Correct tuner for Encore guitar.

John Lacey · From: Black Diamond, Alberta, Canada

I tried tuning my borrowed friends Encore last nite and my Hybrid tuner did not quite fit onto the tuner nuts of the Encore. Does somebody know which size is correct?

Tommy Allison · From: Transfer, Pennsylvania, USA

David Decker · From: Canton, Ohio, USA

Tommy is right on! He usually is!

John Lacey · From: Black Diamond, Alberta, Canada

That’s what Mike Yahl said too so I’ll bring a 5mm nut driver to the gig tonight.

Tommy Allison · From: Transfer, Pennsylvania, USA

Thanx Dave. That's something you'd never hear my ex-wife say.

Bobby D. Jones · From: West Virginia, USA

The fractional size is 3/16" for the tuner nut. 5mm is a close fit too. Some stores have deep well sockets in there bargain bins that work great.
Being of a softer metal, It can be drilled. Here is one I made for cranky tuner nuts.

Greg Thompson · From: Taumarunui, New Zealand

send Doug an email: doug@stageonesteelguitars.com. he has the exact tuning driver you need.
_________________
Prototype Zum Encore,5&4 NZ made Rockit Champ 60watt and 100watt Amplifiers, Hilton Pedal,NYXL Strings

John Lacey · From: Black Diamond, Alberta, Canada

Thanks for the responses guys. This was for a borrowed guitar that probably had the right tuner at his house while he was away. I grabbed a 5 mm. socket with a screw driver handle and it worked fine.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: