| Author |
Topic: THIS POST CAN BE CLOSED - Sierra Wing Nuts |
Ron Funk
From:
Ballwin, Missouri
|
Posted 11 Dec 2021 2:21 pm |
|
What is a good and sturdy alternate to replace these plastic "wing nuts" used on the legs and pedal rack of Sierra PSGs?
Thanks -
Ron
Last edited by Ron Funk on 12 Dec 2021 6:40 pm; edited 1 time in total |
|
|
|
Doug Taylor
From:
Shelbyville, Kentucky, USA
|
Posted 11 Dec 2021 3:57 pm
|
|
Ck with Jim Palenscar of North County. He fixed me up on some Sierra parts, great guy to deal with.
https://steelguitars.me/ |
|
|
|
Ross Shafer
From:
Petaluma, California
|
Posted 12 Dec 2021 7:50 am
|
|
| Doug is correct. Jim Palenscar has machined alumnum replacements for those finger torturing plastic ones. |
|
|
|
Pete Burak
From:
Portland, OR USA
|
Posted 12 Dec 2021 8:19 am
|
|
That part is an Allen bolt with a plastic wing nut pressed onto it. You could take that bolt to a hardware store and get a replacement, and use an Allen wrench to tighten/loosen it, or possibly find another style of plastic lever to press onto it (they use a vice to press them on, with a piece of wood to protect the threads).
I also have a Sierra Session Series with square legs like this but have never had a problem with that part.
What is the problem you are having? |
|
|
|
John Talbott
From:
Castle Rock, Colorado, USA
|
Posted 12 Dec 2021 5:42 pm
|
|
Depending if it has a fine or course thread, this may be helpful:
https://bb.steelguitarforum.com/viewtopic.php?t=307536&highlight=
_________________
Emmons LLG II
Mullen D10
EMCI RX D10
GFI Ultra D10
L120, L10k & StageOne Volume pedals
PV Spcl 130, NV112, NV400 & LTD400
Alesis Q-Verb/GT
PV TranstubeFex
Match-Bro |
|
|
|
Ron Funk
From:
Ballwin, Missouri
|
Posted 12 Dec 2021 6:39 pm This Post Can Be Closed
|
|
Thanks "Fo Bros" for generously sharing your knowledge of tips and tricks.
This Post Can Be CLOSED. |
|
|
|
