Pedal Steel Posture
Moderator: Shoshanah Marohn
-
- Posts: 12
- Joined: 28 Mar 2019 7:43 am
- Location: Texas, USA
Pedal Steel Posture
I’ve got a bad problem with slouching and my back has been hurting from long hours of practice. I try to be mindful of it but after a while I find myself slouching again.
Are there any pedal steel seats that help this?
I know there are wedges I can get to put in a seat that help posture.
Currently sitting on a drum throne.
Are there any pedal steel seats that help this?
I know there are wedges I can get to put in a seat that help posture.
Currently sitting on a drum throne.
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
- Stu Schulman
- Posts: 6526
- Joined: 15 Oct 1998 12:01 am
- Location: Ulster Park New Yawk (deceased)
James,Jimmy Day slouched,and very well,I could never get a drum throne to work for me,I use a "Steel Seat.Com seat every now and then I still have to stand up and wiggle a bit.
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
-
- Posts: 2136
- Joined: 11 Jul 2001 12:01 am
- Location: New Orleans, LA, USA
For decades, I cheaped out on a seat.
It was a box with a cushion and a back. It held my gear, and kept my butt off the floor. It did the job, and I played a ton of jobs on it.
I recently changed my opinion. I got a seat from Joe Naylor at steelseat.com, and learned the following:
The firmness of the foam forced me to maintain the correct posture, which was consistently repeatable , every time. I believe that’s important, or so I’m told by players I’ve taken lessons from. I might add I am/was a major sloucher. This helped me correct that.
The firmer foam is also much more comfortable than my previous seat.
If you buy one, measure carefully, I think you want you thighs parallel tp the ground. Most builders will make it the height you want if you need over or under standard..
You can put a shim on the bottom of the seat ( where the legs attach), to make an existing seat taller, or you can buy threaded inserts that can be used to extend or level a seat, but They are a bit pricey.
Joe has a wait time of about 2 months or so, so there’s that. I got the impression from speaking with him in Dallas that he was looking to retire before he started building seats, so if you wanted one, I’d order it.
For me , it’s been a great investment. I wish I had done it twenty years ago.
It was a box with a cushion and a back. It held my gear, and kept my butt off the floor. It did the job, and I played a ton of jobs on it.
I recently changed my opinion. I got a seat from Joe Naylor at steelseat.com, and learned the following:
The firmness of the foam forced me to maintain the correct posture, which was consistently repeatable , every time. I believe that’s important, or so I’m told by players I’ve taken lessons from. I might add I am/was a major sloucher. This helped me correct that.
The firmer foam is also much more comfortable than my previous seat.
If you buy one, measure carefully, I think you want you thighs parallel tp the ground. Most builders will make it the height you want if you need over or under standard..
You can put a shim on the bottom of the seat ( where the legs attach), to make an existing seat taller, or you can buy threaded inserts that can be used to extend or level a seat, but They are a bit pricey.
Joe has a wait time of about 2 months or so, so there’s that. I got the impression from speaking with him in Dallas that he was looking to retire before he started building seats, so if you wanted one, I’d order it.
For me , it’s been a great investment. I wish I had done it twenty years ago.
-
- Posts: 1033
- Joined: 18 Apr 2015 4:35 pm
- Location: Tyler, Texas
At home and studio I always use a nice office chair. It's adjustable up and down. It swivels side to side and the back is adjustable. You can make the back stiff or you can make it springy. Of course it is not practical for out of the house gigs and for that I carry two nice steel guitar pack-a-seat. I use to play a gig every day of the week and 2 gigs on Friday and Sat. but I've retired now at 65 and the office chair works great for that.
- Charley Bond
- Posts: 915
- Joined: 4 Aug 1998 11:00 pm
- Location: Inola, OK, USA
Pedal Steel Iron Seat
The center part of that Seat oughta be good for your hemorrhoids...
Steel Guitar players are members of a Special Family
-
- Posts: 1033
- Joined: 18 Apr 2015 4:35 pm
- Location: Tyler, Texas
-
- Posts: 148
- Joined: 5 Dec 2016 11:41 am
- Location: Ohio, USA
pedal steel posture
James, check the post I made last week. I had the same problem and made a backrest for one of my Steelers Choice seats. Works great.
Emmons and Rittenberry Steel guitars plus assorted 6 string guitars
- Bryan Daste
- Posts: 1404
- Joined: 11 Jul 2005 12:01 am
- Location: Portland, Oregon, USA
- Contact:
I'm the oddball who doesn't use a pack seat. I like my ROC-N-SOC Original Saddle Drum Throne (with added backrest) - the seat shape lets my legs move freely, the height is adjustable, the stability is good, and the backrest really helps. It breaks down for transport too.
https://www.amazon.com/ROC-N-SOC-Origin ... B003L7Z0MW
https://www.amazon.com/ROC-N-SOC-W-B-R- ... B003L8H2AE
I keep the backrest set as low as possible and as forward toward the steel as possible. More like a lumbar support.
https://www.amazon.com/ROC-N-SOC-Origin ... B003L7Z0MW
https://www.amazon.com/ROC-N-SOC-W-B-R- ... B003L8H2AE
I keep the backrest set as low as possible and as forward toward the steel as possible. More like a lumbar support.
- Doug Palmer
- Posts: 895
- Joined: 23 Jan 2009 4:16 pm
- Location: Greensboro, North Carolina, USA
Seats
Don't underestimate the importance of a seat. I use a pack-a-seat on most gigs but have an adjustable piano bench for home practice or house gigs. It is great to change the height a little in an instant and makes the back feel better.
Emmons D-10, ST-10,LD-10 III, NV-112,Fender Deluxe Reverb. Authorized wholesale dealer musicorp.com!
- Joe Naylor
- Posts: 2711
- Joined: 19 Jan 2004 1:01 am
- Location: Avondale, Arizona, USA
I have several doctors say
I have some Chiropractors that are steel players or other musicians that the firm foam on my seats PLUS the same firm foam on the back rest help with back problems.
The back rest is usually not used while playing but between songs or to rest your back even if you do not have back problems.
Recently I had customers that started using my seat after using an old one for a long time and after they sat on it for a gig, jam or extended time have emailed me and told me that they could definitely tell the difference.
But I hope some more of my customers chime in here.
Joe Naylor
steelseat.com
The back rest is usually not used while playing but between songs or to rest your back even if you do not have back problems.
Recently I had customers that started using my seat after using an old one for a long time and after they sat on it for a gig, jam or extended time have emailed me and told me that they could definitely tell the difference.
But I hope some more of my customers chime in here.
Joe Naylor
steelseat.com
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP
- Barry Blackwood
- Posts: 7352
- Joined: 20 Apr 2005 12:01 am
-
- Posts: 2136
- Joined: 11 Jul 2001 12:01 am
- Location: New Orleans, LA, USA
In a perfect world I prefer a steel seat.
Downside, it’s heavy to transport, the small legs sink into grass or carpet. I’m tired of dragging that thing around. The pedalboard is gone now as well.
I practice on the Steel seat. It stays at home. For gigs I take a folding keyboard bench that I bought at GC. Light and easy to move. Adjustable height. Decent support.
Posture is important. I plan on hanging a photo of Buddy Emmons in my practice room. His posture at the steel was upright and relaxed, as near perfect as his playing.
John
Downside, it’s heavy to transport, the small legs sink into grass or carpet. I’m tired of dragging that thing around. The pedalboard is gone now as well.
I practice on the Steel seat. It stays at home. For gigs I take a folding keyboard bench that I bought at GC. Light and easy to move. Adjustable height. Decent support.
Posture is important. I plan on hanging a photo of Buddy Emmons in my practice room. His posture at the steel was upright and relaxed, as near perfect as his playing.
John
- Jeremy Threlfall
- Posts: 1380
- Joined: 3 Aug 2006 12:01 am
- Location: now in Western Australia