What the weight on the different D-10`s?
Moderator: Shoshanah Marohn
- Rick Schmidt
- Posts: 3258
- Joined: 4 Aug 1998 11:00 pm
- Location: Prescott AZ, USA
Bottom line is 50 Lbs maximum for for one piece of luggage here in the states. Most flights only allow 2 pc check in and 2 pc carry on. Anything else will cost you.
Don't know what the limits are for the smaller Euro airlines like Ryan Air or Easy Jet are these days, but my experience was that they would'nt cut any slack whatsoever.
I did a gig with Gerry Hogan last year, and they charged the equivalent of $600 (or more?) to fly his D10 JCH from London to Holland. A relatively short trip. It was such a shock, that we had to re-route the whole rest of the trip to driving the steel back to the UK.
This is a big reason why I'm only taking gigs as a bass player when flying is involved.
A one or two way trip is one thing, but an entire tour is quite another.
I'm a dyed in the wool double neck player, but if I were to ever get a serious flying gig again, I'd be seriously looking at an MSA U12.
Good luck Dag!!
Rick (owner of the worlds heaviest D12 Dekley 10+6)<font size="1" color="#8e236b"><p align="center">[This message was edited by Rick Schmidt on 21 June 2006 at 02:48 PM.]</p></FONT>
Don't know what the limits are for the smaller Euro airlines like Ryan Air or Easy Jet are these days, but my experience was that they would'nt cut any slack whatsoever.
I did a gig with Gerry Hogan last year, and they charged the equivalent of $600 (or more?) to fly his D10 JCH from London to Holland. A relatively short trip. It was such a shock, that we had to re-route the whole rest of the trip to driving the steel back to the UK.
This is a big reason why I'm only taking gigs as a bass player when flying is involved.
A one or two way trip is one thing, but an entire tour is quite another.
I'm a dyed in the wool double neck player, but if I were to ever get a serious flying gig again, I'd be seriously looking at an MSA U12.
Good luck Dag!!
Rick (owner of the worlds heaviest D12 Dekley 10+6)<font size="1" color="#8e236b"><p align="center">[This message was edited by Rick Schmidt on 21 June 2006 at 02:48 PM.]</p></FONT>
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
- James Morehead
- Posts: 6944
- Joined: 19 May 2003 12:01 am
- Location: Prague, Oklahoma, USA - R.I.P.
-
- Posts: 829
- Joined: 16 Aug 2005 12:01 am
- Location: Ramsey Illinois, USA Hometown of Tex Williams
- Per Berner
- Posts: 1808
- Joined: 10 Aug 2004 12:01 am
- Location: Skövde, Sweden
- Contact:
I think that todays steels are made as light as they can get them.Look at the different kind of materials builders are using.
Builders try everything to get the weight of the steel guitar down and still sell a good looking and sounding Steel guitar.
Ron<font size="1" color="#8e236b"><p align="center">[This message was edited by Ronald ! on 22 June 2006 at 03:20 AM.]</p></FONT>
Builders try everything to get the weight of the steel guitar down and still sell a good looking and sounding Steel guitar.
Ron<font size="1" color="#8e236b"><p align="center">[This message was edited by Ronald ! on 22 June 2006 at 03:20 AM.]</p></FONT>
- Fred Justice
- Posts: 6586
- Joined: 16 Jan 2003 1:01 am
- Location: Mesa, Arizona
Like Reece Anderson stated, the weight issue for the pedal steel has pretty much been settled and the ball is in the field of the case builder.
I build cases for a lot of different PSG, and done a lot of test runs and research prior to coming up with the case I now produce. My finding are that if you just want something to carry your PSG around in, a 2 pound gig bag will work. However, if you want to protect your PSG while carrying it around, a hard case is the way to go.
The bottom line here, if you want to take the risk out of damage to you PSG you need a case with some strength to it and strength = lb's. Our case weight's in at 19.0
(average weight)and has the strength to carry and protect your PSG under normal every day use. If you get any lighter, you lose strength.
------------------
Fred Justice,
Fred's Music www.fredjusticemusic.com
Rains Steel Guitars
I build cases for a lot of different PSG, and done a lot of test runs and research prior to coming up with the case I now produce. My finding are that if you just want something to carry your PSG around in, a 2 pound gig bag will work. However, if you want to protect your PSG while carrying it around, a hard case is the way to go.
