S-10 Excel C6th Pedal Steel $1750 Shipped/Lower 48

Pedal, lap, Hawaiian, resonator ... anything played with a bar
Locked
User avatar
Mike DiAlesandro
Posts: 1503
Joined: 8 May 2010 7:36 am
Location: Kent, Ohio
Contact:
Contact Mike DiAlesandro

S-10 Excel C6th Pedal Steel $1750 Shipped/Lower 48

Post by Mike DiAlesandro »

Just checking to see if there is any interest in a dedicated C6th pedal steel. 5 pedals and 2 knees (RKL and RKR). Setup standard C6th, with G on top, knee levers lower 3rd a 1/2 and raise 4 a 1/2.

New split road cases, and 2 leg extensions so you can play like a console steel standing up. Extra pedal included, but not installed.

This is a lightweight setup. The guitar weighs 27# set up, and the main case weighs 10#, and the pedal bar/leg case weighs 5-6#.

$1750 shipped in the lower 48.

Bank check, or Paypal if you pay the 3% fee.

I also would trade this guitar and some cash for an all-pull mica D-10 with 8x5 minimum.

PM for any questions, Thanks Mike




Image

Image

Image

Image

Image

Image
Last edited by Mike DiAlesandro on 4 Aug 2019 3:54 pm, edited 7 times in total.
Top
User avatar
Nicholas Scott
Posts: 781
Joined: 12 Apr 2016 10:15 am
Location: Norfolk, VA USA

Post by Nicholas Scott »

Nice guitar Mike! Good luck with the sale!
Emmons D10 PP, Peavey Nashville 112, Quilter Steelaire, Goodrich OMNI VP, And Sarno Black Box, Walker Steel Seat
Top
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:
Contact Ian Rae

Post by Ian Rae »

Every so often someone enquires whether there's such a thing as a single C6 - well there's your answer!

Nice instrument.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Top
Russell Adkins
Posts: 678
Joined: 19 Apr 2013 8:29 am
Location: Louisiana, USA

excel

Post by Russell Adkins »

is this guitar anything like the jerry byrd excel as far as size wise goes I had a jb model once , never had a excel pedal steel though, love the fact that' its a c6 though.
Top
User avatar
scott murray
Posts: 2752
Joined: 4 Aug 1998 11:00 pm
Location: Asheville, NC

Post by scott murray »

pic of the underside?

I'm assuming left knee levers and even more pedals can be added
1965 Emmons S-10, 3x5 • Emmons LLIII D-10, 10x12 • JCH D-10, 10x12 • Beard MA-8 • Oahu Tonemaster
Top
User avatar
Mike DiAlesandro
Posts: 1503
Joined: 8 May 2010 7:36 am
Location: Kent, Ohio
Contact:
Contact Mike DiAlesandro

Post by Mike DiAlesandro »

Nicholas and Ian - Thanks for the kind words about this guitar

Russell - I am not sure, they may be quite different...

Scott - Here are a few undercarriage shots with the open cases with the extra pedal, pedal rod, bellcrank and 2 different length pull rods and tuning nuts.
The 6th cross-shaft is already installed, every part you need for the 6th pedal is included, excluding the proper length pull rods.


Image


Image


Image


Image
Top
User avatar
b0b
Posts: 29108
Joined: 4 Aug 1998 11:00 pm
Location: Cloverdale, CA, USA
Contact:
Contact b0b

Post by b0b »

Volume and tone knobs, too. Very cool guitar! 8)
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
Top
User avatar
Mike DiAlesandro
Posts: 1503
Joined: 8 May 2010 7:36 am
Location: Kent, Ohio
Contact:
Contact Mike DiAlesandro

Post by Mike DiAlesandro »

Thanks bOb! :)
Top
User avatar
Rick Winfield
Posts: 941
Joined: 22 Feb 2007 12:45 pm
Location: Pickin' beneath the Palmettos

C6

Post by Rick Winfield »

Beautiful guitar !
Exactly what I wanted
BUT ……
I don't have the cash
Good luck with your sale.
Rick
Top
User avatar
Mike DiAlesandro
Posts: 1503
Joined: 8 May 2010 7:36 am
Location: Kent, Ohio
Contact:
Contact Mike DiAlesandro

Re: C6

Post by Mike DiAlesandro »

Rick Winfield wrote:Beautiful guitar !
Exactly what I wanted
BUT ……
I don't have the cash
Good luck with your sale.
Rick

Thanks Rick! - Hopefully this guitar will find a home with someone who can use it to it's full potential. Smile
Top
Tom Lennon
Posts: 22
Joined: 26 Mar 2019 5:50 pm
Location: Ojai, California, USA

