Various Accessoires

Amplifiers, effects, recording equipment, seats, racks, parts, or anything else.
Post Reply
User avatar
Barry Yasika
Posts: 383
Joined: 13 Dec 2002 1:01 am
Location: Bethlehem, Pa.

Various Accessoires

Post by Barry Yasika »

Have several accessories for sale
Image
Image
Image
Image
Image

Volume Pedals, $120 Each, one pedal has the old Goodrich Pot, the other has a dunlop pot. I have another Dunlop pot I'll sell with either pedal for 25 buck, never been used., Peterson VSII Tuner $100, All 4 Tone bars and finger picks $100 for all most are Dunlap pick,there are 3 JF Diamond Pick and Two Chrome plated BF Newman Pick, Two Boss effects Pedal board $25 Each. I'll sell all 4 pedals for $100 total, It's been some time since I've used them and although I check them out, I'm not sure how dependable they'd be. I also have a Peavey Nashville 400 Head not pictured, no cabinet. It makes a lot of scratch and pop sounds as you dial through the setting. I can let it go for $100 for parts. This is stuff I've collected over the years and no longer needed. Thanks for takin a peek.

See something you like, PM me with an offer. The small stuff add 10 bucks for shipping, the amp head buyer will have to pay actual shipping.

Buy the way, I forgot to mention $400 plus shipping takes everything you see including the NV400 amp head.
Emmons
Michael Howard
Posts: 10
Joined: 28 Feb 2014 10:32 am
Location: Ermine, KY USA

Accessories

Post by Michael Howard »

PM sent
User avatar
Bill A. Moore
Posts: 1310
Joined: 2 Jul 2007 3:17 pm
Location: Silver City, New Mexico, USA

Post by Bill A. Moore »

I would like the Nash 400 chassis. Can you give shipping to 88061?
Paul Norman
Posts: 2600
Joined: 18 Mar 2005 1:01 am
Location: Washington, North Carolina, USA

Post by Paul Norman »

Put me next in line for the NV400 chassis if Bill doesn't get it.
Paul Norman
Washington, N. C.
User avatar
Sonny Jenkins
Posts: 4376
Joined: 19 Sep 2000 12:01 am
Location: Texas Masonic Retirement Center,,,Arlington Tx

Post by Sonny Jenkins »

I PM'ed Barry just after it posted,,,hope I'm first in line for the Chassis. Havn't heard back.
Paul Norman
Posts: 2600
Joined: 18 Mar 2005 1:01 am
Location: Washington, North Carolina, USA

Post by Paul Norman »

Maybe he will answer you Sonny. That will make me third. I can fix it and build a cabinet.
User avatar
Barry Yasika
Posts: 383
Joined: 13 Dec 2002 1:01 am
Location: Bethlehem, Pa.

Head

Post by Barry Yasika »

Sonny, I did answer you at what the Forum clock says 5:45AM. Let me have your normal email addy. Sorry man, I was not ignoring you.
Emmons
User avatar
Barry Yasika
Posts: 383
Joined: 13 Dec 2002 1:01 am
Location: Bethlehem, Pa.

Responce problems.

Post by Barry Yasika »

I'm not sure what seems to be causing the problem with me getting responses to you folks out there. I Know I sent pictures of the NV400 head to to Sonny on his personal email account. Sonny did you ever get them? I was waiting to hear back from you. let me know and I'll send them again to you peronal email account. Sorry for any confusion.
Emmons
User avatar
Barry Yasika
Posts: 383
Joined: 13 Dec 2002 1:01 am
Location: Bethlehem, Pa.

Good Rich Pedals

Post by Barry Yasika »

In the mean time, the Goodrigh pedeal with the dunlop pot and the gGoodrich pedal with the old pot installed but comes with a new dunlop pot are now reduced to $100 a piece. Who ever gets the the one with the old pot has to change it out him or herself. Great Pedals, but I'm hung up on Hilton.
Emmons
User avatar
Barry Yasika
Posts: 383
Joined: 13 Dec 2002 1:01 am
Location: Bethlehem, Pa.

Got two.

Post by Barry Yasika »

Sonny Jenkins wrote:I PM'ed Barry just after it posted,,,hope I'm first in line for the Chassis. Havn't heard back.
I got two of them. Same price for both. Both need some ponderin to get around around to fixin what wrong with em. So If you don't get one, get the other. I used these things for 40 years, way way way paid for themselves over and over again. I hope these amps can tell you stories :) Anyway, both are still available. $100, you buy em, you fly em.
Emmons
User avatar
Sonny Jenkins
Posts: 4376
Joined: 19 Sep 2000 12:01 am
Location: Texas Masonic Retirement Center,,,Arlington Tx

Post by Sonny Jenkins »

Barry,,,I got the pics,,,emailed you back for shipping cost. Just got your PM with phone number,,tried to call,,left VM. Yes,,,let me know shipping cost and paypal info.
Don Mogle
Posts: 1469
Joined: 10 Aug 2000 12:01 am
Location: Round Rock, TX, USA

NV 400 head

Post by Don Mogle »

Please put me #4-6 in line for the NV 400 head if nobody else wants it. Probably impossible.

