Two zking pedal steels close please

Pedal, lap, Hawaiian, resonator ... anything played with a bar
Post Reply
User avatar
Johnie King
Posts: 8538
Joined: 7 Apr 2014 11:09 am
Location: Tennessee, USA

Two zking pedal steels close please

Post by Johnie King »

If you have a trade let me know I can trade up or down.
You can save the case cost buy having me build you a shipping case you can use for your case.
Very good pedal action an tone. Trouble free Solid pitch changer fingers, no two piece
Standard Emmons 24 an 1/4 scale
changer finger too stick an rub.
Contact sueking1949@gmail.com or Pm me
Your choice $1395 plus the ride
Custom fit case sold separately $150
Your welcome if your near Nashville Tennessee to come check out these Zking Keyless steels. There set up at my shop bring your picks.
Image
All aluminum parts are buffed down too the Bell cranks.
Wood is micro sanded too 12000 grit, An has 10 coats of true oil then buffed.
Fret boards are custom made from maple An Purple Heart An are firction fit with a sound chamber under fret board.
Last edited by Johnie King on 25 Feb 2019 8:16 pm, edited 12 times in total.
User avatar
Johnie King
Posts: 8538
Joined: 7 Apr 2014 11:09 am
Location: Tennessee, USA

Post by Johnie King »

Image
User avatar
Johnie King
Posts: 8538
Joined: 7 Apr 2014 11:09 am
Location: Tennessee, USA

Post by Johnie King »

Image
Image
Image
Image
Image
Last edited by Johnie King on 30 Nov 2018 10:21 am, edited 2 times in total.
User avatar
Johnie King
Posts: 8538
Joined: 7 Apr 2014 11:09 am
Location: Tennessee, USA

Post by Johnie King »

Pad an shelf slips on an off very sturdy hard ware u can choose to use pad an shelf or not.
Both steels lower 2,4,8, an 9 Emmons knees on the left. These steels are pull release
Very simple to tune. Lowers use Allen screws to stop the lowers to correct pitch. Raises
Work like a all pull. An yes you can change the copeadent on these steels.
Image
Last edited by Johnie King on 19 Jan 2019 4:47 pm, edited 1 time in total.
Reilly Graham
Posts: 13
Joined: 26 Mar 2015 9:02 pm
Location: Vermont, USA

Post by Reilly Graham »

Email sent
User avatar
Johnie King
Posts: 8538
Joined: 7 Apr 2014 11:09 am
Location: Tennessee, USA

Post by Johnie King »

Reilly I check my Emails I haven’t received one yet from you. You might try this one sueking1949@gmail.com thanks JK
Reilly Graham
Posts: 13
Joined: 26 Mar 2015 9:02 pm
Location: Vermont, USA

Post by Reilly Graham »

Johnie King wrote:Reilly I check my Emails I haven’t received one yet from you. You might try this one sueking1949@gmail.com thanks JK
Take two! Just sent to Sue address. Thanks
User avatar
Johnie King
Posts: 8538
Joined: 7 Apr 2014 11:09 am
Location: Tennessee, USA

Post by Johnie King »

If u buy a steel from me that ships too you I spend a full day packing an building a shipping crate that’s built like I build my custom cases.
Crate to hold the case an Steel.
Image
Image
Image
Image :o
User avatar
Johnie King
Posts: 8538
Joined: 7 Apr 2014 11:09 am
Location: Tennessee, USA

Post by Johnie King »

These steels play so easy the most simple trouble free set up you can buy.
Last edited by Johnie King on 26 Dec 2018 2:16 am, edited 1 time in total.
User avatar
Johnie King
Posts: 8538
Joined: 7 Apr 2014 11:09 am
Location: Tennessee, USA

Post by Johnie King »

These are similar to Zum Encore pull release but the copeadent can be changed same as a any modern steel.
Last edited by Johnie King on 26 Dec 2018 2:23 am, edited 2 times in total.
User avatar
Johnie King
Posts: 8538
Joined: 7 Apr 2014 11:09 am
Location: Tennessee, USA

Post by Johnie King »

Image
Last edited by Johnie King on 4 Jan 2019 7:08 am, edited 2 times in total.
User avatar
Johnie King
Posts: 8538
Joined: 7 Apr 2014 11:09 am
Location: Tennessee, USA

Post by Johnie King »

Image
Last edited by Johnie King on 4 Jan 2019 6:26 am, edited 1 time in total.
Jack Turlington
Posts: 124
Joined: 19 Aug 2001 12:01 am
Location: Toccoa, GA, USA

Email sent

Post by Jack Turlington »

Johnny, Did you get my email?
User avatar
Johnie King
Posts: 8538
Joined: 7 Apr 2014 11:09 am
Location: Tennessee, USA

Post by Johnie King »

I don’t see email Jack maybe you could pm me. Or send email to sueking1949@gmail.com
User avatar
Dave Simonis
Posts: 363
Joined: 1 Feb 2009 7:32 pm
Location: Stevens Point, WI USA

Post by Dave Simonis »

Any video/sound clips?
Dave Simonis

Fiddle: Zeta, Arthur Conner, many others.../Steel: GFI SD-10 Ultra.../Mandolin: Breedlove.../Guitar: Gibson, Fender, Taylor.../Amps: Peavey NV112, Evans FET 500.../Others: Hilton, Goodrich, Stereo Steel, Pendulum Pre-amp...
User avatar
Tony Glassman
Posts: 4470
Joined: 18 Jan 2005 1:01 am
Location: The Great Northwest

Post by Tony Glassman »

I second the suggestion for "sound-clips"
User avatar
Johnie King
Posts: 8538
Joined: 7 Apr 2014 11:09 am
Location: Tennessee, USA

Post by Johnie King »

Bump
Post Reply