 7th a whole to G#. I like playing it in unison with the 6th string G#. If your guitar has split tuning, you can lower the 6th string G# a whole tone, and with the B pedal, it will raise it a half step to G, which is the same as raising the 7th a half. That’s why I lke raising the 7th a whole tone, and lowering the 6th a whole tone.
User avatar
Dale Rottacker
Posts: 3513
Joined: 3 Aug 2010 6:49 pm
Location: Walla Walla Washington, USA
Contact:

Re: 7th String F# Raise

Post by Dale Rottacker »

Don Downes wrote:Can someone *please* tell me why there is no raise on the 7th string F# ???

It bothers me no end that it's not there when I want it.

School me.
I was totally unaware of this ... I love the 7th string raise. I have mine with the 1&2 string... I've had the 6th string whole lower there instead in the past and HATED it... I know some of the "Better" players have that change, but for me it was always in conflict with things I wanted to do with 1 and 2. So I have the 6th whole lower on my Vertical where also lower 9 a half. I can use them together for a 6/9 chord or separately without conflict. With the 7th string on the same lever raising 1 and 2, there is NO conflict, AND there's a nice Maj7th chord there if you also raise 9 a half. As well as pedals down strings 8>4 and the whole raise of 7... I also had, but took of, the 7th string whole raise where I lower 2 and 9 a half... It did interfere with some things there... I'm actually lowering 10 a whole there instead. The ways we manipulate 10 strings :lol: :lol: :lol:
Dale Rottacker, Steelinatune™
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
User avatar
b0b
Posts: 29108
Joined: 4 Aug 1998 11:00 pm
Location: Cloverdale, CA, USA
Contact:

Post by b0b »

Raising both F# strings to G was fairly common in the early days, probably because it was so easy to do mechanically. It was offered by several manufacturers as their standard 4th knee lever.
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
User avatar
Mark Greenway
Posts: 1503
Joined: 12 Jan 2006 1:01 am
Location: Lake Kiowa, Texas

Post by Mark Greenway »

Right now I have a pedal that raises my 6th string to a B and lowers my 7th string to an E.

So, I can raise my 6th string to twin with my 5th string and lower my 7th string to twin with my 8th string at the same time. It has a nice counterpoint move, and I have always liked the sounds of a string raising while at the same time a string is lowering. Pretty much just a lick, sort of pedal. But I sure like using it.
Jim Hoke
Posts: 393
Joined: 22 Dec 2005 1:01 am
Location: Tennessee, USA
Contact:

Post by Jim Hoke »

Both the 7 raise and the 6 lower have worlds of possibilities, especially if you tune the half-step in between. Paul raises his F#, lots of players do. Most players seem either-or on 6 and 7. I like the post by the guy who has both - LOTS of potential there.... Randy Beavers only lowers 6. I lower 6 but reading here about putting the 7 raise on something else, like the 1 and 2 raise or pedal C sounds intriguing.
Jim Hoke
Posts: 393
Joined: 22 Dec 2005 1:01 am
Location: Tennessee, USA
Contact:

Post by Jim Hoke »

Hey Mark, sounds like you can get some monstrous power chord sounds with doubled B's and doubleds E's that way. You can also bend from a triad with add 2 (B, G#, F# and E) to that huge doubled open fifth. Crazy baby! Or the reverse of that. YEOW!
User avatar
Mark Greenway
Posts: 1503
Joined: 12 Jan 2006 1:01 am
Location: Lake Kiowa, Texas

Post by Mark Greenway »

Hi Jim,
Mitchell Smithey, the MSA guitar builder and great player had that change on his guitar. When I heard him use it, I just had to have it. So I call it the Smithey Pedal. :)
Last edited by Mark Greenway on 19 Jan 2022 8:14 pm, edited 1 time in total.
Ron Pruter
Posts: 1555
Joined: 25 Feb 2011 2:47 pm
Location: Arizona, USA

Post by Ron Pruter »

Mitchell Smithey, Ah yes. I love his playing but to say he came up with that change. Every time I'd end up on the 7th string accidentally, I, like a million other player, would wish I had a bend on that string. I agree with Jerry Overstreet. Put a half step feel on that whole step change and double your pleasure. I have it synced with the 1st string. Oow La La :P
BTW, I personally hate the lower 6 one whole step change when it's combined with raising 1 and 2. I put the 7 ++ on there to octave the first string. RP
Emmons SKH Le Grande, '73 P/J bass, Tick tack bass, Regal high strung, and a Coral Sitar, USA Nashville 112.
User avatar
Mark Greenway
Posts: 1503
Joined: 12 Jan 2006 1:01 am
Location: Lake Kiowa, Texas

Post by Mark Greenway »

Ok Pruter. So who came up with that change? And I'm just curious. Do you know of anyone that HAS that change on their guitar? Or do you know of anyone that HAD that change on their guitar at one time and took it off?
User avatar
Mitchell Smithey
Posts: 274
Joined: 1 Jun 2011 9:33 am
Location: Dallas, USA

Post by Mitchell Smithey »

What Mark called the “Smithey” raises 6 string 1 1/2 tones and lowers 7 a whole tone. It’s good for special effects and contrary harmony. I don’t know where it came from but it’s a lot of fun.
I don’t have it anymore because I’m always trying something new just to get me out of my comfort zone.
Ron Pruter
Posts: 1555
Joined: 25 Feb 2011 2:47 pm
Location: Arizona, USA

Post by Ron Pruter »

Mark. Closer reading shows I was talking about the typical way people raise 7 a whole and lower 6 a whole.
I apologize for my mistake. 💝
Emmons SKH Le Grande, '73 P/J bass, Tick tack bass, Regal high strung, and a Coral Sitar, USA Nashville 112.
Post Reply