Mic placement when Mic-ing an amp
Moderator: Shoshanah Marohn
Mic placement when Mic-ing an amp
Is there some way to monitor, in real time, the sound while trying to find the optimum mic placement for recording an amp?
Right now, I am positioning the mic, recording it through my Sonus Studio 68c into Studio One 5. Then, I play it back and listen to the recording. I keep each track and notes for that track to compare between different mic positions.
It would be a time saver to just move the mic and judge the effect of mic placement in real time. How do I do it?
I have heard it said, "A fair mic in a great position is better than a great mic in a fair position."
Right now, I am positioning the mic, recording it through my Sonus Studio 68c into Studio One 5. Then, I play it back and listen to the recording. I keep each track and notes for that track to compare between different mic positions.
It would be a time saver to just move the mic and judge the effect of mic placement in real time. How do I do it?
I have heard it said, "A fair mic in a great position is better than a great mic in a fair position."
blah, blah, blah.
Hey You Kids! Get Off My Lawn!
blah, blah, blah.
Hey You Kids! Get Off My Lawn!
blah, blah, blah.
Not really, but you could refine your approach by rigging a second mic and making verbal notes as you try different positions.
You could then edit out the rumbling and fiddling about to give a fairly slick comparison. The ear has a short memory, so the tighter the better.
You could then edit out the rumbling and fiddling about to give a fairly slick comparison. The ear has a short memory, so the tighter the better.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
- Bill Terry
- Posts: 2786
- Joined: 29 Apr 1999 12:01 am
- Location: Bastrop, TX
Tommy Detamore had some sort of gizmo on demo from the manufaturer a year or two back, that was a 'remote controlled' mic adjuster.. It sat in this fixture that moved the mic along both x and y axis remotely, i.e. in and out, and left and right. It had some kind of mix position control, so you could hear the sound as the mic position changed without getting up and moving it by hand.
Maybe he'll see this, I can't remember the name of the company.. I'm sure it wasn't cheap, and that may not really be what you want, but it was kinda cool.
Maybe he'll see this, I can't remember the name of the company.. I'm sure it wasn't cheap, and that may not really be what you want, but it was kinda cool.
Lost Pines Studio
"I'm nuts about bolts"
"I'm nuts about bolts"
-
- Posts: 274
- Joined: 17 Jan 2012 8:04 am
- Location: Midland, Texas, USA
- Contact:
- Bill Terry
- Posts: 2786
- Joined: 29 Apr 1999 12:01 am
- Location: Bastrop, TX
The Dynamount is the one Tommy had.. it was kinda cool.
https://dynamount.com/products/axial/
.. and here's a video he did that they had on the web page for a while:
http://www.lostpinesstudio.com/mp4/Dynamount.mp4
https://dynamount.com/products/axial/
.. and here's a video he did that they had on the web page for a while:
http://www.lostpinesstudio.com/mp4/Dynamount.mp4
Mine is called a wife... but her work hours are a bit difficult to accommodate.Mine is called an assistant engineer...
Lost Pines Studio
"I'm nuts about bolts"
"I'm nuts about bolts"
- Rick Campbell
- Posts: 4283
- Joined: 8 May 2006 12:01 am
- Location: Sneedville, TN, USA
That's a neat rig. I can see myself building a setup using a SM-57 and some kind of kids remote control toy, or maybe a pan/zoom wifi camera. I'm cheap.Bill Terry wrote:The Dynamount is the one Tommy had.. it was kinda cool.
https://dynamount.com/products/axial/
.. and here's a video he did that they had on the web page for a while:
http://www.lostpinesstudio.com/mp4/Dynamount.mp4
Mine is called a wife... but her work hours are a bit difficult to accommodate.Mine is called an assistant engineer...
That video is great just to compare the effects of different mic position. Thanks for posting.
RC
- Rick Campbell
- Posts: 4283
- Joined: 8 May 2006 12:01 am
- Location: Sneedville, TN, USA
Great stuff. Thanks for your input. I appreciate your replies.
That video from Lost Pines Studio was enlightening. It is a very cool demo! What a difference a small move in mic placement makes.
I have a great assistant engineer / wife... but she hates to be told what to do. "OK, honey, 1/2" to the left... 1 inch to the right... OK up a little." That would last for about 10 seconds!
The Dynamount website has a number of very interesting video links. I can imagine that their product line has a bright future.
Thanks again to all who responded.
That video from Lost Pines Studio was enlightening. It is a very cool demo! What a difference a small move in mic placement makes.
I have a great assistant engineer / wife... but she hates to be told what to do. "OK, honey, 1/2" to the left... 1 inch to the right... OK up a little." That would last for about 10 seconds!
The Dynamount website has a number of very interesting video links. I can imagine that their product line has a bright future.
Thanks again to all who responded.
