Keeping Finger Picks on?
Moderator: Shoshanah Marohn
- Buck Grantham
- Posts: 3155
- Joined: 30 Sep 1999 12:01 am
- Location: Denham Springs, LA. USA
- Mark Lind-Hanson
- Posts: 430
- Joined: 21 Dec 2004 1:01 am
- Location: Menlo Park, California, USA
- Stu Schulman
- Posts: 6526
- Joined: 15 Oct 1998 12:01 am
- Location: Ulster Park New Yawk (deceased)
- Tony Davis
- Posts: 5127
- Joined: 6 Feb 1999 1:01 am
- Location: Brisbane, QLD, Australia
I always had trouble losing picks as it gets a little hot and humid here...until my Buddy brought me a set of Kyser picks back from USA....no trouble now.....they have a sort of ripple or cheese grater finish in the inside of the pick bit...stops them from slipping...I bought a few more from Scotty last year. My friend Doug Rolfe has the Kyser pick for sale but has added a sort of rubber tube to the bands that go around the finger for extra grip...this could be achieved by going to electrical store and buying Shrink tube....just big enough to slip over band and then it shrinks when heat is applied....used to cover and insulate electrical joints!.....think I have some in my shed...might try it tomorrow
-
- Posts: 23
- Joined: 9 Dec 2002 1:01 am
- Location: Kenosha, Wisconsin, USA
- Jack Stoner
- Posts: 22087
- Joined: 3 Dec 1999 1:01 am
- Location: Kansas City, MO
- Mike Perlowin
- Posts: 15171
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA
- Contact:
I use the red powder coated picks that are made by the same guiy that makes the red rajah bars. The powder coating prevents them from slipping off. I've not noticed any difference in the tone they produce.
Plus, they're red. <font size="1" color="#8e236b"><p align="center">[This message was edited by Mike Perlowin on 27 July 2005 at 07:34 AM.]</p></FONT>
Plus, they're red. <font size="1" color="#8e236b"><p align="center">[This message was edited by Mike Perlowin on 27 July 2005 at 07:34 AM.]</p></FONT>
-
- Posts: 413
- Joined: 23 Aug 2001 12:01 am
- Location: Loraine, Texas
As weird as it may look to anyone watching you, sticking fingers in mouth has worked best for me for years, even better than resin, in fact the picks are hard to pull off when you are through playing, it's fast and cheap and always available unless you have a severe case of the drymouth, then you better look around for the fiddlers resin!!!
Buck, I always did what you do to keep them on and it worked for me.When I saw you do it in the green room at the Baldknobbers show then I knew I must be on to something.RS
------------------
Franklin Guitars
<font size="1" color="#8e236b"><p align="center">[This message was edited by Ron Scott on 27 July 2005 at 09:58 AM.]</p></FONT>
------------------
Franklin Guitars
<font size="1" color="#8e236b"><p align="center">[This message was edited by Ron Scott on 27 July 2005 at 09:58 AM.]</p></FONT>
- Tim Whitlock
- Posts: 1768
- Joined: 3 Jan 2001 1:01 am
- Location: Colorado, USA
-
- Posts: 6870
- Joined: 27 Nov 2000 1:01 am
- Location: Oklahoma City, OK USA, (deceased)
- Contact:
I have tried all of the solutions to securing finger picks mentioned above, but this is the BEST one that has worked for me!
<img width=580 src=http://genejones.bizland.com/Harley%20001.jpg>
<font size="1" color="#8e236b"><p align="center">[This message was edited by Gene Jones on 27 July 2005 at 03:15 PM.]</p></FONT>
<img width=580 src=http://genejones.bizland.com/Harley%20001.jpg>
<font size="1" color="#8e236b"><p align="center">[This message was edited by Gene Jones on 27 July 2005 at 03:15 PM.]</p></FONT>
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
My solution was to use Stevens picks. They're now produced by John Pearse, in stainless only. They have a double loop that fits over the knuckle instead of your fingernail, so they'll <u>never</u> slip off. A side benefit is that if you have trouble with hangnails or have a smashed fingernail, these picks completely avoid the nail area, so you can still play!
-
- Posts: 951
- Joined: 18 Nov 1998 1:01 am
- Location: stowe, vermont
-
- Posts: 239
- Joined: 22 Jun 2005 12:01 am
- Location: Battle Creek, Michigan, USA
Ok you guys...I'm not a peddler....but I always read this section of the forum just in case I can pick up some kind of pointer to help me out with my Lap Steel...so here we go...I've played and picked autoharp for years...and the VERY best thing to hold all your picks on with is SILCONE CAULK, yep, the rubbery, flexible stuff you put around your bathtub or sink. It has to be the kind that stays flexible...coat the inside of your picks it eliminates two problems we all have while wearing picks. First, it "cushions" your fingers, so the picks don't bite you, and second, it acts like a non-skid rug mat on your fingers, the picks won't fall off. You have to try this, I know it sounds weird, but I wear four picks all the time, and this works. I never lose a pick. And it never wears off!
Edited to add: it also won't "powder" onto your strings or board, so you won't have to clean them like you do with rosin...
It ranks right up there with duct tape in my house.........
Joy<font size="1" color="#8e236b"><p align="center">[This message was edited by Joy Wofford on 28 July 2005 at 10:35 PM.]</p></FONT>
Edited to add: it also won't "powder" onto your strings or board, so you won't have to clean them like you do with rosin...
It ranks right up there with duct tape in my house.........
