Question about the D'Addario NYXL strings

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Billy Murdoch
Posts: 2161
Joined: 14 Feb 2004 1:01 am
Location: Glasgow, Scotland, U.K.

Post by Billy Murdoch »

With regard to the solderless cable kit,I have done a few internet searches and find that Planet Waves have sets which (upon closer inspection)are D'Addario on the package, Are Planet Waves and D'addario the same company.
Best regards
Billy
User avatar
Tom Spaulding
Posts: 148
Joined: 13 Aug 2014 8:19 am
Location: Tennessee, USA
Contact:

Post by Tom Spaulding »

Billy Murdoch wrote:With regard to the solderless cable kit,I have done a few internet searches and find that Planet Waves have sets which (upon closer inspection)are D'Addario on the package, Are Planet Waves and D'addario the same company.
Best regards
Billy


Yes, same company, currently transitioning name to “D’Addario”.
Billy Murdoch
Posts: 2161
Joined: 14 Feb 2004 1:01 am
Location: Glasgow, Scotland, U.K.

Post by Billy Murdoch »

Thanks Tom
Billy
User avatar
Bill Ford
Posts: 3836
Joined: 13 Dec 1999 1:01 am
Location: Graniteville SC Aiken

Post by Bill Ford »

After trying the regular D'addario set on my gigging guitar (S12 ext E9) I replaced an almost new set of GLs on my practice guitar with the D'addario, goodby GLs.

BF
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!!
Kyd Brenner
Posts: 42
Joined: 16 Jan 1999 1:01 am
Location: Washington, DC/Harman WV

Post by Kyd Brenner »

Let's see, if these last Franklin two weeks I'll probably get three months out of them!
Bill Miller
Posts: 1438
Joined: 19 Mar 2003 1:01 am
Location: Gaspe, Quebec, Canada
Contact:

Post by Bill Miller »

Hmm...it's looking like I should probably re-think this one a bit. It can't be taken lightly that both Travis and Paul are swung over so strongly to the NYXL strings. Not that I was discounting everyone else's testimonials, it's just that the packaging raises my hackles. Guess I'll have to try them out at some point though.
User avatar
b0b
Posts: 29108
Joined: 4 Aug 1998 11:00 pm
Location: Cloverdale, CA, USA
Contact:

Post by b0b »

For what it's worth, I prefer the new "Nitro-pack" GHS packaging, with each string individually sealed in nitrogen. I use singles instead of sets because I have an unusual tuning. D'Addario seals the NYXL sets, but not the NYXL singles.
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
User avatar
b0b
Posts: 29108
Joined: 4 Aug 1998 11:00 pm
Location: Cloverdale, CA, USA
Contact:

Post by b0b »

Billy Murdoch wrote:With regard to the solderless cable kit,I have done a few internet searches and find that Planet Waves have sets which (upon closer inspection)are D'Addario on the package, Are Planet Waves and D'addario the same company.
Best regards
Billy
I believe so. The Planet Waves products are in D'Addario's catalog. I think that Planet Waves is a brand name that D'Addario owns, like Gretsch and the the Sho~Bud brand.
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
User avatar
Travis Toy
Posts: 571
Joined: 29 Apr 2005 12:01 am
Location: Nashville, TN, USA
Contact:

Post by Travis Toy »

Bill Miller wrote:Hmm...it's looking like I should probably re-think this one a bit. It can't be taken lightly that both Travis and Paul are swung over so strongly to the NYXL strings. Not that I was discounting everyone else's testimonials, it's just that the packaging raises my hackles. Guess I'll have to try them out at some point though.
I really think you’ll be happy you tried them. You saw Paul’s testimony about their longevity. I am experiencing the same thing. I typically change my strings as soon as crystal clear harmonics start getting more difficult to achieve. There comes a certain point in string life where I can tell that they’ve peaked and are heading downhill. Honestly, I just changed a set on my new MSA that had been on there for WEEKS, and they still weren’t dead yet. I know a lot of guys have sets on for months at a time, and think it’s crazy that Paul or myself might change our strings weekly/bi weekly...but we’re likely putting in considerably more hours on a set in a shorter amount of time than the average player. If I only do 1 session a day, that’s 3 hours of playing. 2 sessions would be 6 hours. If I did 2 sessions and a gig that evening, that might be 10 hours in 1 day. When you start doing that every day, strings wear out quickly. I can 100% say that I’ve never played strings that last and stay true as long as these do. Half the time I’m changing them, just because I feel like I should be changing them, not even because they’re dead yet.

