Being Ben Keith

About Steel Guitarists and their Music

Moderator: Shoshanah Marohn

Neal Vosberg
Posts: 76
Joined: 20 Oct 2017 10:35 am
Location: Tennessee, USA

Being Ben Keith

Post by Neal Vosberg »

When I played six string regularly, my main inspirations were players like Reggie Young, Joe South. Guys that just play the perfect thing at the right time. The steel player that most aligns with that philosophy, in my opinion, has to be Ben Keith. I've spent a lot of time trying to play in his same style, knowing that he was "limited" to a 3x1 steel.

I've found the importance of tone. So important. Tone and volume. Once those are established you can approach songs simply and effectively. If your tone is sour, it doesn't matter how perfect your part is.

Lots of single string licks, or just things as simple as the B pedal on the third string, on the third fret, and only that, to play over a C. Also navigating the melody on 4&6 with the B and C pedals. I know he didn't use it, but using the E->F lever with 4&6 can give you a lot, as well as the E lower, which he did have.

Thats all I've got for now!
Ray Minich
Posts: 6429
Joined: 22 Jul 2003 12:01 am
Location: Bradford, Pa. Frozen Tundra

Post by Ray Minich »

I believe he did the steel on Patsy Cline's "I fall to pieces". One of my all time favorites. Nice harmonics at just the right time too.
Lawyers are done: Emmons SD-10, 3 Dekleys including a D10, NV400, and lots of effects units to cover my clams...
Henry Nagle
Posts: 933
Joined: 8 Jan 2004 1:01 am
Location: Santa Rosa, California
Contact:

Post by Henry Nagle »

He's one of my absolute favorites too. When I first started playing steel his playing was one of my main inspirations.

He was such a minimalist. On the chorus of Out On A Weekend he keeps hitting just that one note, and it's so perfect. It drives the song forward so well. That's a rare gift.

It's funny to me that my other favorite is Ralph Mooney, who was one of those very rare players who could play and phrase throughout an entire song and have it all somehow fit just right.

Two completely different approaches, but both of them brilliant. Of course, the context is key too.
User avatar
Jeremy Threlfall
Posts: 1380
Joined: 3 Aug 2006 12:01 am
Location: now in Western Australia

Post by Jeremy Threlfall »

I am Ben Keith in a popular Neil Young tribute show ("The Human Highway") in Australia. I play steel and guitar parts

BKs steel parts are much harder to get sounding right than they appear to be on paper

I would say he is one of the masters of touch
User avatar
Jonathan Shacklock
Posts: 675
Joined: 11 Jan 2006 1:01 am
Location: London, UK
Contact:

Post by Jonathan Shacklock »

For a short time I was a tribute 'Ben Keith' too, and yes I totally agree, very difficult to get the magic pitch and tone. This one was my favourite to play but I definitely miss some pitches and tones here and there, sorry! https://youtu.be/5nodXEb4Nrk

I tried to learn most things by rote. I found if I just jammed along in the standard positions it didn't sound right. Everything he played seemed like a perfectly orchestrated part, perfectly placed in the music. And yet so often Neil Young's recordings are almost entirely off the cuff. Ben had a great ear and a wonderful instinct for music.
Last edited by Jonathan Shacklock on 6 Jul 2018 10:31 am, edited 1 time in total.
User avatar
Jeremy Threlfall
Posts: 1380
Joined: 3 Aug 2006 12:01 am
Location: now in Western Australia

Post by Jeremy Threlfall »

Sounds to me like you've got it all there and sounding right, real nice playing. That's a great rendition of BK doing his thing, well done

great band name too
User avatar
Jonathan Shacklock
Posts: 675
Joined: 11 Jan 2006 1:01 am
Location: London, UK
Contact:

Post by Jonathan Shacklock »

Thanks Jeremy, you're too kind, unfortunately that band bit the dust very quickly. As you know it's a lot of fun trying to chase down Ben Keith's sound, I'd recommend every player try out at least one of his songs and really try to nail al the nuances. I only wish I could remember half of the things I learned!
User avatar
scott murray
Posts: 2752
Joined: 4 Aug 1998 11:00 pm
Location: Asheville, NC

Post by scott murray »

just stumbled on this KILLER footage of Ben Keith with Faron Young... wow

https://www.youtube.com/watch?v=Z7C39atFn1I
1965 Emmons S-10, 3x5 • Emmons LLIII D-10, 10x12 • JCH D-10, 10x12 • Beard MA-8 • Oahu Tonemaster
Fish
Posts: 574
Joined: 25 Feb 1999 1:01 am

Post by Fish »

This footage of Faron Young with Ben Keith on his early Sho~Bud is really remarkable. What great playing on both E9th and C6th tunings.