Joy<font size="1" color="#8e236b"><p align="center">[This message was edited by Joy Wofford on 28 July 2005 at 10:35 PM.]</p></FONT>
- Kenny Davis
- Posts: 1370
- Joined: 10 Apr 1999 12:01 am
- Location: Great State of Oklahoma
Well, I have to admit that everytime this subject comes around, I usually just smirk, and chuckle at some of the remedies. After getting to a level of playing "out" or professionally, I have never had a problem with losing a finger pick. Then came last night...Right in the middle of Panhandle Rag, I blew the index finger pick. It stayed on, but not in a playable position. I have laid the blame on two things:
1. Resonator Guitar
2. Pro Piks single wraps
By nature, you play a resonator harder than a pedal steel, plus the Pro Piks are "softer" than the old Nationals I've always used. With that said, coupled with my "novice" status on the reso - Must have led to the mishap.
Therefore, since it didn't come completely off, and it was during a jam session - I consider the incident a "non event", and I will continue to boast that I've never blown a finger pick!
1. Resonator Guitar
2. Pro Piks single wraps
By nature, you play a resonator harder than a pedal steel, plus the Pro Piks are "softer" than the old Nationals I've always used. With that said, coupled with my "novice" status on the reso - Must have led to the mishap.
Therefore, since it didn't come completely off, and it was during a jam session - I consider the incident a "non event", and I will continue to boast that I've never blown a finger pick!
-
- Posts: 413
- Joined: 23 Aug 2001 12:01 am
- Location: Loraine, Texas
- Tony Davis
- Posts: 5127
- Joined: 6 Feb 1999 1:01 am
- Location: Brisbane, QLD, Australia
OK...I found my Shrink Tube in my shed....slips over the bands of the picks real nice....hold a cigarette lighter under it and it shrinks to fit the band real tight......I have never felt so comfortable with finger picks after 30 odd years..they grip but feel so comfortable.
Its called shrink tube...prob cant get it at Tandy or Radio Shack but any electrical outlet where they sell plugs ..sockets ..wire etc should have it
I really works
Tony
Its called shrink tube...prob cant get it at Tandy or Radio Shack but any electrical outlet where they sell plugs ..sockets ..wire etc should have it
I really works
Tony
- Gregg Thacker
- Posts: 346
- Joined: 13 Sep 2004 12:01 am
- Location: Pasadena, Texas, USA
- Contact:
I have some finger picks that have the foam nose pads on them. I also have the single band propicks. When I use the propicks, I lick my finger tips before putting on the picks and they stay on pretty darn well. The picks that hace the foam rubber on them seem to be more confortable. Also one key issue is not to have them tooo tight where they cut off the circulation in your fingers.
Gregg
------------------
If it don't have a Steel, it ain't real!
Gregg
------------------
If it don't have a Steel, it ain't real!
-
- Posts: 360
- Joined: 24 Aug 2000 12:01 am
- Location: Piedmont, Alabama USA
Just a dab of Gorilla Snot before starting to play will allow you to loosen up on the finger bands and your picks will stay on too. It smells like it is basically a rosin paste. As said earlier, fiddle rosin, or even going to the pine thicket and harvesting a little raw rosin would work if you can't readily find the little jars of Gorilla Snot.
------------------
EMCI Double 10 Guitar, Nashville 400, Session 400, and Evans FET 500 HiVolt, and Gretsch Nashville Pro Steel Amp, Keith Hilton Digital Sustain pedal and Seymour Duncan KTG -1, Hughes&Kettner BATT
Harold Parris email hparris9@aol.com
------------------
EMCI Double 10 Guitar, Nashville 400, Session 400, and Evans FET 500 HiVolt, and Gretsch Nashville Pro Steel Amp, Keith Hilton Digital Sustain pedal and Seymour Duncan KTG -1, Hughes&Kettner BATT
Harold Parris email hparris9@aol.com
-
- Posts: 44
- Joined: 13 Jan 2005 1:01 am
- Location: Lufkin, Texas, USA
- Owen F. Clark
- Posts: 14
- Joined: 2 Aug 2005 12:01 am
- Location: Maine, USA
I'm a 71 year old kid that just started playing steel about 21/2 years ago.I ran into the problem at the get-go. I had some of that stuff they call Liquid Bandage from the drug drug or grocerie store. I clean the inside good with alcohol and paint the them with two coats. It smell a little like medicine but it works for me. Usually will last for several gigs.
-
- Posts: 239
- Joined: 22 Jun 2005 12:01 am
- Location: Battle Creek, Michigan, USA
I'm adding onto this post at this late date because I've tried out an idea that was listed here by member Tony Davis...and it works great!
Electrical wire shrink tubing put on over the "sleeves" of your picks is so easy to do. It's comfortable padding, easy to apply, and it keeps the picks from slipping. Just use a lighter, or as I did, a hairdryer, and presto, it's on. What more could you want?
And oh yes......it's CHEAP!
I got mine at a Menards store here, which is like a Lowes or Home Depot place. You really gotta try this if you're having trouble with picks slipping or if they are biting into you.
Thanks Tony, I'm a convert!
Joy
Electrical wire shrink tubing put on over the "sleeves" of your picks is so easy to do. It's comfortable padding, easy to apply, and it keeps the picks from slipping. Just use a lighter, or as I did, a hairdryer, and presto, it's on. What more could you want?
And oh yes......it's CHEAP!
I got mine at a Menards store here, which is like a Lowes or Home Depot place. You really gotta try this if you're having trouble with picks slipping or if they are biting into you.
Thanks Tony, I'm a convert!
Joy