By the way, I had requested one of these in the "Wanted to Buy" section. Wish more folks would look at this now and then before posting their ads.

Thanks,

Don
User avatar
Sonny Jenkins
Posts: 4376
Joined: 19 Sep 2000 12:01 am
Location: Texas Masonic Retirement Center,,,Arlington Tx

Post by Sonny Jenkins »

Hey guys,,I just talked to Barry,,,he is having communication problems,,,,he apologizes if anyone feels left out of the loop. We are trying to find out shipping cost on one of the amps,,,maybe both,,,we'll know by this time tomorrow.
User avatar
Barry Yasika
Posts: 383
Joined: 13 Dec 2002 1:01 am
Location: Bethlehem, Pa.

Pedals and pedal boars.

Post by Barry Yasika »

saow some offer that hage gone away.. Sill Open 100 bucks takes what you see.
Emmons
User avatar
Barry Yasika
Posts: 383
Joined: 13 Dec 2002 1:01 am
Location: Bethlehem, Pa.

nv 400.....another one still open

Post by Barry Yasika »

Still got one more NV400....$100 pluse I split the shipping
Emmons
User avatar
Barry Yasika
Posts: 383
Joined: 13 Dec 2002 1:01 am
Location: Bethlehem, Pa.

Post by Barry Yasika »

I know someone was intersted the the board and pedals. $100 blus shipping .............yours rembember the pedals are are old and I don't have confidence. Either way, ya get the board which does work and the interconnect cable.
Emmons
Don Mogle
Posts: 1469
Joined: 10 Aug 2000 12:01 am
Location: Round Rock, TX, USA

Nv 400

Post by Don Mogle »

I'll take a NV 400 for $100 plus 50% Shipping. Please email pictures to dlmshobud@gmail.com.

Please email or PM me for payment details...if it hasn't been sold already.

Don
User avatar
Bill A. Moore
Posts: 1310
Joined: 2 Jul 2007 3:17 pm
Location: Silver City, New Mexico, USA

Post by Bill A. Moore »

Barry, did you get a quote on shipping yet? Is the other chassis the same as the other, working, but noisy?
User avatar
Sonny Jenkins
Posts: 4376
Joined: 19 Sep 2000 12:01 am
Location: Texas Masonic Retirement Center,,,Arlington Tx

Post by Sonny Jenkins »

I just sent Barry a PM withdrawing my interest in the 400 chassis, I've got too many projects going. So, the next guys in line can jump in.
Herb Steiner
Posts: 12505
Joined: 4 Aug 1998 11:00 pm
Location: Spicewood TX 78669
Contact:

Post by Herb Steiner »

I would like the Jeff Newman picks, the JF Diamond and the BF chrome. PM you with an offer.
My rig: Infinity and Telonics.

Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
Paul Norman
Posts: 2600
Joined: 18 Mar 2005 1:01 am
Location: Washington, North Carolina, USA

Post by Paul Norman »

I emailed you Barry.
User avatar
Barry Yasika
Posts: 383
Joined: 13 Dec 2002 1:01 am
Location: Bethlehem, Pa.

What's left

Post by Barry Yasika »

Preview
PostPosted 18 Jul 2019 6:07 pm What's Left
Both Boss pedal board.
Boss Chours, Boss Delay, Gone
Boss Distortion Gone,
MXR Red Compressor. Gone

All effects haven't been used is years so they're all cheap. I don't know if they work or now.

This tuner works perfectly Peterson VSII Strobe Tuner $100

New TC Electroics Mojo Overdrive $55 Gone
New Boss Turbo overdrive - used but works $50
Korg DIgital Rack Tuner with Rack 100 for both - Pics are listed under Korg Rack Tuner, Rack.
midiverb. ON HOlD
2 (Two) Goodrich Volume pedals. One has the the Dunlop Pod installed, the other has the old pod installed but I have a brand new dunlop pot for it with instructions to install it. 100 either for each pedal.

Still have One NV400 Chasis left with the guts (no Cabinet) and at this point all I'm going to say is they need work or can be used for parts. $100 Each plus shipping. . I've seen knobs for things things sell for 20 bucks a piece. Once of the two NV400 Chasis is ON HOLD
One new addition is a Quilter Tone block 200. Works fine, but wasn't what I was looking for. $225, where can ya buy that much power for @225?..It's up to you. Comes with power cable but I got it with no case so it goes with no case.

All items are open to Best offer. First highest - come first serve.

Anyway, I'll give this a week or so and then it goes back into storage for another year or two and I'll try again. Thanksgone
Emmons
Paul Norman
Posts: 2600
Joined: 18 Mar 2005 1:01 am
Location: Washington, North Carolina, USA

Post by Paul Norman »

Need your address Barry.
Post Reply