ShoBud Pro 11 Custome 8x4(Reduced

Pedal, lap, Hawaiian, resonator ... anything played with a bar
Locked
Dan Chroninger
Posts: 361
Joined: 31 Mar 2003 1:01 am
Location: Blackriver Falls, Wisconson, USA

ShoBud Pro 11 Custome 8x4(Reduced

Post by Dan Chroninger »

Black ShoBud Pro 11 custom.George L Pickups. Cleaned,Lubed,adjusted,New Live Steel Strings
not cosmetically perfect,great Tone and sustain.plays excellent.Selling for friend with Kidney failure
$2000.00 OBO Here's the story, some dummy must have had some kind of adhesive name plate on the front,and some other dummy pried it off without heating and let two gouges in the la-cure. I have filled them with Black finger nail polish. from three feet they are not noticeable, but up close they are visible . I'm still tweeking it a little, none of the pedal stops were making contact,fixed that, some of the pulls rods were not pulling straight,fix that. I need to change out a couple of tuning nuts. mechanize n is smooth ,no slop. has great sustain and clarity all the way up the neck, harmonics ring nice and clear,and clean. Best Sho-Bud I have ever played. I would keep it if I justify another guitar .Case is covered with Naugahyde, and is sturdy,not purty. I have many hours cleaning Polishing ,and adjusting this guitar to get it the way it came from the factory

.Dan Chroninger
serpix1712/3556_sho_bud_1.jpg[/img]
Image
Image
Last edited by Dan Chroninger on 21 Oct 2018 1:11 pm, edited 4 times in total.
User avatar
Neil Lang
Posts: 1120
Joined: 18 Oct 2002 12:01 am
Location: Albert Lea, Minnesota, USA

Post by Neil Lang »

Dan, I think this is a "The Pro II" Custom. Not Super Pro II ?
Sho-Bud Steel Guitars, 3 Super Pro's, 1 Super Pro II (Rose) & 1 Finger Tip
Fender Guitars & Basses
Peavey Amps & Sound Equipment
Dan Chroninger
Posts: 361
Joined: 31 Mar 2003 1:01 am
Location: Blackriver Falls, Wisconson, USA

Post by Dan Chroninger »

You are so right there Mr.ShoBud
Chris Altmann
Posts: 4
Joined: 10 Sep 2018 6:13 am
Location: Ontario, Canada

Post by Chris Altmann »

Hi Dan, that's one nice looking steel! Can you tell me how much it weighs in the case and do you know what type of George Ls pickups? Sorry to hear about the owner, I'm sure they hate to see it go.
David Halverson
Posts: 25
Joined: 27 Apr 2013 7:12 pm
Location: Texas, USA

shobud pro 11

Post by David Halverson »

would you show pics of end plates and undercarriage also what about the case
Dan Chroninger
Posts: 361
Joined: 31 Mar 2003 1:01 am
Location: Blackriver Falls, Wisconson, USA

Post by Dan Chroninger »

Will Post Tomorrow(Sunday)
User avatar
Sandro Rocco
Posts: 156
Joined: 7 Feb 2012 8:52 am
Location: St. Catharines, Ontario, Canada

Post by Sandro Rocco »

How is the copedent setup?
Dan Chroninger
Posts: 361
Joined: 31 Mar 2003 1:01 am
Location: Blackriver Falls, Wisconson, USA

Post by Dan Chroninger »

Emmons on the Floor.Franklin on knee's. I will reset to buyers likes
Dan Chroninger
Posts: 361
Joined: 31 Mar 2003 1:01 am
Location: Blackriver Falls, Wisconson, USA

Post by Dan Chroninger »

SOLD
User avatar
J R Rose
Posts: 2718
Joined: 13 Mar 2009 12:39 pm
Location: Keota, Oklahoma, USA

Post by J R Rose »

Dan, I see you have sold this guitar but do you know the serial number? Or can you put me in contact with the person who brought it by P.M. Thanks ever so much, J.R. Rose
Black Performance SD-10, 2002. Peavey LTD 400 with 15" Eminence EPS 15-C, Sho-Bud Seat, Goodrich L-120 Pedal, Sho-Bud Bar, Picks, Cords. Nothing else.
Locked