-t
User avatar
Greg Cutshaw
Posts: 6610
Joined: 17 Nov 1998 1:01 am
Location: Corry, PA, USA
Contact:

Post by Greg Cutshaw »

I put on two sets of NYXL's on my two telecasters and they sound great. Also put a set on my 12 string E9/C6 Excel and they seem fine but can't comment yet on the longevity. I agree with others that I would prefer them to be in individual packages. I didn't have any trouble handling the color codes but considering the premium price, the whole experience would feel more premium if they were in individual packages. and I wouldn't have to separate and identify them.
User avatar
Bill Lowe
Posts: 2051
Joined: 25 Apr 2007 10:36 am
Location: Connecticut

Post by Bill Lowe »

I tried a set on my Emmons bolt on. They sound great. Tuned up nice.I really like them so far. The color coded ball ends were not an issue. Tom, thanks again...........Bill
Last edited by Bill Lowe on 14 Apr 2018 6:10 am, edited 3 times in total.
JCH D10, 71 D10 P/p fat back, Telonics TCA 500C--12-,Fender JBL Twin, Josh Swift signature.
Ronald Moore
Posts: 140
Joined: 1 Jul 2003 12:01 am
Location: Mindoro, Wisconsin, USA

Post by Ronald Moore »

Jeff Newman's advice for 12 string Universal players: If you can't get a 12 string set, get a C6th set and get a .013 and a .015 for the top two strings. I don't know if there is a price advantage or not, but the gauges work out very close giving you a .012 for the third string. Check it out.
User avatar
Chris Schlotzhauer
Posts: 2204
Joined: 11 Jan 1999 1:01 am
Location: Colleyville, Tx. USA

Post by Chris Schlotzhauer »

Why do they only sell you 4 singles strings maximum?
User avatar
b0b
Posts: 29108
Joined: 4 Aug 1998 11:00 pm
Location: Cloverdale, CA, USA
Contact:

Post by b0b »

Chris,

Inventory balancing. I found that I can't keep fresh strings in stock if I allow people to buy unlimited quantities. I order about once a month. It takes a week or more to get a shipment. I hate it when something is out of stock, and there's no way to predict which strings will suddenly be gobbled up by one customer if I don't limit the quantity.

Besides, especially with these NYXL singles which are not in sealed packages, you shouldn't buy a year's supply at once.
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
Charley Hill
Posts: 805
Joined: 18 Oct 2002 12:01 am
Location: The Dirty South
Contact:

Post by Charley Hill »

Bill Ferguson wrote:Just to clarify.

I like these strings, but they would seem to be way more expensive buying individual guages.

And for the record, George L's Stainless Strings are still available.
I get all giggly when Bill gets clear..... :D :lol: :lol:

They are the best sounding strings ive ever played. Really enjoyed the feedback I get from them when I play.
Traveler, Peddler and Extreme life lover. Giving up is not an option.
User avatar
Jack Stoner
Posts: 22087
Joined: 3 Dec 1999 1:01 am
Location: Kansas City, MO

Post by Jack Stoner »

As in my thread about the NYXL's, I'm a "convertee".
GFI Ultra Keyless S-10 with pad (Black of course) TB202 amp, Hilton VP, Steelers Choice sidekick seat, SIT Strings (all for sale as package)
Cakewalk by Bandlab and Studio One V4.6 pro DAWs, MOTU Ultralite MK5 recording interface unit
User avatar
Paddy Long
Posts: 5462
Joined: 19 Aug 2003 12:01 am
Location: Christchurch, New Zealand

