I'm new to the forum and need some information
Moderator: Brad Bechtel
-
- Posts: 18
- Joined: 21 Dec 2020 10:15 am
- Location: Kansas, USA
I'm new to the forum and need some information
I recently bought a T-8 three neck console Fender steel guitar and would like to try and date it, it has #9901 near the output jack. I believe it was made in the early 1950's. Also, would like suggestions for a volume pedal? Thanks so much.
- Nic Neufeld
- Posts: 1319
- Joined: 25 Sep 2017 8:10 am
- Location: Kansas City, Missouri
First question, what are the pickups? Twin per neck, or trapezoid chrome ones by the bridge? That'll tell you whether it is a Stringmaster or a Custom (respectively).
As for dating...you can do pot dating (not as accurate due to possible replacement and pot manufacture not necessarily equalling the guitar manufacture date) but by far your best bet is to remove tuner pans and look for a pencil'ed date under the pans on the unfinished wood. That's usually the easiest way to date them.
As for dating...you can do pot dating (not as accurate due to possible replacement and pot manufacture not necessarily equalling the guitar manufacture date) but by far your best bet is to remove tuner pans and look for a pencil'ed date under the pans on the unfinished wood. That's usually the easiest way to date them.
Waikīkī, at night when the shadows are falling
I hear the rolling surf calling
Calling and calling to me
I hear the rolling surf calling
Calling and calling to me
-
- Posts: 18
- Joined: 21 Dec 2020 10:15 am
- Location: Kansas, USA