The Steel Guitar Forum Store 

Post new topic Recommendation for pick up rewinding.
Reply to topic
Author Topic:  Recommendation for pick up rewinding.
Len Amaral

 

From:
Rehoboth,MA 02769
Post  Posted 7 Dec 2019 5:02 pm    
Reply with quote

Any recommend someone that rewinds pickups? I have some narrow field PRS pickups that sound harsh.
_________________
I survived the sixties!
View user's profile Send private message Send e-mail

Paul Wade


From:
mundelein,ill
Post  Posted 8 Dec 2019 6:33 am     pickups rewine
Reply with quote

jerry wallace great guy does a superb job

http://www.jerrywallacemusic.com/

p.w
View user's profile Send private message Send e-mail

Dan Beller-McKenna


From:
Durham, New Hampshire, USA
Post  Posted 8 Dec 2019 8:05 am    
Reply with quote

Tom Brantly did a great job for me on a dead Dekley pickup.

www.rewindpickup.com
View user's profile Send private message Send e-mail Visit poster's website

ajm

 

From:
Los Angeles
Post  Posted 8 Dec 2019 9:44 am    
Reply with quote

1 - Are these GUITAR pickups, or STEEL GUITAR pickups?

2 - Have you contacted PRS?
They might not be repairable, and/or they might not be worth it and better to buy new ones.
View user's profile Send private message

Len Amaral

 

From:
Rehoboth,MA 02769
Post  Posted 8 Dec 2019 10:20 am    
Reply with quote

They are guitar pickups and not a traditional shape so there is no drop in replacement. The pickups are loud and sound harsh. My only option is to have them rewound with less output.

Thanks,

Lenny
_________________
I survived the sixties!
View user's profile Send private message Send e-mail

Jack Hanson


From:
San Luis Valley, USA
Post  Posted 8 Dec 2019 1:08 pm    
Reply with quote

Have you tried adjusting the pickups farther away from the strings? Or simply turning the amp up and backing off the control(s) on the guitar? A different value on the pot(s) and/or the tone capacitor may also make a difference.
View user's profile Send private message Send e-mail

Georg Sørtun


From:
Mandal, Agder, Norway
Post  Posted 8 Dec 2019 2:07 pm    
Reply with quote

Len Amaral wrote:
The pickups are loud and sound harsh. My only option is to have them rewound with less output.
May be many good reasons for rewinding PUs, but "loud" and "harsh" rarely ever are one of them. Why not try to attenuate them for a lower output first, before modifying them?
If they sound better through a VP at half volume or less, then two resistors as a fixed attenuator at the PU will do since it often is an overdriven amp input stage that causes harshness.
View user's profile Send private message Send e-mail Visit poster's website

Len Amaral

 

From:
Rehoboth,MA 02769
Post  Posted 8 Dec 2019 4:23 pm    
Reply with quote

Hi Georg, the pickups are a different animal and I’m not the only owner of a guitar with these narrow-field pickups that is questioning and complaining about the sound. I tried lowering the pickups and that eases the volume a bit but the overall tone is muddy and not pleasing. I emailed several pickup companies mentioned and waiting for a reply.

Thanks to all that responded👍
_________________
I survived the sixties!
View user's profile Send private message Send e-mail

Michael Brebes

 

From:
Northridge CA
Post  Posted 8 Dec 2019 4:39 pm    
Reply with quote

"Muddy" is a lot different than "harsh". If they are too loud and muddy, then removing some of the windings might be a real alternative. Have you measured the DC resistance of the pickup in question?

I do pickup repairs and rewinds and have done some for forum members.
_________________
Michael Brebes
Instrument/amp/ pickup repair
MSA D10 Classic/Rickenbacher B6/
Dickerson MOTS/Dobro D32 Hawaiian/
Goldtone Paul Beard Reso

Mesa Boogie Studio Pre/Hafler 3000
RP1/MPX100
View user's profile Send private message Send e-mail

Carl Mesrobian


From:
Salem, Massachusetts, USA
Post  Posted 10 Dec 2019 10:47 am    
Reply with quote

I think Len meant that when attenuated, they sound muddy instead of harsh??

Len - do you have an optical pedal?
_________________
--carl

"The better it gets, the fewer of us know it." Ray Brown
View user's profile Send private message Send e-mail

Len Amaral

 

From:
Rehoboth,MA 02769
Post  Posted 10 Dec 2019 4:41 pm    
Reply with quote

Update, I contacted Tom Brantley that Dan mentioned to rewind the pickup. He said that the Narrow-field pickup has 2 coils and he suggested winding one coil standard and the other coil wound to a much lesser degree and that should put the pickup somewhat near P-90..

Carl, you are correct, I should have said “muddy” rather than harsh. The output on these pickups is very strong and it hits the input of the amp. I can understand as rock player wanting that vibe but I’m looking for a sweeter tone. It’s a beautiful guitar and I want to keep it so I’m going for the rewind.


_________________
I survived the sixties!
View user's profile Send private message Send e-mail

J Fletcher

 

From:
London,Ont,Canada
Post  Posted 12 Dec 2019 11:23 am    
Reply with quote

Can the two coils be split ? My PRS MacArty has the ability to split the coils of each pickup. Can get a lower output and clearer tone. More strat like.
View user's profile Send private message Send e-mail


All times are GMT - 8 Hours
Jump to:  

Our Online Catalog
Strings, CDs, instruction,
steel guitars & accessories

www.SteelGuitarShopper.com

Please review our Forum Rules and Policies

Steel Guitar Forum LLC
PO Box 237
Mount Horeb, WI 53572 USA


Click Here to Send a Donation

Email admin@steelguitarforum.com for technical support.


BIAB Styles
Ray Price Shuffles for
Band-in-a-Box

by Jim Baron
HTTP