| Author |
Topic: Day to Emmons on a PP |
Wayne Baker
From:
Altus Oklahoma
|
Posted 18 Sep 2021 1:54 pm |
|
How would one swap A and C pedals on a push pull to go from Day to Emmons?
_________________
Thanks,
Brother Wayne Baker
https://www.facebook.com/share/1Kg3gFeiJ1/
Show Pro D10 w9&7, Show Pro D10 w9&7, Show Pro SD10 w4&5 |
|
|
|
Wayne Baker
From:
Altus Oklahoma
|
|
|
|
Earnest Bovine
From:
Los Angeles CA USA
|
Posted 18 Sep 2021 4:53 pm
|
|
This will do it if you only need 2 pedals:
 |
|
|
|
Earnest Bovine
From:
Los Angeles CA USA
|
Posted 18 Sep 2021 4:54 pm
|
|
And this will do it if you need 3 pedals:
 |
|
|
|
Wayne Baker
From:
Altus Oklahoma
|
|
|
|
Mike Vallandigham
From:
Martinez, CA
|
Posted 20 Sep 2021 11:25 am
|
|
It should be pretty easy, since you already have two bell cranks on each pedal shaft, and two pull rods for each pedal that are the right length, and the two pull hooks.
A matter of moving the bell cranks to the right alignment and swapping the pull rods. Then re-adjust the pedal travel then the collars. Might be good to take a photo first of the shock springs and collar locations.
Good luck! (you don't need it, it's simple.) |
|
|
|
Wayne Baker
From:
Altus Oklahoma
|
Posted 20 Sep 2021 12:11 pm Emmons D10 PP
|
|
Thanks Mike. I have completely disassembled the mechanism on a pp before, but never set up changes. Looks like it shouldn't be too bad. It's an 82 model. I might contact you if when I run into trouble.
_________________
Thanks,
Brother Wayne Baker
https://www.facebook.com/share/1Kg3gFeiJ1/
Show Pro D10 w9&7, Show Pro D10 w9&7, Show Pro SD10 w4&5 |
|
|
|
Mike Vallandigham
From:
Martinez, CA
|
Posted 20 Sep 2021 1:01 pm
|
|
Hey Wayne,
I'm no pro, but I've successfully changed some things around. I also have a good little stash of Emmons set-up papers books -well book - If you need anything.
Swapping those pedals should be no problem for you. |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 20 Sep 2021 7:09 pm
|
|
If the Left Knee Levers are set up to raise and lower the 4 & 8 strings they will need to be changed also. With the Emmons Setup needs to have the 4 & 8 string raise on the LKL. If not your foot will have to roll left and your knee move right for the A pedal raise, And 4 & 8 E raise.
2 guitars I have bought set up Emmons I had to change the knee levers to go to Day Setup. I Play Day setup. [/list] |
|
|
|
