Thanks to all. Please close

billy tam R.I.P. · From: baton rouge, louisiana

I recently acquired a valve king 1-12 that I would like to put a light weight 12" 8 ohm speaker in and have another I would use as an extension speaker. Will I run into problems doing this?
thanks in advance
Billy[/b]

Mike Brown · From: Meridian, Mississippi USA

The minimum speaker load is 8 ohms, so the external speaker would have to be a 16 ohm, as stated on the back panel.

Mike Brown · From: Meridian, Mississippi USA

Shouldn't be a problem with an external 16 ohm speaker load. Here are the 16 ohm cabs that Peavey offers;
https://peavey.com/products/index.cfm/item/658/118441
https://peavey.com/products/index.cfm/item/658/118864
https://peavey.com/products/index.cfm/item/658/1187
https://peavey.com/products/index.cfm/item/658/118785
https://peavey.com/products/index.cfm/item/658/118783
https://peavey.com/products/index.cfm/item/658/118783

Hope that this helps. You may inquire with any authorized Peavey dealer.

ajm · From: Los Angeles

Billy: Just to be clear.......

You have a combo amp that has a minimum load of 8 ohms.
You want to put an 8 ohm speaker in it.
You also want to run an external 8 ohm cabinet along with the speaker in the amp.

True?

billy tam R.I.P. · From: baton rouge, louisiana

Yes that’s correct.

Bill A. Moore · From: Silver City, New Mexico, USA

If the minimum is 8 ohms, you would need to series both 8 ohm speakers to get 16 ohms!

Mike Brown · From: Meridian, Mississippi USA

"Shouldn't be a problem with an external 16 ohm speaker load."

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: