Are sweetened tuning offsets wrt equal temperament?
Moderator: Shoshanah Marohn
-
- Posts: 25
- Joined: 23 Jan 2019 9:33 am
- Location: United Kingdom
Are sweetened tuning offsets wrt equal temperament?
I'm new to this and experimenting with sweetened tunings.
I guess that sweetened tuning offsets are specified wrt equal temperament?
I can’t believe sweetened tuning offsets are specified wrt just intonation, because tuners do not all offer it, although part of my brain feels that would strictly make the most sense.
Thank you!
I guess that sweetened tuning offsets are specified wrt equal temperament?
I can’t believe sweetened tuning offsets are specified wrt just intonation, because tuners do not all offer it, although part of my brain feels that would strictly make the most sense.
Thank you!
- Michael Douchette
- Moderator
- Posts: 3458
- Joined: 4 Aug 1998 11:00 pm
- Location: Gallatin, TN (deceased)
- Contact:
And 7 cents flat is just plain flat. Period.
Mikey D... H.S.P.
Music hath the charm to soothe a savage beast, but I'd try a 10mm first.
http://www.steelharp.com
http://www.thesessionplayers.com/douchette.html
(other things you can ask about here)
http://s117.photobucket.com/albums/o54/Steelharp/
Music hath the charm to soothe a savage beast, but I'd try a 10mm first.
http://www.steelharp.com
http://www.thesessionplayers.com/douchette.html
(other things you can ask about here)
http://s117.photobucket.com/albums/o54/Steelharp/
No, it's relative. In just intonation a lot of notes are flat relative to equal temperament, but they sound in tune.Michael Douchette wrote:And 7 cents flat is just plain flat. Period.
Equal temperament is just a way of distributing discord fairly.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
-
- Posts: 705
- Joined: 28 Apr 2005 12:01 am
- Location: Martinez, CA
-
- Posts: 25
- Joined: 23 Jan 2019 9:33 am
- Location: United Kingdom
Thank you folks!
I tried the Newman tuning and preferred it to unsweetened in many chords but found a few nasty dissonances (as I perceived them) - especially the 4th string in BC pedal (root 7 string) minor chords & in some harmonies involving the F pedal. I'm not assuming other folks don’t do way better than I!
I then tried the 'compromise' sweetened tuning rounded to 5 cent increments which has been advocated here and, based on just a few hours playing, it's a keeper: no imperfection sour enough to bug me and, well, overall very much sweeter than unsweetened
https://bb.steelguitarforum.com/viewtopic.php?t=334580
I tried the Newman tuning and preferred it to unsweetened in many chords but found a few nasty dissonances (as I perceived them) - especially the 4th string in BC pedal (root 7 string) minor chords & in some harmonies involving the F pedal. I'm not assuming other folks don’t do way better than I!
I then tried the 'compromise' sweetened tuning rounded to 5 cent increments which has been advocated here and, based on just a few hours playing, it's a keeper: no imperfection sour enough to bug me and, well, overall very much sweeter than unsweetened
https://bb.steelguitarforum.com/viewtopic.php?t=334580
What Mike said! Just like on a 6 string guitar, ya gotta back off the G string just a hair! Many pros have told me this, & after trying all the sweets, this IS the best I've found.Mike Vallandigham wrote:I'v never really had a problem with steel sounding out of tune when tuned straight up, but I always drop the G# strings 3-4 cents. Seems to make it better.
My 2 cents.
Thx, Pat
- Fred Treece
- Posts: 3920
- Joined: 29 Dec 2015 3:15 pm
- Location: California, USA
Re: Are sweetened tuning offsets wrt equal temperament?
I’ve read through a lot of discussions here on preferred tuning methods, but have never seen “wrt†mentioned before. Pardon my ignorance, but what is it?Robert Fawcett wrote:I'm new to this and experimenting with sweetened tunings.
I guess that sweetened tuning offsets are specified wrt equal temperament?
- Andrew Frost
- Posts: 497
- Joined: 12 Feb 2014 9:46 am
- Location: Toronto, Ontario
Robert, the F# note ( and related chords) presents a unique tuning challenge on E9.
Every player has a different way of dealing with it and there is no right or wrong way about it.
In pure tuning systems based on natural overtones, some notes of the scale sit a little flatter or sharper than others, when compared to ET.
In a nutshell, the Maj 6 of any key sits quite low, while a 9th will be on the sharp side.
Our dilemma is that in an E chord/scale and in an A chord/scale, that F# has 2 totally different functions.
F# wants to sit lower in A (pedals down) as a 6th but sounds better tuned sharper against the E chord as a 9th.
So consequently, tuning the F#m w BC pedals will become a challenge because those F# notes have to be in agreement, so to speak.
If one of the F#s is tuned to the A6 chord tonality but another F# is tuned to the E chord, the F#m chord you speak of will be out of tune.
Every player has a different way of dealing with it and there is no right or wrong way about it.
In pure tuning systems based on natural overtones, some notes of the scale sit a little flatter or sharper than others, when compared to ET.
In a nutshell, the Maj 6 of any key sits quite low, while a 9th will be on the sharp side.
Our dilemma is that in an E chord/scale and in an A chord/scale, that F# has 2 totally different functions.
F# wants to sit lower in A (pedals down) as a 6th but sounds better tuned sharper against the E chord as a 9th.
So consequently, tuning the F#m w BC pedals will become a challenge because those F# notes have to be in agreement, so to speak.
If one of the F#s is tuned to the A6 chord tonality but another F# is tuned to the E chord, the F#m chord you speak of will be out of tune.
- Jim Fiegen
- Posts: 30
- Joined: 30 Aug 2017 12:57 pm
- Location: California, USA
- Contact:
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
Re: Are sweetened tuning offsets wrt equal temperament?
In this case, probably short for "in regards to...".Fred Treece wrote: I’ve read through a lot of discussions here on preferred tuning methods, but have never seen “wrt†mentioned before. Pardon my ignorance, but what is it?
And sometimes, "Want to respond to..."
Lots of others, but these are the biggies on BB sites.
- Fred Treece
- Posts: 3920
- Joined: 29 Dec 2015 3:15 pm
- Location: California, USA
Re: Are sweetened tuning offsets wrt equal temperament?
Ah. Text shorthand. Well, that’s disappointingly dull! I thought it was abbreviation for something alien, like Wavelength Range Threshhold.Donny Hinson wrote:In this case, probably short for "in regards to...".Fred Treece wrote: I’ve read through a lot of discussions here on preferred tuning methods, but have never seen “wrt†mentioned before. Pardon my ignorance, but what is it?
And sometimes, "Want to respond to..."
Lots of others, but these are the biggies on BB sites.
Thank you for clarifying anyway, Donny.
- Dave Mudgett
- Moderator
- Posts: 9648
- Joined: 16 Jul 2004 12:01 am
- Location: Central Pennsylvania and Gallatin, Tennessee
OK, I'm gonna avoid the obvious flame bait here.
To the original poster's question:
Hey - if you wanna tune to an equal temperament, great. I tune Spanish guitars that way (mostly). But pedal steel is a different animal, IMO. I find the beats produced by long-sustained purely equally-tempered intervals too much. Pianos are a totally different world. Again, IMO.
To the original poster's question:
Yes. And of course, wrt is generally an abbreviation for "with respect to".I guess that sweetened tuning offsets are specified wrt equal temperament?
Yup, if you sweeten some intervals and don't have any way to add compensation to sweeten up other string/pedal/lever combinations, then some of those other combinations will sound out. But the pedal steel is kind of unusual in that it is, in principle, possible to add mechanical compensators to bring those different combinations back into tune.I tried the Newman tuning and preferred it to unsweetened in many chords but found a few nasty dissonances (as I perceived them)
Hey - if you wanna tune to an equal temperament, great. I tune Spanish guitars that way (mostly). But pedal steel is a different animal, IMO. I find the beats produced by long-sustained purely equally-tempered intervals too much. Pianos are a totally different world. Again, IMO.
Sweetened tunings
Friends, have it your own ways: I've never stopped to ask who was using what tuning method. Good playing is good playing. All of this for audiences that largely can't tell what neck you are on? Hair splitting for the sake of hair splitting. My 2 cents.....
Emmons LeGrande D-10
GFI Ultra D-10 keyless
Quilter SteelAire
GFI Ultra D-10 keyless
Quilter SteelAire
-
- Posts: 25
- Joined: 23 Jan 2019 9:33 am
- Location: United Kingdom
Re: Sweetened tunings
Sure, Gary, I had no interest myself until certain specific chords started really ticking me off, not with any regard to what anyone else might think but just because I didn’t like the dissonance. The problem came first, only after a long while of frustration did I turn to sweetened tuning to fix it. Now I have found a compromise tuning I like I’ll likely not give it another thought: problem solved.GaryL wrote:Friends, have it your own ways: I've never stopped to ask who was using what tuning method. Good playing is good playing. All of this for audiences that largely can't tell what neck you are on? Hair splitting for the sake of hair splitting. My 2 cents.....
Absolutely. The pain inflicted by the piano subsides fairly quickly, but if you're going to screw the maximum sustain out of a chord, it needs to have a sonority worth fighting for.Dave Mudgett wrote:I find the beats produced by long-sustained purely equally-tempered intervals too much. Pianos are a totally different world.
In my other job as a trombone player I am used to beatless chords, which is why I favour JI on the steel.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
I tune my F# strings straight up, same as my E and B strings. I like the sound of the 2nd degree in E, and the 6th degree in A, when tuned this way. At 441.
Since Str 7 drops 7-8 cents in the BC F#mi chord(on all steels), I tune my C pedal in that combination, the F# and C# beatless to match, usually -7.
