Where could I find tuners like these ? (Rickenbacker NS)

Ba-Khai Dao · From: France

Not necessary exactly the same design, but with 4 screws like these ?

Noah Miller · From: Rocky Hill, CT

There are lots of them out there. The question is which one(s) will fit the screw and shaft holes.

https://www.stewmac.com/parts-and-hardware/tuning-machines/solid-peghead-guitar-tuning-machines/golden-age-restoration-tuners-for-solid-peghead-guitar-with-scallop-end

https://www.stewmac.com/parts-and-hardware/tuning-machines/solid-peghead-guitar-tuning-machines/economy-3-on-plate-tuners

https://www.stewmac.com/parts-and-hardware/tuning-machines/solid-peghead-guitar-tuning-machines/golden-age-restoration-tuners-for-solid-peghead-guitar-with-square-end

https://www.stewmac.com/parts-and-hardware/tuning-machines/solid-peghead-guitar-tuning-machines/golden-age-restoration-tuners-for-solid-peghead-guitar-with-bell-end

Ba-Khai Dao · From: France

Thanks, Noah. I'll probably have to drill a bit here and there to adjust the tuners to the Rick.

Lee D Kaiser · From: California, USA

How about fixing what you have? Straighten the bent shafts and put on new buttons.
_________________
If I'd stop buying old guitars to fix, I might actually learn to play.
I haven't met a guitar I didn't like.

Chris Clem · From: California, USA

I agree with (fix the originals) it is a simple job. Drilling holes in any vintage guitar is a big NO NO.

Ba-Khai Dao · From: France

The guitar came with only one of the two tuner sets… So I have to buy.

Brian Evans · From: Nova Scotia, Canada

Measure and search. The Golden Age tuners are designed to be pretty near exact replicas of the 1930's tuners used on these old babies. I just bought a set for my 1935 Dobro to replace the Klusons. Screw holes match up perfectly.

Forum Index > Steel Without Pedals		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: