Adding a lever or pedal to a Mullen RP?

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Post Reply
User avatar
Michael Berry
Posts: 17
Joined: 4 Feb 2012 8:29 pm
Location: California, USA

Adding a lever or pedal to a Mullen RP?

Post by Michael Berry »

Hi all,


I have a Royal Precision 3+4 which is a great guitar in my experience. Or at least compared to the Carter Starter I started with :)

Anyway, I'm thinking about what would be involved in adding a knee lever or additional pedal. Is this a fairly easy task for someone who's not afraid to cut their knuckles? If so, what would be the most useful change and a lever or a pedal?

Thanks folks. This forum is invaluable!
Top
Danny Letz
Posts: 1973
Joined: 24 Feb 2006 1:01 am
Location: Old Glory,Texas, USA 79540

Post by Danny Letz »

I added a verticle and a Franklin pedal to a RP for a friend of mine. It was a fairly easy guitar to work on comparatively speaking. I do have some experience though. Drilling the holes for the pedal mount was touchy & after the fact I found that they had drilled a template into the wooden plank that they had the rods taped to for shipping. The folks at Mullen were taking care of me but I didn’t have enough sense to find it.
Top
Post Reply

Return to “Pedal Steel”