Tuning peg winders available

Jim Pitman · Post by **Jim Pitman** » 14 Mar 2018 12:33 pm

So I made up a new batch of tuning peg winders. Delrin and brass and a novel way of achieving the pivot makes these indistructable. They will last many lifetimes.
Kinda expensive but hand made in the USA. $35.00 includes 1st class shipping.
See my perevious post for pictures and details:
https://bb.steelguitarforum.com/viewtop ... ght=winder

Jim Pitman · Post by **Jim Pitman** » 14 Mar 2018 12:34 pm

PM me if ineterested.

Stu Schulman · Post by **Stu Schulman** » 15 Mar 2018 12:13 am

I have a few of these,and they are awesome,In fact I'm getting ready to give one to a friend of mine as a gift,I always have one on the keyhead of my pedal steel guitar...Never seen anything else that works this well.

Art Beard · Post by **Art Beard** » 15 Mar 2018 4:26 am

Jim , please send address so I can get one. I play mostly old pedal steels, 1969 ZB D11/10, 1973 sho-Bud D10 Professional, 1975 Speedy West S10, along w/ Gretsch 6120, Beard Gold Tone , Tennessee 12 string Bass n a 3 string shovel.
Which size would be best?
Thanks. CAA

Jim Pitman · Post by **Jim Pitman** » 20 Mar 2018 10:57 am

Got a few left.

Art Beard · Post by **Art Beard** » 20 Mar 2018 2:42 pm

Keep one 4 me, medical problems kept me from PO. BE IN THE MAIL BY TOMORROW. THANKS JIM.
HAPPY TRAILS. CAA

Rick Rian · Post by **Rick Rian** » 20 Mar 2018 5:10 pm

Jim, do you take PayPal?

Jim Pitman · Post by **Jim Pitman** » 21 Mar 2018 2:15 am

No problem Art. One is on its' way.

Rick, PM me your e-mail address and I'll send you a Paypal request.

Jim Pitman · Post by **Jim Pitman** » 21 Mar 2018 2:25 am

Folks,

When you PM me, state if you prefer to use Paypal or send me a check.

Paypal - State your e-mail address so I can send you a $ request, and state your physical addresss.

Check - State only your physical address. I'll reply with mine.

The standard "small" winder fits 99% of the PSG's including the butterfly Klusons like you find on an Emmons. I can provide the next size up but I don't stock them so there may be a wait.

The standard fits a key up to 0.625" across the widest point.

Rick Rian · Post by **Rick Rian** » 21 Mar 2018 4:31 pm

I got mine in the mail today - wow! VERY well made, I'm looking forward to many hours of cranking with this beauty. Seriously, thank you Jim! (two thumbs up)

Damir Besic · Post by **Damir Besic** » 22 Mar 2018 6:39 pm

those look great...PM sent

Jim Pitman · Post by **Jim Pitman** » 23 Mar 2018 7:44 am

Thanks Rick and Damir.

I'll be making more up this weekend. Keep it coming.

Jim Pitman · Post by **Jim Pitman** » 26 Mar 2018 4:29 am

I made some over the weekend.
If folks are interested PM me the address you use for Paypal and state your mailing address. I can ususally get them out the same day.

Hal Braun · Post by **Hal Braun** » 26 Mar 2018 11:25 am

Jim

Got the winder quickly.. thanks! Itâ€™s a beauty, and now I have a solid handcrafted work of art instead of a flimsy plastic POS.. anyone that is interested should pick one of these beauties up..

Pete Bailey · Post by **Pete Bailey** » 26 Mar 2018 12:40 pm

I also just received my winder in the mail. Classy good looks and great ergonomics too.

Thanks for making these available again Jim!

DeWayne Lanier · Post by **DeWayne Lanier** » 26 Mar 2018 2:15 pm

I received mine today.
These are so nice!
Jim's hand made winders are a fine example of quality craftsmanship.
Ya'll gotta get one.

Jim Pitman · Post by **Jim Pitman** » 27 Mar 2018 2:15 pm

Thanks guys - Crank away!

David Ball · Post by **David Ball** » 27 Mar 2018 4:07 pm

Will the standard size winder fit a full size Grover Rotomatic button?

Thanks,
Dave

Jim Pitman · Post by **Jim Pitman** » 27 Mar 2018 5:59 pm

Not sure Dave. I have three sizes. The slot in the winder is a pair of semicircles on each end connected by a pair of straight lines. The width of the slot is always 0.375 inches. In other words a 0.375" round end mill scribes the slot in a straight line. The The widest dimension of the slot is as follows: small = 0.75", medium = 0.875", large is 1". Measure the extreme width and i'll send you the correct winder.

Damir Besic · Post by **Damir Besic** » 31 Mar 2018 6:05 pm

just received Jimâ€™s string winder, my plastic one broke so I ordered one from Jim...as soon as you pick this little string winder up, you can feel the quality, Jimâ€™s winder is solid, heavy, smooth, and feels great in hand, and works great... unlike the cheap plastic winders that break all the time, the Jimâ€™s winder is a handmade high quality product that looks and feels like it will last a long long time... if you donâ€™t have one already, do yourself a favor and get you one...

Richard Stoops · Post by **Richard Stoops** » 5 Apr 2018 4:13 am

Got mine yesterday and am impressed by the quality and smoothness. Well built, looks like it should last forever.
Dick

memphislim · Post by **memphislim** » 5 Apr 2018 7:42 am

Jim, would you consider maker a winder for us keyless owners? A winder with a ball head allen wrench would certainly save us tons of time.

Jim Pitman · Post by **Jim Pitman** » 6 Apr 2018 11:09 am

I PM'd you Memphislim.

memphislim · Post by **memphislim** » 6 Apr 2018 2:39 pm

I did not get the PM Jim so I sent you one.

Jim Pitman · Post by **Jim Pitman** » 6 Apr 2018 3:34 pm

I PMed you again. if you don't get it this time, I'll try your e-mail. Let me know.

The Steel Guitar Forum

Tuning peg winders available

Tuning peg winders available

Tuning winders

Tuning winders

Peg Winders

tuning peg winder