Getting lazy
Moderator: Shoshanah Marohn
-
- Posts: 446
- Joined: 4 Feb 2008 12:49 pm
- Location: Texas, USA
Getting lazy
So played a Sunday afternoon gig, and the sound guy had me really hot in my monitor mix. I noticed two things. 1. I’m getting lazy and resting my hand on the bass strings hence muting them prematurely. 2. I’m not using the volume pedal correctly. Basically not swelling into notes and hearing a lot of pick attack.
Things to work on!
Mack
Things to work on!
Mack
76 Emmons Push Pull, Williams 600, ShoBud Pro I, MSA Classic, Remington SteelMaster dbl 8, MSA Super Slide dbl 8, Gold Tone 6, And other instruments and equipment I can't afford.
- Jacek Jakubek
- Posts: 336
- Joined: 10 Mar 2007 7:53 am
- Location: Mississauga, Ontario, Canada
-
- Posts: 2175
- Joined: 20 Feb 2007 4:10 pm
- Location: Indiana, USA
On a lark, I spent a whole year, gigs and everything without a volume pedal. I had to pick in differing places for certain tones or volume and had to really watch the pick attack for volume adjustment. It was really odd at first. It was hard to be subtle. I had to use very soft, rolling vibrato for sustain.
I use a VP, but I prefer the tone of not having one. I have had the bad luck of my pedal dying while setting up for a gig. No biggie! I just played without.
It's hard to use a VP in a way that is transparent, that is, so it doesn't sound like volume swells or chopping off the front of a note. But, those can sound right too!
I use a VP, but I prefer the tone of not having one. I have had the bad luck of my pedal dying while setting up for a gig. No biggie! I just played without.
It's hard to use a VP in a way that is transparent, that is, so it doesn't sound like volume swells or chopping off the front of a note. But, those can sound right too!
RICK ABBOTT
Sho~Bud D-10 Professional #7962
Remington T-8, Wakarusa 5e3 clone
1953 Stromberg-Carlson AU-35
Sho~Bud D-10 Professional #7962
Remington T-8, Wakarusa 5e3 clone
1953 Stromberg-Carlson AU-35
- Bill Terry
- Posts: 2786
- Joined: 29 Apr 1999 12:01 am
- Location: Bastrop, TX
Absolutely, listen to any of the masters. When it's the right place, they use the volume pedal to build the 'envelope' around the note. I think being able to do that is integral to developing what most folks call 'touch'.. My 0.02.It's hard to use a VP in a way that is transparent, that is, so it doesn't sound like volume swells or chopping off the front of a note. But, those can sound right too!
- Fred Treece
- Posts: 3920
- Joined: 29 Dec 2015 3:15 pm
- Location: California, USA
Having a bad mix is as bad as having bad tone. It’s frustrating, constricts your style, and you focus on technique, like a practice session, instead of performing and playing music with the band and for your audience. Maybe the bigger lesson from your experience is to get more control over your stage sound. Or get a new sound guy...
-
- Posts: 446
- Joined: 4 Feb 2008 12:49 pm
- Location: Texas, USA
It was a house PA with the house running the sound. I asked him to turn the steel down in the mix for the second set which they did. The point of the original post was that the mix was loud enough for me to identify some mistakes in my playing. Normally I’m buried in the mix, so this was unique in that I could hear my mistakes. I got nothing but good comments from out front, but that mix is different than a monitor mix.
Regarding the volume pedal I like to back off and swell into the note after I pick it. I found myself being lazy with that approach. Seems I read that was a good approach from one of the big dogs here on the forum.
Thanks for everyone’s response!
Mack
Regarding the volume pedal I like to back off and swell into the note after I pick it. I found myself being lazy with that approach. Seems I read that was a good approach from one of the big dogs here on the forum.
Thanks for everyone’s response!
Mack
76 Emmons Push Pull, Williams 600, ShoBud Pro I, MSA Classic, Remington SteelMaster dbl 8, MSA Super Slide dbl 8, Gold Tone 6, And other instruments and equipment I can't afford.
-
- Posts: 2175
- Joined: 20 Feb 2007 4:10 pm
- Location: Indiana, USA
That is the technique. I have kind of set my normal position for my foot at the "3" on a scale of 1-10 and use the pedal to hold that volume by moving towards "10" as I need sustain. Basically, the actual volume stays in the 3-5 range unless I'm taking a ride, where I run from 5-10. I only have it off when I'm not playing...like off the bandstand, or realize I'm not able to play in a civilized manner and kill it for the sake of my pride.Mack Quinney wrote:
Regarding the volume pedal I like to back off and swell into the note after I pick it. I found myself being lazy with that approach. Seems I read that was a good approach from one of the big dogs here on the forum.
Mack
RICK ABBOTT
Sho~Bud D-10 Professional #7962
Remington T-8, Wakarusa 5e3 clone
1953 Stromberg-Carlson AU-35
Sho~Bud D-10 Professional #7962
Remington T-8, Wakarusa 5e3 clone
1953 Stromberg-Carlson AU-35
- Jack Stoner
- Posts: 22087
- Joined: 3 Dec 1999 1:01 am
- Location: Kansas City, MO
About 20 years ago I did steel on a CD project for a local singer. It was old school recording, all the musicians were in the same room and low volume and recorded with an 8 track tape recorder. I set the steel volume with my Goodrich VP and never touched it through the 6 songs we laid down the first day. Same with the 4 songs the next day. There is a mix of slow ballads and fast songs and even one that I used my MatchBro on (and fooled some Bluegrass pickers). Can't tell that I wasn't using the volume pedal on any of the songs.
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings (all for sale as package)
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
-
- Posts: 1813
- Joined: 22 Jun 1999 12:01 am
- Location: St Charles, IL
I try to use the volume pedal more as a way of making the notes/chords "blossom" as I play them. I like hearinging the pick attack (generally, with exceptions), but that attack is only at full volume if I'm playing a solo or interlude that has me coming to the front.
You'll figure out the best way to use that pedal by listening to yourself (and others). Some players like to swell more, some like that snappy picking, some like all of the above, right? You'll find out as you evolve as a player.
You'll figure out the best way to use that pedal by listening to yourself (and others). Some players like to swell more, some like that snappy picking, some like all of the above, right? You'll find out as you evolve as a player.
-
- Posts: 171
- Joined: 11 Mar 2005 1:01 am
- Location: Boise, ID
I prefer the term expression pedal. It's a small semantic difference, but describes the musical function more accurately. In my mind the term volume control (pedal or knob) implies level control. Thinking in terms of expression reminds us to use the pedal to add an extra layer of emotion to our playing. I'm going to wax a bit philosophical and say if that's not how you view it, you might be better off not using a pedal at all. There are many ways I've heard to use an expression pedal to create emotion, one technique does not fit all, but ALL of the great players that use a pedal use it to enhance the feel and/or impact of their musical statements.
Kudos for Expression Pedal terminology Reece Anderson and, if I remember correctly, Paul Franklin and Jay Dee Maness too.
Kudos for Expression Pedal terminology Reece Anderson and, if I remember correctly, Paul Franklin and Jay Dee Maness too.