looking for ideas for a tone control
Moderator: Shoshanah Marohn
-
- Posts: 59
- Joined: 19 Jul 2017 8:05 am
- Location: Texas, USA
looking for ideas for a tone control
My Fender Dual 8 is just a hair too bright with my new amp (deluxe reverb with bright cap removed and treble all the way down!) I could roll off the tone control on the guitar, but I like using that for the 'boo-wah' sound. I know I could use an EQ pedal, but I am always trying to simplify things and lighten my load. Also, I don't want to alter the amp because it sounds great for other guitars as is. So, I'm looking for suggestions.
Could I potentially make a tone control integrated into a guitar cable? Or a very small, passive box? I could see this just having a small trim pot, or maybe even a fixed value that works for this guitar/amp combo. I have decent soldering skills, so if anyone has a good idea how to design it, I imagine I could put it together.
THANKS.
Could I potentially make a tone control integrated into a guitar cable? Or a very small, passive box? I could see this just having a small trim pot, or maybe even a fixed value that works for this guitar/amp combo. I have decent soldering skills, so if anyone has a good idea how to design it, I imagine I could put it together.
THANKS.
- Jerry Overstreet
- Posts: 12622
- Joined: 11 Jul 2000 12:01 am
- Location: Louisville Ky
-
- Posts: 535
- Joined: 13 Jul 2009 11:41 am
- Location: Billings, Montana, USA
Check the capacitor in the dual pro. If it's a paper type it's so dried out that it's more of a resistor. Others disagree but my personal philosophy is that, with the exception of mica types, any cap old enough to draw Social Security should be retired on general principles. Replace it with a .047mfd, the modern value for the old .05. If that doesn't help, experiment with changing the value to roll off more highs.
- Erv Niehaus
- Posts: 26797
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
-
- Posts: 42
- Joined: 31 Jul 2015 8:15 am
- Location: Albany, NY
-
- Posts: 59
- Joined: 19 Jul 2017 8:05 am
- Location: Texas, USA
Well, the goodrich unit could fit the bill, but I still wonder if there's a smaller DIY option. I'm picturing a box with a 1/4" plug coming out of it, almost like those old dan armstrong orange squeezers, and a 1/4" jack, then like Steve mentioned, just a tele tone control inside.
Oh, and I'll check the capacitor too.
Oh, and I'll check the capacitor too.
- Brooks Montgomery
- Posts: 1674
- Joined: 5 Feb 2016 1:40 pm
- Location: Idaho, USA
Is the Matchbox an improvement if you play thru a Black Box with the tone knob? Or is it somewhat redundant?Jerry Overstreet wrote:Search around here for the Goodrich Match Box that will snap on to your guitar leg. They've been around a long time and often you can pick up one of the early ones for a reasonable price. Just be sure it's one that has the tone control built in.
I use a passive (pot) Goodrich pedal.
A banjo, like a pet monkey, seems like a good idea at first.
- Jerry Overstreet
- Posts: 12622
- Joined: 11 Jul 2000 12:01 am
- Location: Louisville Ky
Yes, Brooks. If you are using a Black Box, the Match Box would be redundant and/or unnecessary as you suspected.
Will, if you're knowledgeable about building such things, you could pick up an enclosure like a Hammond 1590A "twinkie" size or a square #1590LB and use it to build a tone control with the proper components. www.tubesandmore.com has an assortment of boxes like these.
Will, if you're knowledgeable about building such things, you could pick up an enclosure like a Hammond 1590A "twinkie" size or a square #1590LB and use it to build a tone control with the proper components. www.tubesandmore.com has an assortment of boxes like these.