Last edited by Dan Kelly on 16 Jan 2021 8:54 am, edited 1 time in total.
blah, blah, blah.
Hey You Kids! Get Off My Lawn!
blah, blah, blah.
Hey You Kids! Get Off My Lawn!
blah, blah, blah.
- Bill Terry
- Posts: 2786
- Joined: 29 Apr 1999 12:01 am
- Location: Bastrop, TX
To be very clear, I had a copy of that video I got from Tommy, that I just shared via my website. I had nothing to do with any of that excellent production. I did ask him if it was ok to share, and he was of course fine with that.That video from Lost Pines Studio was enlightening.
Tommy's place has turned into one of the go-to recording studios for traditional country artists around Texas as well as from places all over the US and Europe.
https://www.cherryridgestudio.com/
Lost Pines Studio
"I'm nuts about bolts"
"I'm nuts about bolts"
- Rick Campbell
- Posts: 4283
- Joined: 8 May 2006 12:01 am
- Location: Sneedville, TN, USA
For good reason. Tommy is the best. He knows the whole process and how to make it all work. Traditional country music has a great friend and mentor in Tommy Detamore.Bill Terry wrote:To be very clear, I had a copy of that video I got from Tommy, that I just shared via my website. I had nothing to do with any of that excellent production. I did ask him if it was ok to share, and he was of course fine with that.That video from Lost Pines Studio was enlightening.
Tommy's place has turned into one of the go-to recording studios for traditional country artists around Texas as well as from places all over the US and Europe.
https://www.cherryridgestudio.com/
RC
I wish I could get back those hours I spent moving mics like that . A good friend of mine did a ton of those guitar band records in LA and spent hours and days in the studio moving mics like that. But his favorite guitar sound record was one they were strapped for time and just put the mics in the appropriate places and never touched them. Best sounding guitar record he ever made. Most session players know their sweet spots on their amp and I know the ones on our extensive amp collection, so I hardly ever move mics on an amp unless there is an obvious problem. My favorite electric guitar mic is made by a company in South Africa named Tul Microphones, and it is made to go directly in the center of the cone right on the grill cloth, where you normally would never put a mic. It’s made to work there, and only there and it’s amazing. Plus you never have to wonder where to put it!!
John Macy
Rockport, TX
Engineer/Producer/Steel Guitar
Rockport, TX
Engineer/Producer/Steel Guitar
- Godfrey Arthur
- Posts: 2997
- Joined: 12 Dec 2012 5:46 pm
- Location: 3rd Rock
Some would say, "use the force" and just use your intuition.
If you use headphones enough you would be able to tell using those. It's hit and miss and will always be a little different per song.
Here's guide clip made by my friend Brian Wampler.
https://www.youtube.com/watch?v=jcnXKXIZxLg
If you use headphones enough you would be able to tell using those. It's hit and miss and will always be a little different per song.
Here's guide clip made by my friend Brian Wampler.
https://www.youtube.com/watch?v=jcnXKXIZxLg
Last edited by Godfrey Arthur on 16 Feb 2021 8:34 am, edited 1 time in total.
ShoBud The Pro 1
YES it's my REAL NAME!
Ezekiel 33:7
YES it's my REAL NAME!
Ezekiel 33:7
- Glenn Demichele
- Posts: 661
- Joined: 11 Oct 2012 8:55 am
- Location: (20mi N of) Chicago Illinois, USA
What about recording a repeating steel part straight into the board, then play it back through the amp while you (or someone else) fiddles with placement with you with your headphones on? I have trouble judging recorded tone while I’m playing.
Franklin D10 8&5, Excel D10 8&5, homemade buffer/overdrive, Moyo pedal, GT-001 effects, 2x BAM200 for stereo. 2x GW8003 8" driver in homemade closed-box. Also NV400 etc. etc...
Time saver tip for the day: Do yourself a favor and get either a Friedman MicNoMo or a Palmer PDI-09 (harder to find and about the same thing).
They're each in the $100-125 range, about the price of a decent mic.
There are other devices out there that are the same thing, but I'll leave it to you to do your own research.
NOTE: They are NOT load boxes. They are DI boxes that are meant to go between the amp and speaker. This is ESPECIALLY critical for tube amps.
Since almost everybody these days is using a DAW, you basically have unlimited tracks to use. So....
Mic your amp any way you want and run it to one track.
Set the couple of settings on the above mentioned DI boxes and record them on another track using the XLR out. Done.
Now you can pick which track you want, or mix them together.
You may need to tweak the phase of one track in your DAW, adjust the EQ, etc etc etc.
Does it sound exactly like a well mic'ed amp? Maybe, maybe not.
Does it sound better, or worse? Maybe, maybe not.
However, no more mic placement issues. Potentially a huge amount of time saved. Repeatable.
And.....especially for tube amp users.......if you get a load box or attenuator so that your tube amp always sees a load, you can also do silent recording.
