Two zking pedal steels close please
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
Two zking pedal steels close please
If you have a trade let me know I can trade up or down.
You can save the case cost buy having me build you a shipping case you can use for your case.
Very good pedal action an tone. Trouble free Solid pitch changer fingers, no two piece
Standard Emmons 24 an 1/4 scale
changer finger too stick an rub.
Contact sueking1949@gmail.com or Pm me
Your choice $1395 plus the ride
Custom fit case sold separately $150
Your welcome if your near Nashville Tennessee to come check out these Zking Keyless steels. There set up at my shop bring your picks.
All aluminum parts are buffed down too the Bell cranks.
Wood is micro sanded too 12000 grit, An has 10 coats of true oil then buffed.
Fret boards are custom made from maple An Purple Heart An are firction fit with a sound chamber under fret board.
You can save the case cost buy having me build you a shipping case you can use for your case.
Very good pedal action an tone. Trouble free Solid pitch changer fingers, no two piece
Standard Emmons 24 an 1/4 scale
changer finger too stick an rub.
Contact sueking1949@gmail.com or Pm me
Your choice $1395 plus the ride
Custom fit case sold separately $150
Your welcome if your near Nashville Tennessee to come check out these Zking Keyless steels. There set up at my shop bring your picks.
All aluminum parts are buffed down too the Bell cranks.
Wood is micro sanded too 12000 grit, An has 10 coats of true oil then buffed.
Fret boards are custom made from maple An Purple Heart An are firction fit with a sound chamber under fret board.
Last edited by Johnie King on 25 Feb 2019 8:16 pm, edited 12 times in total.
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
Pad an shelf slips on an off very sturdy hard ware u can choose to use pad an shelf or not.
Both steels lower 2,4,8, an 9 Emmons knees on the left. These steels are pull release
Very simple to tune. Lowers use Allen screws to stop the lowers to correct pitch. Raises
Work like a all pull. An yes you can change the copeadent on these steels.
Both steels lower 2,4,8, an 9 Emmons knees on the left. These steels are pull release
Very simple to tune. Lowers use Allen screws to stop the lowers to correct pitch. Raises
Work like a all pull. An yes you can change the copeadent on these steels.
Last edited by Johnie King on 19 Jan 2019 4:47 pm, edited 1 time in total.
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
Reilly I check my Emails I haven’t received one yet from you. You might try this one sueking1949@gmail.com thanks JK
-
- Posts: 13
- Joined: 26 Mar 2015 9:02 pm
- Location: Vermont, USA
Take two! Just sent to Sue address. ThanksJohnie King wrote:Reilly I check my Emails I haven’t received one yet from you. You might try this one sueking1949@gmail.com thanks JK
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
These steels play so easy the most simple trouble free set up you can buy.
Last edited by Johnie King on 26 Dec 2018 2:16 am, edited 1 time in total.
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
These are similar to Zum Encore pull release but the copeadent can be changed same as a any modern steel.
Last edited by Johnie King on 26 Dec 2018 2:23 am, edited 2 times in total.
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
Last edited by Johnie King on 4 Jan 2019 7:08 am, edited 2 times in total.
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
Last edited by Johnie King on 4 Jan 2019 6:26 am, edited 1 time in total.
-
- Posts: 124
- Joined: 19 Aug 2001 12:01 am
- Location: Toccoa, GA, USA
Email sent
Johnny, Did you get my email?
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
I don’t see email Jack maybe you could pm me. Or send email to sueking1949@gmail.com
- Dave Simonis
- Posts: 363
- Joined: 1 Feb 2009 7:32 pm
- Location: Stevens Point, WI USA
- Tony Glassman
- Posts: 4470
- Joined: 18 Jan 2005 1:01 am
- Location: The Great Northwest