Mullen Parts

Mickey Adams · Post by **Mickey Adams** » 22 Jan 2018 8:33 am

I have massive stores of Mullen parts...
Please let me know own what you need..!

Paul Brainard · Post by **Paul Brainard** » 22 Jan 2018 11:26 am

Hey Mickey do you have any of their VKL extenders? And, do you think they can be made to work on a Fessenden? Looks like they might, similar design although the thickness of the "blade" sandwiched inside the joint looks different. . .thanks!

ps you don't happen to have any spare Williams knee levers do you? Just the lever. . .

Mickey Adams · Post by **Mickey Adams** » 22 Jan 2018 11:55 am

Thats one part I do not have sorry..

Donald Wright · Post by **Donald Wright** » 22 Jan 2018 1:16 pm

Hey Mickey,
I have two D10 Mullen, one 1989 PRP and one 2013 RP.
I would like to add a center knee lever for the C6 neck on one or both guitars. I would need the knee lever, cross shaft with bushings, bell crank and pull rod. I think the cross shaft and the corresponding bell crank on the 2013 RP is a larger diameter than the PRP. I have a few extra pull rods if you don't.
Let me know.

Thanks,
Don

Jason Putnam · Post by **Jason Putnam** » 22 Jan 2018 5:32 pm

Half stop mechanism????

Jerry Roller · Post by **Jerry Roller** » 22 Jan 2018 8:59 pm

Edited.

Jon Light · Post by **Jon Light** » 23 Jan 2018 4:34 am

Paul Brainard wrote:.......VKL extenders? And, do you think they can be made to work on a Fessenden?..........

This design is great. I asked Mullen this exact question a couple of years ago and....no. Will not fit a Fess.

Tom Mooney · Post by **Tom Mooney** » 25 Jan 2018 4:13 am

Do you have the stuff to add a 4th floor pedal to my Royal Precision?

Wilfred Buttigieg · Post by **Wilfred Buttigieg** » 26 Jan 2018 12:58 am

I am also interested in adding a fourth pedal to my Royal Precision.
Do you have the necessary parts please?

Lee Bartram · Post by **Lee Bartram** » 1 Mar 2018 4:10 am

Mickey I sent you a PM..

DG Whitley · Post by **DG Whitley** » 1 Mar 2018 6:32 am

As Jason mentioned, any half stop assemblies?

Alan Michael · Post by **Alan Michael** » 13 Mar 2018 9:03 am

PM sent. Looking for a Mullen narrow mount pickup.

Steven Meister · Post by **Steven Meister** » 20 Oct 2018 8:26 pm

PM sent

Mickey Adams · Post by **Mickey Adams** » 22 Oct 2018 10:54 pm

Ill check stock for all of these today..
NO RP parts....I didn't service many at all...

The Steel Guitar Forum

Mullen Parts

Mullen Parts

parts

Mullen parts

Re: parts

Parts

Parts for Royal Precision