The bottom line here, if you want to take the risk out of damage to you PSG you need a case with some strength to it and strength = lb's. Our case weight's in at 19.0
(average weight)and has the strength to carry and protect your PSG under normal every day use. If you get any lighter, you lose strength.
------------------
Fred Justice,
Fred's Music www.fredjusticemusic.com
Rains Steel Guitars
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
If you want the guitar w/case to weight less, consider split cases.
Guitar in one case and legs, pedal bar and rods in another.
I have a D-10 Fulawka, which is quite heavy and that's the way Ed Fulawka handles the situation. <font size="1" color="#8e236b"><p align="center">[This message was edited by Erv Niehaus on 22 June 2006 at 07:51 AM.]</p></FONT>
Guitar in one case and legs, pedal bar and rods in another.
I have a D-10 Fulawka, which is quite heavy and that's the way Ed Fulawka handles the situation. <font size="1" color="#8e236b"><p align="center">[This message was edited by Erv Niehaus on 22 June 2006 at 07:51 AM.]</p></FONT>
- David Doggett
- Posts: 8088
- Joined: 20 Aug 2002 12:01 am
- Location: Bawl'mer, MD (formerly of MS, Nawluns, Gnashville, Knocksville, Lost Angeles, Bahsten. and Philly)
As I understand Reece and Johnny C., it's not the kind of stability problem that splaying the legs will help. It's that you don't want the instrument to lift or scoot across the floor when you hit the levers.
------------------
<font size="1">Student of the Steel: Zum uni, Fender tube amps, squareneck and roundneck resos, tenor sax, keyboards
<font size="1" color="#8e236b"><p align="center">[This message was edited by David Doggett on 22 June 2006 at 08:12 AM.]</p></FONT>
------------------
<font size="1">Student of the Steel: Zum uni, Fender tube amps, squareneck and roundneck resos, tenor sax, keyboards
<font size="1" color="#8e236b"><p align="center">[This message was edited by David Doggett on 22 June 2006 at 08:12 AM.]</p></FONT>
-
- Posts: 1172
- Joined: 13 Mar 2006 1:01 am
- Location: Cincinnati, Ohio,
-
- Posts: 573
- Joined: 15 Nov 2000 1:01 am
- Location: Buna, TX
- Willis Vanderberg
- Posts: 2389
- Joined: 13 Mar 2002 1:01 am
- Location: Petoskey Mi
- Randy Beavers
- Posts: 1291
- Joined: 4 Nov 1998 1:01 am
- Location: Lebanon,TN 37090
- Contact:
-
- Posts: 6429
- Joined: 22 Jul 2003 12:01 am
- Location: Bradford, Pa. Frozen Tundra
- John Bechtel
- Posts: 5103
- Joined: 1 Jul 2002 12:01 am
- Location: Nashville, Tennessee, R.I.P.
My 2000 D–10 GFI Ultra Keyless w/9 & 8 weighed a whopping 67# in the case and my 2001 D–10 Franklin w/9 & 8 weighed 62# in the case. My 2005 D–10 Derby w/6 & 8 weighs almost 62# in the case. I put wheels on the GFI, so; I guess 62# is my allowable~wieght-limit! But, if it was a sack of RICE; there's no way for me to carry either one comfortably! (a wheel~barrow!)
------------------
“Big John”
a.k.a. {Keoni Nui}
Current Equipment
------------------
“Big John”
a.k.a. {Keoni Nui}
Current Equipment
- Paddy Long
- Posts: 5462
- Joined: 19 Aug 2003 12:01 am
- Location: Christchurch, New Zealand
Hey Dag, I just flew over to Brisbane for the steel show there on the weekend with my Zum --- because they have a weight limit of 32 kgs (if it's more than that they won't lift it), I had to pull the leg and rod bag out of the case. The case is a Bob Dell wheeled roadcase and without the legs and rods it came to 29.5 kgs!, they just put my leg/rod bag in a big plastic bag, taped it up and put that in the baggage as an extra bag ! .....