JOHN NORRIS, SORRY HERE I GO AGAIN.John Norris wrote:Hi John,John Sluszny wrote:I’d love to get the MA9 tuning but I’m afraid of this !
See photo here under. See note.
Help please.
Thanks !
You never lose your factory Sweeteners, the factory settings cannot be erased no matter what you do.
They just "live" in a different area of the tuner's memory when you load a custom Sweetener into the StroboPLUS.
The tuner stores custom Sweeteners in the user configuration section, and factory Sweeteners in the Factory section.
If there are only a few custom Sweeteners in the User configuration section, that's all you will see, initially.
However:
You can swap over and back between the user and the factory configuration pretty easily on the tuner itself (see below).
But it's much more convenient to populate the tuner's User configuration with *all* the Sweeteners you need (factory or custom or a mix of both), omitting the ones you don't need.
That way everything is on one Sweetener list and more convenient, we call this a custom configuration as opposed to the factory configuration.
This user configuration is also stored on the Peterson server, should you ever acquire another Peterson, you can load an identical configuration onto that tuner too, so you can never lose anything, even custom settings.
How to swap configurations:
The StroboPLUS HD has two modes, FDR (factory default settings) and USR (custom user settings + selected factory settings if desired).
While the unit is powered on, hold down the power button and then the mode button together momentarily (power button slightly ahead of mode)
You'll see a screen with a large C and 3 characters in the upper right corner. Press in on the dial. 3 characters will flash.
The characters will either show USR or FDR.
When either is flashing, rotate the dial to select the other.
I would advise you to configure your tuner, selecting all the Sweeteners and settings you want to be able to quickly and conveniently recall and load that into the tuner.
The configuration page is here:
https://www.petersontuners.com/configure/
As you can see it’s loaded but I can’t find it ! Where is it ? Please some more help. Thank you...again