Realband for recording question

Michell Geerdink · Post by **Michell Geerdink** » 3 Aug 2018 6:22 am

Hi,
Is it possible to bring backing tracks, created in biab to realband, then play and record a pedalsteel part over it?

I have a Fender Super Champ x2 that has the option to hooke up with a laptop through usb and make digital recordings.

Thanks,
Michell

Norman Evans · Post by **Norman Evans** » 3 Aug 2018 2:19 pm

You should be able to.
https://www.youtube.com/watch?v=JfqCxQ0ZzsA

Michell Geerdink · Post by **Michell Geerdink** » 5 Aug 2018 9:08 am

Hi Norman,

Thanks for the tip.
I watched the video and tried to follow the steps as advised but still no luck.

This is what i did:

1 i connected the amp with the laptop
2 i opened realband and went to audio settings
3 then to recording devices where i found 'SuperChamp
x2 amp' as internal AUX-PLUG.

But then it ends, i have signal from the amp but nothing through my headphones.

I will look for videos on this but tips are welcome.

Thanks,
Michell

Michell Geerdink · Post by **Michell Geerdink** » 5 Aug 2018 9:45 am

When i push the record button i get a popup saying 'no midi input driver is installed in Realband'

This is a problem right? Which midi input driver should i install?

Norman Evans · Post by **Norman Evans** » 6 Aug 2018 12:01 pm

I don't know which midi driver you need to install. You will probably have to go back into your sound control panel and reset the output for the sound to come through your headphones. At about 1:38 of this video, it explains how to set the sound for the headphones.
https://www.youtube.com/watch?v=JfqCxQ0ZzsA