The F#min is such a ubiquitous chord in traditional pedal steel. Most players prefer to have the minor chord with the minor 3rd higher than the roots. That’s why they de tune the F# strings. They like the A note higher in relation to F#.
I used to tune like that. I never liked the C pedal being so flat in E or A.
It was just a matter of priorities for me. I like E and A being in tune more than I like the harmonious JI minor chord.
Maybe if I had tuning compensators I would use them to get a more harmonious F#minor or F#mi7 chord.
Till then, I like this, and it sounds much better with well tuned ET tracks.
John
Since Str 7 drops 7-8 cents in the BC F#mi chord(on all steels), I tune my C pedal in that combination, the F# and C# beatless to match, usually -7.
The F#min is such a ubiquitous chord in traditional pedal steel. Most players prefer to have the minor chord with the minor 3rd higher than the roots. That’s why they de tune the F# strings. They like the A note higher in relation to F#.
I used to tune like that. I never liked the C pedal being so flat in E or A.
It was just a matter of priorities for me. I like E and A being in tune more than I like the harmonious JI minor chord.
Maybe if I had tuning compensators I would use them to get a more harmonious F#minor or F#mi7 chord.
Till then, I like this, and it sounds much better with well tuned ET tracks.
John
Last edited by John Goux on 2 Aug 2020 4:37 pm, edited 1 time in total.
- Andrew Frost
- Posts: 497
- Joined: 12 Feb 2014 9:46 am
- Location: Toronto, Ontario
-
- Posts: 122
- Joined: 7 Jan 2010 11:52 am
- Location: Bladenboro, NC
If your guitar is capable, I highly recommend adding string one and seven micro-lowers to pedals A and B (Emmons setup). I tune my open F# to my open B. I tune my string 1 and 7 lowering comps as thirds to my string 9 with AB pedals engaged one at a time, to tune both micro lowers individually.I tune my C pedal string 4 whole tone raise with BC engaged to match the string 1 and 7 micro lower. I then tune the c pedal 5th string whole tone raise with bc engaged so the two minor chord is in tune. This gives you two F# notes and more harmonious chord positions i.e. chords with their root on string 9. There is also a need for two F notes. My E to F lever is tuned doubly sweetened to be used with A pedal- which is already sweetened once. The E to F change ends up flat when used alone for diminished 7th or 13b9 chords. An extra lever that lowers strings 1 2 and 7 tuned to be in tune with the diminished chord found on string 10 9 7 6, 9 7 6 5, 7652, 6521, 5321. That lever could also be split with the lever that raises strings 127 for an effective string 1 and 2 half tone raise. You can also get and in tune diminished chord an an all pull guitar capable of splits. The string 10 and 5 half tone lower lever combined with AB pedals and the E lower will land you a sweet sounding diminished chord as well. An all pull with splits and tuning compensators does not have to make compromises in the Just System.
I'd rather be pickin'
My setup is simpler. If I depress either the A or the C pedal, the 7th string lowers slightly.
This gives a perfect fourth or fifth with string 5.
I specified this on both my Williams and my Excel, but it should be easy to add on any guitar.
This gives a perfect fourth or fifth with string 5.
I specified this on both my Williams and my Excel, but it should be easy to add on any guitar.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
No, not tuning at 2 cents, that just meant my opinion.Ian Rae wrote:I took wrt to mean with respect to
Is that how much you back off that G string?Pat Moore wrote:My 2 cents
The thing that's missed is using your EARS, and not just a tuner on that G#. Reckon we all need to keep our ears tuned in as well as looking at a tuner all the time. Really helps in all aspects of tuning. The early days guys that I worked with, used a tuning fork, then tuned up the rest using harmonics by ear.
But nothing is written in stone. Use what you need to get on with playing!🎼🎶ðŸ‘
Just my 2 centsðŸ˜
Thx, Pat
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
If there's a chord that doesn't sound right, I usually choose to play something else, maybe just one or two notes of that chord. Or, maybe a just different chord. Musicians (especially steelers) do this all the time, they play alternatives and often simplify things to make them sound better.
As to the "beats" of tempered tunings, some choose to accept them, and others prefer to play those beautiful, pure, "dead-on" intervals and chords. Our western music-adapted ears actually prefer and gravitate towards the pure intervals, and the instruments that can accomplish them. Given the choice, who would play "out" on purpose?
"Close" is fine for some, but I personally strive for fewer (or sparser) chords that are dead-on.
As to the "beats" of tempered tunings, some choose to accept them, and others prefer to play those beautiful, pure, "dead-on" intervals and chords. Our western music-adapted ears actually prefer and gravitate towards the pure intervals, and the instruments that can accomplish them. Given the choice, who would play "out" on purpose?
"Close" is fine for some, but I personally strive for fewer (or sparser) chords that are dead-on.