Steel Guitar Jigsaw Puzzles

Jeffrey Smith · Post by **Jeffrey Smith** » 5 Nov 2018 5:37 pm

Craig...

Do you play steel as quickly as you work puzzles?

Jeff

Craig Stock · Post by **Craig Stock** » 6 Nov 2018 5:15 am

I don't play steel as fast as I do puzzles and that's an understatement!

Roy, I never log in, I think I registered early in the year, but usually am to lazy to log in, I will try next time. I'll take a screen shot of my time, next to so I can prove my legitimacy

Roy Heap · Post by **Roy Heap** » 6 Nov 2018 6:01 am

I believe you Craig still can't get over how fast you are.
Are you any relation to steelplayer Doug Stock for interest?

Craig Stock · Post by **Craig Stock** » 7 Nov 2018 4:57 am

Roy, No relation to Doug that I know of, as said before I do lots of puzzles during my slow work time in the winter, plus I build patios and it helps to increase my speed.

admin · Post by **b0b** » 7 Nov 2018 9:07 am

Craig Stock · Post by **Craig Stock** » 7 Nov 2018 5:58 pm

B0b, Now that's one I can't deal with, but if you can translate it to the format, I'll give it my best try.

Jim Cohen · Post by **Jim Cohen** » 7 Nov 2018 7:16 pm

Craig Stock wrote:B0b, Now that's one I can't deal with, but if you can translate it to the format, I'll give it my best try.

Have fun, Craig. See you in about four minutes...

https://www.jigsawplanet.com/?rc=play&pid=2459b5fa24e9

Post by **b0b** » 7 Nov 2018 11:43 pm

38:22

Craig Stock · Post by **Craig Stock** » 8 Nov 2018 5:03 am

Thanks Jim, I'll try it tonight.

Charlie McDonald · Post by **Charlie McDonald** » 8 Nov 2018 5:51 am

Impossible! (56:16)

Craig Stock · Post by **Craig Stock** » 8 Nov 2018 9:04 am

Charlie, you're making me nervous

Roy Heap · Post by **Roy Heap** » 8 Nov 2018 4:43 pm

43.37 hard one Jim.

Charlie McDonald · Post by **Charlie McDonald** » 8 Nov 2018 5:11 pm

I was in a motel in Tucumcari with my old sluggish laptop with crappy mouse.
It was on Route 66. Tucumcari once was Six-Shooter Siding, a notorious spot.

Jeffrey Smith · Post by **Jeffrey Smith** » 11 Nov 2018 9:01 pm

Melobar.

https://www.jigsawplanet.com/?rc=play&pid=020a9fecf790

Andy DePaule · Post by **Andy DePaule** » 16 Nov 2018 11:30 pm

Why even try any more!

admin · Post by **b0b** » 17 Nov 2018 8:22 am

Melobar 22:50

admin · Post by **b0b** » 17 Nov 2018 8:50 am

https://www.jigsawplanet.com/?rc=play&pid=385c50c01941

14:41

Charlie McDonald · Post by **Charlie McDonald** » 17 Nov 2018 1:33 pm

Finally, something sane, with wires and rods. 18:21

admin · Post by **b0b** » 17 Nov 2018 4:10 pm

More wires and rods.

https://www.jigsawplanet.com/?rc=play&pid=0d79c50bcc77

15:30

Andy DePaule · Post by **Andy DePaule** » 17 Nov 2018 4:40 pm

Hi Bob,
Both nice, but surprising to see them next to each other.
Ross sure has reduced the size and weight by a lot. As well as all the other things he has improved, even though those older ones are already so well designed.

After John got his Red Birdseye Sierra back in 1979 I was drooling to get one, but with going through a divorce and not making all that much money it was not possible back then.
Best wishes,
Andy

Andy DePaule · Post by **Andy DePaule** » 17 Nov 2018 4:59 pm

New one, My Promat D-10

https://www.jigsawplanet.com/?rc=play&pid=0b4a5121aca4

Andy DePaule · Post by **Andy DePaule** » 17 Nov 2018 5:24 pm

19:19 on my own one... Not much to brag about, but might be my best time yet.

Andy DePaule · Post by **Andy DePaule** » 17 Nov 2018 5:55 pm

24:29 on Bob's babies... Time to do some real work!

admin · Post by **b0b** » 17 Nov 2018 8:02 pm

Beautiful Promat: 12:08

Andy DePaule · Post by **Andy DePaule** » 17 Nov 2018 10:10 pm

Thanks Bob,
Jim Palenscar fixed all the things that were wrong when I received it.
Sanded and buffed out the deep end plate scratches, replaced the fretboards and tightened everything up so it played real nice.

Now Lynn Stafford has had it the last few months as he's been finishing the last Promat for a nice man in Texas*. That one was just a box of completed parts and unfinished parts and some missing when Mr. Papic died. It will be the only left handed one ever built, but Lynn needed a reference model because he's an Emmons expert and these are metric. He does beautiful work and plays well too.

*The man in Texas had paid a large deposit for his and the last two years until now had nothing to show for it. Now he will have a nice Promat, and the last one at that. I think it is number 26 or 27.

Lynn had mine back apart for all the measurements and when he got done he set it up with the tuning I like best. Can't thank him enough since I'm not ready to tackle a Push Pull just yet.
I'll be getting it back in December when I return to Oregon and think I'll keep it there for when I'm in the states.

The Steel Guitar Forum

Steel Guitar Jigsaw Puzzles

Melba

72 Minutes!

MSA Classic XL S-12

1978 and 2017 Sierras and amps

Both nice

New one, My Promat D-10

19:19 on my own one

24:29 on Bob's babies

Thanks Bob