Rod Extenders for Emmons Legrande III
Robbie Bossert
Rod Extenders for Emmons Legrande III
-
- Posts: 1588
- Joined: 5 Feb 2000 1:01 am
- Location: WESCOSVILLE,PA,U.S.A.
Rod Extenders for Emmons Legrande III
Emmons LeGrande III Pedal Steel. '54 Gibson lap steel, Peavey Nashville 1000, Nashville 400, Telecaster,Banjo, Peavey Power slide Lap Steels ,Effects, and other assorted crap.....
-
- Posts: 3139
- Joined: 11 Aug 1999 12:01 am
- Location: Los Angeles, California USA
McMaster Carr has them.
Standoffs.
Hex aluminum
3/8ths
You likely have 8/32 threads
You can get extenders or just new hexes to replace your current hexes. You will need to drill the pedal mount hole and remove the male threaded stub on the new hex.
McMaster Carr also sells the leg spacers too. Aluminum round.
Standoffs.
Hex aluminum
3/8ths
You likely have 8/32 threads
You can get extenders or just new hexes to replace your current hexes. You will need to drill the pedal mount hole and remove the male threaded stub on the new hex.
McMaster Carr also sells the leg spacers too. Aluminum round.
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars.
Red Bellies, Bigsbys and a lot of other guitars.
-
- Posts: 264
- Joined: 16 Jan 2008 3:28 pm
- Location: Muncy Valley, Pennsylvania