They're each in the $100-125 range, about the price of a decent mic.
There are other devices out there that are the same thing, but I'll leave it to you to do your own research.
NOTE: They are NOT load boxes. They are DI boxes that are meant to go between the amp and speaker. This is ESPECIALLY critical for tube amps.
Since almost everybody these days is using a DAW, you basically have unlimited tracks to use. So....
Mic your amp any way you want and run it to one track.
Set the couple of settings on the above mentioned DI boxes and record them on another track using the XLR out. Done.
Now you can pick which track you want, or mix them together.
You may need to tweak the phase of one track in your DAW, adjust the EQ, etc etc etc.
Does it sound exactly like a well mic'ed amp? Maybe, maybe not.
Does it sound better, or worse? Maybe, maybe not.
However, no more mic placement issues. Potentially a huge amount of time saved. Repeatable.
And.....especially for tube amp users.......if you get a load box or attenuator so that your tube amp always sees a load, you can also do silent recording.
- Bob Hoffnar
- Posts: 9244
- Joined: 4 Aug 1998 11:00 pm
- Location: Austin, Tx
- Contact:
- Bob Hoffnar
- Posts: 9244
- Joined: 4 Aug 1998 11:00 pm
- Location: Austin, Tx
- Contact:
The main problem areas to listen for is the proximity effect where you pick up way too much low end. And the spike/beam in the highs that moves directly out of the cone. If you use two mics you get to deal with phasing. Those sound problems are pretty obvious once you notice them.
You can fix that stuff with eq but it can sound much better if you don’t create those problems at the source.
You can fix that stuff with eq but it can sound much better if you don’t create those problems at the source.
Bob
To sort of twist what Bob Hoffnar said about using two mics.......
If you buy two of the DI boxes that I mentioned, you could connect them in series, and set them to different cabinet/mic/whatever types and record those individually to separate tracks.
Then you could mix them as required later.
And if you still use a mic, you could add that in as well, giving you three different sources.
If you buy two of the DI boxes that I mentioned, you could connect them in series, and set them to different cabinet/mic/whatever types and record those individually to separate tracks.
Then you could mix them as required later.
And if you still use a mic, you could add that in as well, giving you three different sources.
And something else to consider-when you have a tracking session with 5-7 musicians showing up for a 10AM downbeat, there is little time for mic moving and looking for a sweet spot. You use your go-to mic and put in the place that works most often (halfway between the cone and the edge, with the exception of the TUL mic) and get after it, unless there is something obviously wrong. I have recorded many of the top session guitarists and never moved a mic on them (sometimes they will tell you a certain speaker sounds better in a multi speaker cabinet).
I miss certain aspects of the old days. On tape, you had a track for a guitar part, and if you wanted to use more than one mic, you combined them and printed it. I do a lot of remote mixing these days, and the unlimited amount of tracks makes commitment less likely, I get guitar parts with 5 tracks-a dynamic, condenser and ribbon mic with a close and far room mic. Multiply that by 6 guitar parts and all of a sudden I have 30 tracks to sort through. Big pain...
I miss certain aspects of the old days. On tape, you had a track for a guitar part, and if you wanted to use more than one mic, you combined them and printed it. I do a lot of remote mixing these days, and the unlimited amount of tracks makes commitment less likely, I get guitar parts with 5 tracks-a dynamic, condenser and ribbon mic with a close and far room mic. Multiply that by 6 guitar parts and all of a sudden I have 30 tracks to sort through. Big pain...
John Macy
Rockport, TX
Engineer/Producer/Steel Guitar
Rockport, TX
Engineer/Producer/Steel Guitar
- Cappone dAngelo
- Posts: 86
- Joined: 20 Dec 2020 10:19 pm
- Location: Vancouver, BC, Canada
I was just thinking back about all the steel players I have recorded over the years including Lloyd Green, Jay Dee Maness, Buddy Emmons, Paul Franklin, Sonny Garrish, John Hughey, Jimmie Crawford, Dan Dugmore, Bruce Bouton and others, and realized I never moved a microphone from its initial placement at the session. Upon listening to playback, I never had a request for something different. The vast majority of those sessions utilized a Sennheiser 421 (though some had others and a few were direct). The mic would have been placed about halfway between the center and the edge of the speaker. Just a thought.
John Macy
Rockport, TX
Engineer/Producer/Steel Guitar
Rockport, TX
Engineer/Producer/Steel Guitar
- Bill Terry
- Posts: 2786
- Joined: 29 Apr 1999 12:01 am
- Location: Bastrop, TX
Ok, so it's not necessarily just a mic, or mic technique... what else could all those players have in common that allowed such consistently excellent results???I never moved a microphone from its initial placement at the session.
Whatever it is, I'll bet you can't buy it at Sweetwater..
Lost Pines Studio
"I'm nuts about bolts"
"I'm nuts about bolts"