The Steel Guitar Forum

Dave Zirbel · Post by **Dave Zirbel** » 21 Jun 2005 12:05 pm

You'll find it in this thread.
http://steelguitarforum.com/Forum5/HTML/009240.html

DZ[This message was edited by Dave Zirbel on 21 June 2005 at 01:05 PM.]

John Schjolberg · Post by **John Schjolberg** » 21 Jun 2005 12:09 pm

Yikes.

Skip Edwards · Post by **Skip Edwards** » 21 Jun 2005 10:58 pm

Now that's funny....

First John asks about Pete's tuning, then gets a link that shows Sneakey's copedant, and comes back with just one word..."Yikes".

I dunno, it just tickled me to see those 3 posts like that....

John Daugherty · Post by **John Daugherty** » 22 Jun 2005 5:30 am

Skip, if you ever worked with Pete and watched him use that guitar you might say more than "Yikes". Pete is different and also and outstanding talent. Pete and I worked together for a while when we were young. I thought at the time that I knew a lot about a guitar. Pete could scare the daylights out of you.

Russ Tkac · Post by **Russ Tkac** » 22 Jun 2005 6:07 am

I just bought tickets to see Pete with Burrito Deluxe on July 8th. This will be the first time for me. I may add a few word to "Yikes"...If you know what I mean.

Russ

ed packard · Post by **ed packard** » 22 Jun 2005 6:54 am

I had the pleasure of getting S Pete & Bobby Black together for a lunch etc. in the San Jose area ... they had not met. That was an interesting time.

The front lip of Pete's fender is loaded with holes and slots where he has/had installed pots and sliders and ? to control his sounds. Last time I saw him, they were mostly empty. He set up with a bunch of effects strung together on the floor, turned his instrument case up on edge to use as a seat (great balance) and went from there.

David Doggett · Post by **David Doggett** » 22 Jun 2005 8:19 am

Sneaky Pete's tuning (see above link) is merely a B6 tuning. If it is transposed to C6, the open string tuning looks fairly familiar. However, almost none of his changes resemble typical C6 neck changes. His pedals more resemble E9 changes. Pedals 1 and 2 are simply the Day setup. Some of the other changes are common on E9 setups. To facilitate seeing this easier, I first transposed his B6 tuning to C6, and also show a typical E9 tuning transposed to C9. Finally, I transposed his tuning to E6 for those use to looking at E copedants.

Sneaky Pete Klenow's B6
<pre>
LK 1 2 3 4 5 6 7 8 9 RK
1 D# C# E D
2 B Bb C# Bb C#
3 G# A G
4 F# G# F A
5 D# E D
6 B C#
7 G# A G
8 F#</pre>

Transposed to C6
<pre> LK 1 2 3 4 5 6 7 8 9 RK
1 E D F Eb
2 C B D B D
3 A Bb G#
4 G A F# Bb
5 E F Eb
6 C D
7 A Bb G#
8 G

</pre>

Carter E9 standard transposed to C9
<pre> LKL LKV LKR P1 P2 P3 RKL RKR
1 D Eb
2 B Bb, A
3 E F
4 C C# B D
5 G F# A A
6 E F D
7 D
8 C C# B
9 Bb A
10 G F# A
</pre>

Pete's B6 transposed to E6
<pre> LK 1 2 3 4 5 6 7 8 9 RK
1 G# F# A G
2 E D# F# D# F#
3 C# D C
4 B C# Bb D
5 G# A G
6 E F#
7 C# D C
8 B
</pre>

Pedal 3 raises the 6th to give a 7th chord.
Pedal 4 gives a major 7th.
Pedal 5 lowers the 5th to give a flatted 5th.
Pedal 6 lowers the 3rds to give flatted thirds or the tonic as a minor.
Pedal 7 and the RK give a 9th.
Pedal 8 gives a major 7 9th (is that what that is called?).
Pedal 9 lowers the 6th a half step - not sure what that is good for.

So except for pedal 9, it is all very sensible and useful. [This message was edited by David Doggett on 22 June 2005 at 10:10 AM.]

John Poston · Post by **John Poston** » 22 Jun 2005 8:21 am

Yikes.

David Doggett · Post by **David Doggett** » 22 Jun 2005 8:24 am

I apologize for making this thread run past the borders. Nevermind - I fixed it. I had the text titles of each table within the tabbed table, which works in Excel (the text just runs over the blank adjacent cells); however, in HTML tab the text pushes the whole row to the right, even though most of it is blank, and this causes everything in the thread to be extended past the border.[This message was edited by David Doggett on 22 June 2005 at 09:47 AM.]

--

--