Post by Paddy Long »

Been using them for 3 or 4 months myself and so far I like them (not the same set for the 4 months though hehe) ... nice full bodied tone, and durability without losing their sparkle - so far so good!
14'Zumsteel Hybrid D10 9+9
08'Zumsteel Hybrid D10 9+9
94' Franklin Stereo D10 9+8
Telonics, Peterson, Steelers Choice, Benado, Lexicon, Red Dirt Cases.
User avatar
Fred Treece
Posts: 3920
Joined: 29 Dec 2015 3:15 pm
Location: California, USA

Post by Fred Treece »

The gauges of a standard set of NYXL’s all match the set I have currently on my Stage One, except string 6.

Quote from the tuning instructions that came with my guitar:
“Use of a .022 WOUND is HIGHLY recommended for string six as it helps the overall sound and playability of the guitar.”

The NYXL string six is .020P. I guess I could try it and see what happens...
User avatar
b0b
Posts: 29108
Joined: 4 Aug 1998 11:00 pm
Location: Cloverdale, CA, USA
Contact:

Post by b0b »

Fred Treece wrote:The gauges of a standard set of NYXL’s all match the set I have currently on my Stage One, except string 6.

Quote from the tuning instructions that came with my guitar:
“Use of a .022 WOUND is HIGHLY recommended for string six as it helps the overall sound and playability of the guitar.”

The NYXL string six is .020P. I guess I could try it and see what happens...
You will need to retune the pedal, at least. You might need to move the 6th string rod on your B pedal to a different slot. Or you could just buy a .022w. www.steelguitarshopper.com/daddario-nyx ... kel-wound/
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
User avatar
Fred Treece
Posts: 3920
Joined: 29 Dec 2015 3:15 pm
Location: California, USA

Post by Fred Treece »

Thanks, b0b.
Tommy Boswell
Posts: 1061
Joined: 4 Jan 2008 1:59 pm
Location: Virginia, USA

Post by Tommy Boswell »

I'm another convert. NYXLs are the best I've tried. Worth the extra money, and the packaging doesn't bother me.
Len Amaral
Posts: 4818
Joined: 4 Aug 1998 11:00 pm
Location: Rehoboth,MA 02769

Post by Len Amaral »

For U-12 players using the NYXL C6 set. Start with the 12th string and work your way down to the the 3rd string. You can get the NYXL .012 and .015 singles for the first and second. A friend that works in a music store gave me a set. Nice vibe.....
User avatar
Dale Rottacker
Posts: 3513
Joined: 3 Aug 2010 6:49 pm
Location: Walla Walla Washington, USA
Contact:

Post by Dale Rottacker »

My opinion means Squat, but I agree with all the positive statements made here as they’re my experience as well... Besides that, how else do you get this back to the Front Page? :?
Dale Rottacker, Steelinatune™
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
User avatar
MIchael Bean
Posts: 255
Joined: 17 May 2013 10:50 am
Location: North Of Boston
Contact:

Post by MIchael Bean »

The D'Addario color coating is pretty logical and effortless, once you get into it. Once you have a set on there, you just put back the same color that you took off . It's worth doing it for the quality and tone of their strings.

Ronald & Len, that's a good idea about using the C6 set on the U12, and then adding the high strings. I've been adding low strings to an E9 set and discarding the D. That's got me thinking...

Tom Spaulding, nice to see you here on the Forum!

MB
Landon Johnson
Posts: 249
Joined: 3 Aug 2007 2:36 pm
Location: Washington, USA

Roy G. Biv

Post by Landon Johnson »

What about him? Coulda used the natural order of colors in the spectrum like the resistor color code.,BBROYGBVGW
Post Reply