Hiss from preamp
Moderator: Shoshanah Marohn
-
- Posts: 57
- Joined: 19 Nov 2017 10:28 am
- Location: Georgia, USA
Hiss from preamp
What can cause annoying hiss and noise from preamp
- Fred Treece
- Posts: 3920
- Joined: 29 Dec 2015 3:15 pm
- Location: California, USA
It would help to know what make and model preamp, tube or solid state or hybrid, and if you checked without an instrument plugged in.
Best I can do is take a guess.
The noise could be from having a gain setting too high, or an otherwise unbalanced gain stage-to-power stage situation. It could be from bad or wrong type of cabling, cheap worn out parts on the circuit board or a loose solder joint. In short, it’s a PITA that involves a process of elimination, unless you have a real pro in the room who can tell you in an instant that he knows what is causing that particular sound.
Best I can do is take a guess.
The noise could be from having a gain setting too high, or an otherwise unbalanced gain stage-to-power stage situation. It could be from bad or wrong type of cabling, cheap worn out parts on the circuit board or a loose solder joint. In short, it’s a PITA that involves a process of elimination, unless you have a real pro in the room who can tell you in an instant that he knows what is causing that particular sound.
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
"Hiss" can be caused by a bad tube, or a bad IC. If the circuit has discrete solid state components, it can also be a bad (leaky) transistor. It can also be exacerbated by poor circuit design, so it's important to know if the hiss has been there all along, or it's something new. As far as "noise", that's a pretty vague term, so you'll have to be more specific as to what kind of noise it is you're hearing.
- Brandon Mills
- Posts: 145
- Joined: 28 May 2012 2:51 pm
- Location: Victoria, TX. USA
- Bob Hoffnar
- Posts: 9244
- Joined: 4 Aug 1998 11:00 pm
- Location: Austin, Tx
- Contact:
Hiss is present on some level even with the most high end tube pre amps you can buy. I’m not sure of the technical causes but it seems to be an essential part of all great sounding tube amps. Some have more and some have less. There seems to be a balance between hiss and sonic richness that is dialed in by the builder. Solid state and digital amps don’t have the same issue but they sound like solid state and digital amps...
Bob
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
The hiss you usually hear in a tube amp is actually the sound of electrons hitting the plates of the tubes! It's exacerbated by high gains, high voltages, and emphasis on high frequencies. But, some of the better tube gear can be almost dead-quiet. The negative feedback circuit used in many amps helps to reduce hiss and gain. Take the feedback resistor out of a Twin Reverb, and you'll get hiss galore, along with treble like you've never heard.Bob Hoffnar wrote:Hiss is present on some level even with the most high end tube pre amps you can buy. I’m not sure of the technical causes but it seems to be an essential part of all great sounding tube amps.
- Godfrey Arthur
- Posts: 2997
- Joined: 12 Dec 2012 5:46 pm
- Location: 3rd Rock
Is it a modern preamp or something decades old and the hiss always there and you just noticed it from using digital quiet devices?
I have a Korg A3 great sounding patches from back in the 80's but by today's standards, the hiss on the output is unbearable and can't be masked rendering it useless for modern recording and some live gig work.
I have a Korg A3 great sounding patches from back in the 80's but by today's standards, the hiss on the output is unbearable and can't be masked rendering it useless for modern recording and some live gig work.
ShoBud The Pro 1
YES it's my REAL NAME!
Ezekiel 33:7
YES it's my REAL NAME!
Ezekiel 33:7