ShoBud Pro 11 Custome 8x4(Reduced
-
- Posts: 361
- Joined: 31 Mar 2003 1:01 am
- Location: Blackriver Falls, Wisconson, USA
ShoBud Pro 11 Custome 8x4(Reduced
Black ShoBud Pro 11 custom.George L Pickups. Cleaned,Lubed,adjusted,New Live Steel Strings
not cosmetically perfect,great Tone and sustain.plays excellent.Selling for friend with Kidney failure
$2000.00 OBO Here's the story, some dummy must have had some kind of adhesive name plate on the front,and some other dummy pried it off without heating and let two gouges in the la-cure. I have filled them with Black finger nail polish. from three feet they are not noticeable, but up close they are visible . I'm still tweeking it a little, none of the pedal stops were making contact,fixed that, some of the pulls rods were not pulling straight,fix that. I need to change out a couple of tuning nuts. mechanize n is smooth ,no slop. has great sustain and clarity all the way up the neck, harmonics ring nice and clear,and clean. Best Sho-Bud I have ever played. I would keep it if I justify another guitar .Case is covered with Naugahyde, and is sturdy,not purty. I have many hours cleaning Polishing ,and adjusting this guitar to get it the way it came from the factory
.Dan Chroninger
serpix1712/3556_sho_bud_1.jpg[/img]
not cosmetically perfect,great Tone and sustain.plays excellent.Selling for friend with Kidney failure
$2000.00 OBO Here's the story, some dummy must have had some kind of adhesive name plate on the front,and some other dummy pried it off without heating and let two gouges in the la-cure. I have filled them with Black finger nail polish. from three feet they are not noticeable, but up close they are visible . I'm still tweeking it a little, none of the pedal stops were making contact,fixed that, some of the pulls rods were not pulling straight,fix that. I need to change out a couple of tuning nuts. mechanize n is smooth ,no slop. has great sustain and clarity all the way up the neck, harmonics ring nice and clear,and clean. Best Sho-Bud I have ever played. I would keep it if I justify another guitar .Case is covered with Naugahyde, and is sturdy,not purty. I have many hours cleaning Polishing ,and adjusting this guitar to get it the way it came from the factory
.Dan Chroninger
serpix1712/3556_sho_bud_1.jpg[/img]
Last edited by Dan Chroninger on 21 Oct 2018 1:11 pm, edited 4 times in total.
-
- Posts: 361
- Joined: 31 Mar 2003 1:01 am
- Location: Blackriver Falls, Wisconson, USA
-
- Posts: 4
- Joined: 10 Sep 2018 6:13 am
- Location: Ontario, Canada
-
- Posts: 25
- Joined: 27 Apr 2013 7:12 pm
- Location: Texas, USA
shobud pro 11
would you show pics of end plates and undercarriage also what about the case
-
- Posts: 361
- Joined: 31 Mar 2003 1:01 am
- Location: Blackriver Falls, Wisconson, USA
- Sandro Rocco
- Posts: 156
- Joined: 7 Feb 2012 8:52 am
- Location: St. Catharines, Ontario, Canada
-
- Posts: 361
- Joined: 31 Mar 2003 1:01 am
- Location: Blackriver Falls, Wisconson, USA
-
- Posts: 361
- Joined: 31 Mar 2003 1:01 am
- Location: Blackriver Falls, Wisconson, USA
Dan, I see you have sold this guitar but do you know the serial number? Or can you put me in contact with the person who brought it by P.M. Thanks ever so much, J.R. Rose
Black Performance SD-10, 2002. Peavey LTD 400 with 15" Eminence EPS 15-C, Sho-Bud Seat, Goodrich L-120 Pedal, Sho-Bud Bar, Picks, Cords. Nothing else.