| Author |
Topic: Hilton pedal question |
George Macdonald
From:
Vancouver Island BC Canada
|
Posted 2 Mar 2019 7:08 pm |
|
| Are the back feet on a Hilton pedal adjustable for height? Thanks, George |
|
|
|
Ian Rae
From:
Redditch, England
|
Posted 2 Mar 2019 10:36 pm
|
|
No, but I guess you could replace them.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 3 Mar 2019 3:04 am
|
|
| Hilton sells a set of adjustable feet. |
|
|
|
Tom Campbell
From:
Houston, Texas, USA
|
Posted 3 Mar 2019 5:31 am
|
|
| Bought a set at my local hardware store. Take your pedal along to the store and go to the "furniture" accessories area...there is usually a good selection of "leg gliders" there. |
|
|
|
George Macdonald
From:
Vancouver Island BC Canada
|
Posted 3 Mar 2019 6:21 am Hilton pedal
|
|
| Thanks for the replys. I thought they were available, just not sure if they came with a new pedal. |
|
|
|
Ian Rae
From:
Redditch, England
|
Posted 3 Mar 2019 9:19 am
|
|
I didn't know that, Jack - never seen them offered but I'll know better next time! 
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 3 Mar 2019 9:59 am
|
|
I got a set years ago, when I bought my first Hilton. The model with the power supply attached.
I just checked his web site and they are not listed. Must be a discontinued item. But, I would check with Keith as he may have some left over. |
|
|
|
George Macdonald
From:
Vancouver Island BC Canada
|
Posted 4 Mar 2019 4:14 pm Hilton adjustable feet
|
|
| Keith said that the adjustable feet, [he still has some,] will not fit the currently produced Hilton pedals due to a difference in the thread size. The "new" pedals have a 6/32 thread and the older style a 1/4. |
|
|
|
George Macdonald
From:
Vancouver Island BC Canada
|
Posted 13 Mar 2019 3:18 pm Hilton pedal
|
|
| My Hilton pedal arrived today and I really like it. It has been years since I have used an "active" pedal, and I had forgotten just how clean sounding they are. I did roll off the highs slightly with my Freeloader. The taper is very smooth throughout the travel. Nothing wrong with a good pot pedal either, just a different sound. |
|
|
|
