Sweet spot knee leaver Flag you can build!
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
Sweet spot knee leaver Flag you can build!
These are for a s10 push pull.
Two ways to make these in picture below.
Here in pictures shows a easy way to build a quick release knee leaver flag sometimes you need a large flag especially on left knee left on a s10 but a large flag would not fold the Quick release flag will work just loosen the screw an slip it off.
The metal in the flag is there to show how the flag attaches too a Emmons knee that’s 3/8 thick.
Just a quickie build here too help the guys that like to make there own flags.
The milled flag is neater but there’s a lot of milling with the waste you need too mill away.
These Knee flags are adjustable that’s the reason for the name sweet spot it just depends on where your knee hits the most comfortable sweet spot.
Attache’s with set screw or thumb screw no need too drill an tap holes in your knee leavers. Just find the sweet spot on your knee lever for flag too mount an slip the grooved
Flag over knee leaver an tighten set screws ::: or for fast detach an mounting flag use a 8/32 small thumb screw.
Two ways to make these in picture below.
Here in pictures shows a easy way to build a quick release knee leaver flag sometimes you need a large flag especially on left knee left on a s10 but a large flag would not fold the Quick release flag will work just loosen the screw an slip it off.
The metal in the flag is there to show how the flag attaches too a Emmons knee that’s 3/8 thick.
Just a quickie build here too help the guys that like to make there own flags.
The milled flag is neater but there’s a lot of milling with the waste you need too mill away.
These Knee flags are adjustable that’s the reason for the name sweet spot it just depends on where your knee hits the most comfortable sweet spot.
Attache’s with set screw or thumb screw no need too drill an tap holes in your knee leavers. Just find the sweet spot on your knee lever for flag too mount an slip the grooved
Flag over knee leaver an tighten set screws ::: or for fast detach an mounting flag use a 8/32 small thumb screw.
Last edited by Johnie King on 7 Oct 2020 3:44 am, edited 14 times in total.
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
Re: Sweet spot knee leaver Flag
These Knee flags are adjustable that’s the reason for the name sweet spot it just depends on where your knee hits the most comfortable sweet spot.
Attache’s with set screw or thumb screw no need too drill an tap holes in your knee leavers. Just find the sweet spot on your knee lever for flag too mount an slip the grooved
Flag over knee leaver an tighten set screws ::: or for fast detach an mounting flag use a 8/32 small thumb screw.
These will fit any steel knee lever with square or rectangle knee but the milled groove has too fit snug so the tolerance for snug fit has to be a friction fit too function right.
[/quote]
Attache’s with set screw or thumb screw no need too drill an tap holes in your knee leavers. Just find the sweet spot on your knee lever for flag too mount an slip the grooved
Flag over knee leaver an tighten set screws ::: or for fast detach an mounting flag use a 8/32 small thumb screw.
These will fit any steel knee lever with square or rectangle knee but the milled groove has too fit snug so the tolerance for snug fit has to be a friction fit too function right.
[/quote]
- Jim Fogarty
- Posts: 1382
- Joined: 14 Dec 1999 1:01 am
- Location: Phila, Pa, USA
- Contact:
- Robert Rogers
- Posts: 824
- Joined: 10 Jan 2002 1:01 am
- Location: Manchester,TN
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
- Marty Broussard
- Posts: 2378
- Joined: 18 Oct 2002 12:01 am
- Location: Broussard, Louisiana, USA
- Leo Grassl
- Posts: 853
- Joined: 5 Oct 2011 6:40 pm
- Location: Madison TN