Effect Pedal Holder (Clamp??) for Legs?

Jim Fogarty · Post by **Jim Fogarty** » 27 Dec 2019 5:12 pm

I'm sure this has been asked many, many times......but trying to search for something about "pedals" on a Pedal Steel forum is tough!!

So......where can you get those holders that attach effects pedals to the steel legs?? I assume it's a clamp and velcro......or?

Thanks for any guidance!

- Jim

Joseph Carlson · Post by **Joseph Carlson** » 27 Dec 2019 6:14 pm

I attached one of these to an A/B pedal and it works great
https://www.steelguitarshopper.com/show ... lamp-long/

Blake Surrell · Post by **Blake Surrell** » 27 Dec 2019 6:29 pm

Hi, I just use a delay pedal and a tuner so I bought this shelf off Ebay. It's actually a microphone stand shelf. Works great...

https://www.ebay.com/itm/Gravity-Stands ... 2749.l2649

Jim Fogarty · Post by **Jim Fogarty** » 27 Dec 2019 6:32 pm

Joseph Carlson wrote:I attached one of these to an A/B pedal and it works great
https://www.steelguitarshopper.com/show ... lamp-long/

Thanks. Just stick velcro to it?

Joseph Carlson · Post by **Joseph Carlson** » 27 Dec 2019 6:38 pm

I drilled holes in the pedal and used two small bolts to attach the holder to the pedal.

Daniel Morris · Post by **Daniel Morris** » 27 Dec 2019 6:52 pm

PM sent, Jim.

This may be what you mean: https://qwikstix.com/store/Steel-Pedal- ... -c39627590

Johnie King · Post by **Johnie King** » 28 Dec 2019 8:22 am

Daniel has found the nicest clamp ons Iâ€™ve seen.

Check these folks out.

Daniel Morris · Post by **Daniel Morris** » 28 Dec 2019 9:06 am

I have used both the small and large trays (and may be selling them; OP has first dibs). They work very nicely (with Velcro) for a tuner, small pedal(s), etc.
Steel Guitars of Nashville shows they carry these as well.

Larry Allen · Post by **Larry Allen** » 6 Jan 2020 3:25 pm

This is the Qwik Stix I use, very compact..

Roy Peterman · Post by **Roy Peterman** » 7 Jan 2020 8:59 am

Jim, I think what you need is the leg clamp by Show-Pro which Bob carries here on the Forum. It's in the accessories section of the Forum. I used one of these to fasten a HOF reverb pedal to my steel. I drilled a couple of holes in the cover of the pedal, and tapped the two holes. It works great. I see Joe Carlson has the correct link, above.

Clyde Mattocks · Post by **Clyde Mattocks** » 7 Jan 2020 3:05 pm

I keep one of those 3.00 Lowes plastic 5 gal. buckets in my vehicle. It is an excellent light weight amp stand, handy to turn upside down and put junk or effects pedal beside you or simply to haul various small items in and out of the venue.

Bobby D. Jones · Post by **Bobby D. Jones** » 7 Jan 2020 3:56 pm

Be careful of what clamp you use on Chrome plated aluminum legs. Some of those clamps are rough on the aluminum legs. I have a GFI ULTRA that one of the back legs looks like a dog chewed it, Where the previous owner had attached and removed a tuner from the leg many times. It is so bad I am considering replacing the leg.

David Ball · Post by **David Ball** » 7 Jan 2020 4:49 pm

These work pretty well and don't seem to damage the legs: https://www.amazon.com/FOTYRIG-Camera-T ... 55&sr=8-17

Dave

The Steel Guitar Forum

Effect Pedal Holder (Clamp??) for Legs?

Effect Pedal Holder (Clamp??) for Legs?

Effect pedal holder