This reminds me of something Buddy Emmons says in his memoirs:
"It was Jimmy [Day], Ben Keith, and myself who used to stay up for days and nights and carve all the early licks out while the other steel players slept."

His friends know that Buddy was never much for boasting or tootin' his horn. This quote is out of the ordinary for him, but it captures the spirit of another era, when he liked to say he was "22 and bullet proof."
User avatar
Barry Blackwood
Posts: 7352
Joined: 20 Apr 2005 12:01 am

Post by Barry Blackwood »

Great footage that exemplifies the "spirit of another era" mentioned earlier. Ben sat high at the steel and by the way he's rocking his foot, it looks like he had the Day setup on the money neck. Also, a curled finger grip similar to Jay Dee. I wonder whatever happened to the guitar he was playing....
John Brabant
Posts: 774
Joined: 28 Jun 1999 12:01 am
Location: Calais, VT, USA

Post by John Brabant »

Wow amazing video of Big Ben as a young and handsome dude. I never heard him play like that. Neil Flanz has a few stories about those days when Ben, Buddy and Jimmy were all living together. Musta been quite the scene. Such innovators. Reminds me of the Sam Bush/Jerry Douglas/Bela Fleck bunch back in their wild and crazy, developmental days.
John Brabant
1978 Emmons D-10 P-P
Stephen Pride
Posts: 29
Joined: 17 Oct 2011 10:42 am
Location: Berkeley, CA
Contact:

Post by Stephen Pride »

I was going to start a new thread about Ben Keith, but found this one after searching through the archives and decided to bump it instead. I am also a huge fan of his work, and have it as my goal on pedal steel to someday sound 1/10th as good as him.

I've started a playlist on Spotify:

https://open.spotify.com/playlist/1Z5oC ... fvgusyRcjQ

It can be a bit tricky to track things down. The Discogs site has been helpful, since a lot of detailed album credits are listed there. But please let me know if you have any suggestions of more things to add. I'm interested in keeping this to his pedal steel work only, so please no suggestions for things where he played dobro or lap steel, etc.

In particular, let me know if you have any details about his work with Faron Young. All the albums I can find on Discogs and AllMusic don't show up on Spotify, and vice-versa, so I'm pretty lost there.

For anyone who's not on Spotify but is still curious to see the list, here are some screen caps:

Image

Image

Image[/url]
Last edited by Stephen Pride on 14 Sep 2019 10:42 am, edited 1 time in total.
User avatar
Joachim Kettner
Posts: 7523
Joined: 14 Apr 2009 1:57 pm
Location: Germany

Post by Joachim Kettner »

Stephen, on the Bird On The Wire record it was not Ben but Bill Keith, I know because I have the LP.
There's a recently released record by Neil Young called "Tuscaloosa".
And a record by a Dan Sampson on which he played on one title. It's not on U-tube.
Fender Kingman, Sierra Crown D-10, Evans Amplifier, Soup Cube.
Stephen Pride
Posts: 29
Joined: 17 Oct 2011 10:42 am
Location: Berkeley, CA
Contact:

Post by Stephen Pride »

Thanks Joachim, I see you are correct about the Tim Hardin. Discogs lists Ben Keith as the steel player, but they also have the back cover available as an image, and when I zoom in, it does indeed say Bill Keith. I'll remove that one from the playlist.

Good tip on the Neil Young Tuscaloosa, I'll go through that one and add anything where I hear him, thanks.

Dan Sampson doesn't seem to be on Spotify either, so unfortunately I can't add that one.
Chris Bauer
Posts: 3067
Joined: 4 Aug 1998 11:00 pm
Location: Nashville, TN USA

Post by Chris Bauer »

From the Musician’s Hall of Fame in Nashville where there’s a nice tribute to Ben along with his Push/Push S10 that we’ve all heard and loved.

Image
User avatar
Bill Cunningham
Posts: 2092
Joined: 6 Aug 1998 12:01 am
Location: Atlanta, Ga. USA

Post by Bill Cunningham »

Fish wrote:This footage of Faron Young with Ben Keith on his early Sho~Bud is really remarkable. What great playing on both E9th and C6th tunings.

This reminds me of something Buddy Emmons says in his memoirs:
"It was Jimmy [Day], Ben Keith, and myself who used to stay up for days and nights and carve all the early licks out while the other steel players slept."

