Cowboy Eddie Long Equipment + Tone

About Steel Guitarists and their Music

Moderator: Shoshanah Marohn

Post Reply
Cameron Fulp
Posts: 168
Joined: 28 May 2018 8:01 am
Location: Lindale Texas, USA

Cowboy Eddie Long Equipment + Tone

Post by Cameron Fulp »

Good morning Steelers, as being someone who is very new to the forum, I have tried to research past topics revolving Cowboy Eddie long. For the last several years I have been studying his work all the way from his early days with Hank Williams Junior, sessions he has done,and any and all live recording (video).
I am only a hair away from placing my order with BMI, to get into his tuning.
I have seen several performances where he is playing out of a fender deluxe reverb, and he has what seems to be only one effects pedal, which is orange. They’re in the picture below I tried to get as close up of a picture as I could find. Does anyone know about this particular Effects pedal? What it does? And any settings on it?

If anyone has studied him, you know that his teacher and mentor was the late great Julian Tharpe, myself only being 23 years of age he was a little before my time but I took the time to track down and study all of his records. Wow, what a stylist, and monster picker. Cowboy has a tone that is so extremely similar to Julian‘s, and from what I have noticed he gets it out of that fender amp, and the effects pedal. Any advice or comments would be appreciated .
Image
User avatar
Jon Jaffe
Posts: 915
Joined: 15 Nov 2004 1:01 am
Location: Austin, Texas

Still for sale?

Post by Jon Jaffe »

User avatar
Jerry Overstreet
Posts: 12622
Joined: 11 Jul 2000 12:01 am
Location: Louisville Ky

Post by Jerry Overstreet »

Don't know about the effects box. I can't see enough of it to tell. Bill Ferguson and Eddie go way back, perhaps he has more overall information for you.

In years past, I've seen him play Fender and Fender clone tube amps, Mesa Boogies and Classic Vibe too. For years, he played the stereo Paico amp system which I really know nothing about nor anything else concerning his electronics.

There used to be a copedent listed at BMI steel site, but I can't see it now.

I was fortunate to see him at the St. Louis ISGC back in the early 00's. Great playing and tone, fast as greased lightning.
Cameron Fulp
Posts: 168
Joined: 28 May 2018 8:01 am
Location: Lindale Texas, USA

Post by Cameron Fulp »

Thank you Jerry for that information, I actually was able to find out that the pedal Is a “Wampler Hotwire” designed by Brent Mason.
User avatar
Lee Baucum
Posts: 10326
Joined: 11 Apr 1999 12:01 am
Location: McAllen, Texas (Extreme South) The Final Frontier

Post by Lee Baucum »

His copedant can be found on this page--->Click Here
Lee, from South Texas - Down On The Rio Grande

There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.


Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat
User avatar
Glenn Demichele
Posts: 661
Joined: 11 Oct 2012 8:55 am
Location: (20mi N of) Chicago Illinois, USA

Post by Glenn Demichele »

Did I just see that his bmi was for sale?
Franklin D10 8&5, Excel D10 8&5, homemade buffer/overdrive, Moyo pedal, GT-001 effects, 2x BAM200 for stereo. 2x GW8003 8" driver in homemade closed-box. Also NV400 etc. etc...
George Kimery
Posts: 3691
Joined: 23 Feb 2002 1:01 am
Location: Limestone, TN, USA

Cowboy eddi long

Post by George Kimery »

You must be aware that he is on a promo video for Classic Vibe amps. Great picking and endorsement.
User avatar
Bill Ferguson
Posts: 5692
Joined: 4 Aug 1998 11:00 pm
Location: Milton, FL USA
Contact:

Post by Bill Ferguson »

Hey Cameron,

Yep Eddie and I go WAY back to even before the Hank Jr days.
A lot of water has run under the bridge in Eddie's career, but he is picking better than ever these days.
He can burn it up or raise the hair on your arms.

If you don't have his album from many years back, drop me an email and I will see that you get one. I have them in stock.
$15 shipped CONUS

If you have any questions, also let me know and I will try and get you answers.

bferguson1947@gmail.com
AUTHORIZED George L's, Goodrich, Telonics and Peavey Dealer: I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables, Goodrich Baby Bloomer and Peavey Nashville 112. Can't get much sweeter.
Mark Heims
Posts: 8
Joined: 16 Jun 2020 8:34 pm
Location: California, USA

Tabs

Post by Mark Heims »

I just got hired into a country band that does a lot of Hank Junior songs so I have been trying to study a lot of cowboy 80s stuff. Does anybody know where I can find some Hank Jr tabs?
User avatar
Jim Cooley
Posts: 1754
Joined: 23 Apr 2010 9:12 am
Location: The 'Ville, Texas, USA

Post by Jim Cooley »

Mark Heims
Posts: 8
Joined: 16 Jun 2020 8:34 pm
Location: California, USA

Tabs

Post by Mark Heims »

I just got hired into a country band that does a lot of Hank Junior songs so I have been trying to study a lot of cowboy 80s stuff. Does anybody know where I can find some Hank Jr tabs?
Austin Tripp
Posts: 818
Joined: 10 Aug 2008 3:03 pm
Location: Nashville TN

Post by Austin Tripp »

Cowboy has been my mentor for several years now. He actually is the one (along with Robby Turner) who persuaded me to go on the road full time! I've played his tuning for 6 years now and if you do go with it, you won't be disappointed.


Most of Cowboys studio work is done with his 65 Fender Twin with 2 JBL speakers. Along with an older style Hotwired pedal. Most of the time, he leaves the Hotwired on for a "fuzz". But he also uses it for heavy distortion. Cowboy favors an old Goodrich 120 volume pedal, but he may have switched to a Telonics recently, im not sure. His stage rig is massive. He uses his twin, along with 2 2500 Crown power amps, with a Lexicon MX400, and a Presonus studio preamp. Into 2 Weber 12 inch speakers and 2 Weber 10 inch speakers that he uses for monitors. He also uses the Hotwired pedal live. He uses Powerboost Pickups in both of his BMIs that really compliments his sound. Thats about the rundown of it. I see this is a 2 year old post but maybe this will help someone in the future!
"Hotrod"
Steel guitarist for Cody Jinks
Member CMA
Post Reply