Excel C6

Post by Tom Lennon »

Wow! That's the cleanest undercarriage I've seenl. Is that typical of the Excel guitars?
I'm new to the PSG but while looking for an instrument to buy i've perused many and this one takes the cake for clarity.
Can this guitar be set up E6?
Top
User avatar
Nicholas Scott
Posts: 781
Joined: 12 Apr 2016 10:15 am
Location: Norfolk, VA USA

Post by Nicholas Scott »

Tom, my D10 Excel under carriage is as clean as this guitar so I would have to say yes. Extremely well built instruments and very easy to work on. Surprised this hasn’t sold yet Mike!
Emmons D10 PP, Peavey Nashville 112, Quilter Steelaire, Goodrich OMNI VP, And Sarno Black Box, Walker Steel Seat
Top
User avatar
Mike DiAlesandro
Posts: 1503
Joined: 8 May 2010 7:36 am
Location: Kent, Ohio
Contact:
Contact Mike DiAlesandro

Re: Excel C6

Post by Mike DiAlesandro »

Tom Lennon wrote:Wow! That's the cleanest undercarriage I've seenl. Is that typical of the Excel guitars?
I'm new to the PSG but while looking for an instrument to buy i've perused many and this one takes the cake for clarity.
Can this guitar be set up E6?
Tom, are you asking if it can be setup E9th? It can easily be setup to E9th, but the 5 pedal 2 knee lever configuration is a standard C6th pedal/knee combination. A 3 pedal 4-5 knee lever configuration is the standard for E9th. I am checking with the builder to see if any knee lever kits are available.

Hope this helps, Mike
Top
User avatar
Mike DiAlesandro
Posts: 1503
Joined: 8 May 2010 7:36 am
Location: Kent, Ohio
Contact:
Contact Mike DiAlesandro

Undercarriage

Post by Mike DiAlesandro »

I had a few questions in regards to if knee levers were available, and if the aluminum sub frame was predrilled for easy installation. I believe so, here are a few photos that indicate this:


Image


Image


Image


Image
Top
User avatar
Mike DiAlesandro
Posts: 1503
Joined: 8 May 2010 7:36 am
Location: Kent, Ohio
Contact:
Contact Mike DiAlesandro

Anyone interested?

Post by Mike DiAlesandro »

TTT
Top
User avatar
john widgren
Posts: 2623
Joined: 24 Nov 1998 1:01 am
Location: Wilton CT

Excel

Post by john widgren »

Hi Mike,

My Pal Tim Kelly sent you an email from my computer the other day. If you did not get it feel free to contact me at widcj@hotmail.com... and I'll provide info to contact him via email or phone if you want. I'm not involved in this at all tho..

Regards and best,

JW
Steel Guitar Services:
Live performance and recording. Instruments, repairs and lessons. Fresh bait/discount sushi.
(203) 858-8498
widcj@hotmail.com
Top
User avatar
Mike DiAlesandro
Posts: 1503
Joined: 8 May 2010 7:36 am
Location: Kent, Ohio
Contact:
Contact Mike DiAlesandro

Post by Mike DiAlesandro »

Hey John,
Thanks, Tim contacted me and we discussed a possible trade for his Fessenden, but he isn't quite sure he wants to let it go quite yet.


As of 08/02/19:

I have 1 close cash offer (but not enough to really make me jump on it), and a trade offer for a Fessenden S-12, but what I really need is a mica D-10, I am willing to put up a fair amount of cash to even out the deal. Let me know what you have.

Thanks,
Mike
Top
User avatar
Mike DiAlesandro
Posts: 1503
Joined: 8 May 2010 7:36 am
Location: Kent, Ohio
Contact:
Contact Mike DiAlesandro

Ttt

Post by Mike DiAlesandro »

How about $1750 shipped lower 48, payment with bank check.

Paypal ok if you want to pay the 3% fee. :)
Top
Kent Viles
Posts: 193
Joined: 11 Oct 2016 2:13 pm
Location: Colorado, USA
Contact:
Contact Kent Viles

Post by Kent Viles »

Heck yeah, been watching this, let’s do it! I’ll take it. 1750.00. castlecreekguitars.com. Thanks!
Top
User avatar
Mike DiAlesandro
Posts: 1503
Joined: 8 May 2010 7:36 am
Location: Kent, Ohio
Contact:
Contact Mike DiAlesandro

Post by Mike DiAlesandro »

Kent Viles wrote:Heck yeah, been watching this, let’s do it! I’ll take it. 1750.00. castlecreekguitars.com. Thanks!
Sold pending payment! :D
Top
Locked

Return to “For Sale: Steel Guitars”