His friends know that Buddy was never much for boasting or tootin' his horn. This quote is out of the ordinary for him, but it captures the spirit of another era, when he liked to say he was "22 and bullet proof."
I have a Darrell McCall box set with a lot of tunes from that era that Ben is on. Good stuff!
Bill Cunningham
Atlanta, GA
John Brabant
Posts: 774
Joined: 28 Jun 1999 12:01 am
Location: Calais, VT, USA

Post by John Brabant »

Stephen:

I am listening to your Ben Keith playlist on Spotify now over my Sunday morning coffee. Lot's of memories packed in there. Thank you. May I suggest that you add to your list Neil Young's " Hey Babe" which is on his late 70s album "American Stars and Bars". I was new to steel in 1979 and bought that album just because of the steel in that song. Simple but soooo nice!
John Brabant
1978 Emmons D-10 P-P
David Mitchell
Posts: 1033
Joined: 18 Apr 2015 4:35 pm
Location: Tyler, Texas

Post by David Mitchell »

I played the part of Ben Keith on this Patsy Cline classic. I played all the instruments for that matter. Fun little album we did of old songs just me and my friend Sandy a flight attendant not a professional singer. Ben played a rather unique and haunting part on this song. Maybe it was his first hit. I remember when it was a brand new song on the radio. I was already playing by then. Shocked to read about her death in the morning paper.

https://youtu.be/7j_VzYN37bg
Zachary Smith
Posts: 13
Joined: 21 Oct 2018 6:13 pm
Location: New Jersey, USA

Post by Zachary Smith »

If you want to hear some real good Ben Keith playing check out the album A Treasure by Neil Young and the International Harvesters. It is on Spotify but not under Neil Young for some reason. It’s the most straight country thing I’ve heard Neil Young do and Ben Keith plays pedal steel on every track.
Stephen Pride
Posts: 29
Joined: 17 Oct 2011 10:42 am
Location: Berkeley, CA
Contact:

Post by Stephen Pride »

John Brabant wrote:Stephen:

I am listening to your Ben Keith playlist on Spotify now over my Sunday morning coffee. Lot's of memories packed in there. Thank you. May I suggest that you add to your list Neil Young's " Hey Babe" which is on his late 70s album "American Stars and Bars". I was new to steel in 1979 and bought that album just because of the steel in that song. Simple but soooo nice!
Hi John, I am delighted to know that you're enjoying the playlist. I added "Hey Babe," and you're right, that's a wonderful pedal steel part. Thanks for the tip!

I also added everything from the Neil Young live at Tuscaloosa album where I hear pedal steel. And I'm going to check through that International Harvester stuff, too, thanks for pointing that out Zachary. The Wikipedia page for that album says Ben Keith played pedal steel, lap slide, and "stringman." For every track where I am sure I'm hearing pedal steel, I'll add it to the playlist.

Anyone out there think they can identify Faron Young tracks on Spotify where BK is playing pedal steel?
User avatar
James Mayer
Posts: 1526
Joined: 5 Sep 2006 12:01 am
Location: back in Portland Oregon, USA (via Arkansas and London, UK)

Post by James Mayer »

Thanks for creating that playlist. I subscribed and listened to it over the weekend. Hoping to see it grow.
User avatar
Marc Jenkins
Posts: 1627
Joined: 11 Mar 2007 7:23 pm
Location: Victoria, British Columbia, Canada

Post by Marc Jenkins »

Yes thanks for the playlist! I think both Alabama and Words should be included - minimalist parts but two of my faves!
User avatar
Frank Freniere
Posts: 3706
Joined: 23 Oct 1999 12:01 am
Location: The First Coast

Post by Frank Freniere »

David Mitchell wrote:I played the part of Ben Keith on this Patsy Cline classic. I played all the instruments for that matter. Fun little album we did of old songs just me and my friend Sandy a flight attendant not a professional singer. Ben played a rather unique and haunting part on this song. Maybe it was his first hit. I remember when it was a brand new song on the radio. I was already playing by then. Shocked to read about her death in the morning paper.

https://youtu.be/7j_VzYN37bg
Ben played on a lot of Patsy Cline releases. "Loving in Vain" is a good one.
Jim Pitman
Posts: 1901
Joined: 29 Aug 1998 12:01 am
Location: Waterbury Ctr. VT 05677 USA

Post by Jim Pitman »

I love Ben's choice of seating in that Faron Young video. If I could fit a barrel in my trunk....... Great player. I think he played on Neil Young's Harvest record. - very ethereal. His simple licks with perfect tone and volume swells became the signature of many of the tunes on that record.
Donny Hinson
Posts: 21192
Joined: 16 Feb 1999 1:01 am
Location: Glen Burnie, Md. U.S.A.

Post by Donny Hinson »

Frank Freniere wrote: Ben played on a lot of Patsy Cline releases. "Loving in Vain" is a good one.
Yes, and "Shoes" too. Here's links:

https://www.youtube.com/watch?v=K3C6i54ua1c

https://www.youtube.com/watch?v=cP2P8fCOnMI

I really like that old 1950s and 1960s pedal steel work, the style that was popular before everything became gobs of pedals and knee levers, and tricky moves that mostly impress only other pedal steelers. That stuff was simple and basic, but terribly expressive. Somewhere along, we lost sight of those qualities.
Post Reply