- Brooks Montgomery
- Posts: 1674
- Joined: 5 Feb 2016 1:40 pm
- Location: Idaho, USA
- Roman Sonnleitner
- Posts: 759
- Joined: 27 Nov 2005 1:01 am
- Location: Vienna, Austria
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
Yes, you could make an inline tone control, or just add a small value cap across the input. I don't know what kind of cables you're using, but you should NOT be using low-capacity cables (like George-Ls) if having too much treble is an issue. The problem you're experiencing can sometimes be eliminated just by using a longer or cheaper cable.
- Murray McDowall
- Posts: 101
- Joined: 22 Jun 2001 12:01 am
- Location: Warrnambool, Victoria, Australia
-
- Posts: 3730
- Joined: 1 May 1999 12:01 am
- Location: 248 Laurel Road Ozark, Missouri 65721
- Contact:
Most guitar tone controls are first order filters. The biggest problem with any kind of tone control filter is the impedance the tone control sees on the output. Low impedance and the tone control will not work correctly. There are many types of second order filters that work great, but they all need to see really high impedance. The drop off per decade is much greater as the order of the filter goes up. Even a 4th order filter is not that hard to build. Last year I got some great experience building filters for a violin manufacturer who was using different kinds of piezo pickups. It was a difficult job taming the highs. The arrangement had to be special because the piezo pickup had to see high impedance.
-
- Posts: 3730
- Joined: 1 May 1999 12:01 am
- Location: 248 Laurel Road Ozark, Missouri 65721
- Contact:
Most guitar tone controls are first order filters. The biggest problem with any kind of tone control filter is the impedance the tone control sees on the output. Low impedance and the tone control will not work correctly. There are many types of second order filters that work great, but they all need to see really high impedance. The drop off per decade is much greater as the order of the filter goes up. Even a 4th order filter is not that hard to build. Last year I got some great experience building filters for a violin manufacturer who was using different kinds of piezo pickups. It was a difficult job taming the highs. The arrangement had to be special because the piezo pickup had to see high impedance.
- Tony Prior
- Posts: 14522
- Joined: 17 Oct 2001 12:01 am
- Location: Charlotte NC
- Contact:
maybe your solution is right in front of your nose ?
Emmons L-II , Fender Telecasters, B-Benders
Pro Tools 8 and Pro Tools 12
jobless- but not homeless- now retired 8 years
CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website
Pro Tools 8 and Pro Tools 12
jobless- but not homeless- now retired 8 years
CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website
-
- Posts: 59
- Joined: 19 Jul 2017 8:05 am
- Location: Texas, USA
Thanks for the input, everyone. Roman, that product is exactly the kind of thing I was hoping existed. I may have to order one to try out, though I think I have solved the issue another way.
In looking through old posts about the Dual Pro, I found this thread in which the discussion gets to the fact that there were two ways the dual pros were wired up. It seems everyone considers the 'alternate hookup' (as listed here) to be superior. I moved the one wire to change mine to the alternate hookup and it is a great improvement. The guitar is still bright, but the tone knob is so much more useful now. I can do the boo-wah sound and still land the tone knob in pleasant territory. And as an added bonus, I can turn down the vol pot without things getting muddy. This alternate hookup should be standard!
In looking through old posts about the Dual Pro, I found this thread in which the discussion gets to the fact that there were two ways the dual pros were wired up. It seems everyone considers the 'alternate hookup' (as listed here) to be superior. I moved the one wire to change mine to the alternate hookup and it is a great improvement. The guitar is still bright, but the tone knob is so much more useful now. I can do the boo-wah sound and still land the tone knob in pleasant territory. And as an added bonus, I can turn down the vol pot without things getting muddy. This alternate hookup should be standard!
- Jerry Overstreet
- Posts: 12622
- Joined: 11 Jul 2000 12:01 am
- Location: Louisville Ky
- Cartwright Thompson
- Posts: 2647
- Joined: 31 Dec 1998 1:01 am
- Larry Behm
- Posts: 4400
- Joined: 4 Aug 1998 11:00 pm
- Location: Mt Angel, Or 97362
Do you have an amp designed for steel in addition to the deluxe designed for guitar?
Any graphic EQ pedal should do the job.
Any graphic EQ pedal should do the job.
'70 D10 Black fatback Emmons PP, Hilton VP, BJS bars, Boss GE-7 for Dobro effect, Zoom MS50G, Flamma Reverb, Planet Wave cables, Quilter 202 Toneblock, Telonics 15” speaker.
Phone: 971-219-8533
Phone: 971-219-8533
- Patrick Huey
- Posts: 738
- Joined: 7 Nov 2014 8:38 am
- Location: Nacogdoches, Texas, USA
Murray,Murray McDowall wrote:Hey Roman, what a great idea!!
I ordered one today.
Many thanks,
Murray.
How much was it? I didn’t see prices listed on the site
Pre RP Mullen D10 8/7, Zum 3/4, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/4, Fender Steel King, 2 Peavey Session 500's, Peavey Nashville 400, Boss DD-3, Profex-II, Hilton Digital Sustain, '88 Les Paul Custom,Epiphone MBIBG J-45, Fender Strat & Tele's, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!!
- Patrick Huey
- Posts: 738
- Joined: 7 Nov 2014 8:38 am
- Location: Nacogdoches, Texas, USA
Kieth my vote still goes for your original Hilton Digital Sustain box. It has both a gain AND tone control and I’ve preferred it over the Matchbox by far. I can tame the highs in my pre RP Mullen to perfection and to suit the needs of the song I’m attempting to butcher and not have to adjust the amp. Buffered circuitry for no signal loss as well. I wish you still made them w/ the tone control knob.Keith Hilton wrote:Most guitar tone controls are first order filters. The biggest problem with any kind of tone control filter is the impedance the tone control sees on the output. Low impedance and the tone control will not work correctly. There are many types of second order filters that work great, but they all need to see really high impedance. The drop off per decade is much greater as the order of the filter goes up. Even a 4th order filter is not that hard to build. Last year I got some great experience building filters for a violin manufacturer who was using different kinds of piezo pickups. It was a difficult job taming the highs. The arrangement had to be special because the piezo pickup had to see high impedance.
Pre RP Mullen D10 8/7, Zum 3/4, Carter S-10 3/4, previous Cougar SD-10 3/4 & GFI S-10 3/4, Fender Steel King, 2 Peavey Session 500's, Peavey Nashville 400, Boss DD-3, Profex-II, Hilton Digital Sustain, '88 Les Paul Custom,Epiphone MBIBG J-45, Fender Strat & Tele's, Takamine acoustics, Marshall amps, Boss effects, Ibanez Tube Screamer, and it all started with an old cranky worn out Kay acoustic you could slide a Mack truck between the strings and fretboard on!!
- Murray McDowall
- Posts: 101
- Joined: 22 Jun 2001 12:01 am
- Location: Warrnambool, Victoria, Australia
- Marc Jenkins
- Posts: 1627
- Joined: 11 Mar 2007 7:23 pm
- Location: Victoria, British Columbia, Canada
- Murray McDowall
- Posts: 101
- Joined: 22 Jun 2001 12:01 am
- Location: Warrnambool, Victoria, Australia
Yes Patrick, it has a fair bit of treble cut in advancing stages from the second of the four positions of the switch. The first position has no cut at all.
Give it a try, it sounds about right on the second pos with the back C6 neck.
All the best,
Murray.
Give it a try, it sounds about right on the second pos with the back C6 neck.
All the best,
Murray.
'99 Zum D-10 9x8,
'64 L Series "P" Bass,
Peavey Session 500,
Telonics TCA-500C & FP-100D pedal.
Steelers Choice Sidekick & Backrest.
Steelers Choice Seat.
'64 L Series "P" Bass,
Peavey Session 500,
Telonics TCA-500C & FP-100D pedal.
Steelers Choice Sidekick & Backrest.
Steelers Choice Seat.