Earthquaker Dispatch Master Delay/Reverb users?

Steel guitar amplifiers, effects, etc.

Moderator: Shoshanah Marohn

Post Reply
Bart Maloney
Posts: 358
Joined: 22 Jun 2004 12:01 am
Location: Houston, Texas

Earthquaker Dispatch Master Delay/Reverb users?

Post by Bart Maloney »

Anyone here use the Dispatch Master for pedal steel? I just picked one up and am really liking how it has a reverb and Delay together. Just curious if anyone else is using one.
User avatar
Brad Sarno
Posts: 4916
Joined: 18 Dec 2000 1:01 am
Location: St. Louis, MO USA
Contact:

Post by Brad Sarno »

It's what I've used most of the time for the past couple of years. It's a big reverb and delay effect, and so lush.

B
User avatar
Tom Wolverton
Posts: 2874
Joined: 8 May 2008 3:52 pm
Location: Carpinteria, CA

Post by Tom Wolverton »

It is my main gigging reverb/delay pedal. Works great. A small package.
To write with a broken pencil is pointless.
Drew Pierce
Posts: 380
Joined: 15 May 2013 9:46 am
Location: Arkansas, USA

Post by Drew Pierce »

It's a great pedal. Especially if your amp's onboard reverb doesn't quite deliver the sound you're after. I used a Boss RV-3 for years with my Evans FET 500 LV and its spring reverb paired well with the RV-3's digital programs to make a great overall sound. The Dispatch Master was a noticeable improvement over the RV-3, providing a bigger, lusher sound.

However, when I replaced the FET 500 with my current Evans, an RE500, I found that the RE500's digital reverb didn't blend nearly as well with the DM's digital reverb. There was a certain amount of dissonance between the two reverbs that I couldn't adjust out now matter how I tried. I got a much cleaner, more open sound using just the RE500's reverb (which is infinitely adjustable) and the DM providing delay only.
Drew Pierce
Emmons D10 Fatback, S10 bolt-on, Zum D10, Evans RE500, Hilton volume and delay pedals.
User avatar
Dennis Detweiler
Posts: 3488
Joined: 8 Dec 1998 1:01 am
Location: Solon, Iowa, US

Post by Dennis Detweiler »

I've been using the TC Electronic m350 in my rack gear, which give me complete programmable control with personal preset capabilities. The M350 is in my rack case with a Revelation and Carvin HT400. My other setup is two stomp boxes, MXR analog Carbon Copy delay in front of a Digital TC Electronic Hall Of Fame reverb. I'm sold on both. However, I never tried the Dispatch Master.
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Boss 59 Fender pedal for preamp, NDR-5 Atlantic Delay & Reverb, two Quilter 201 amps, 2- 12" Eminence EPS-12C speakers, ShoBud Pedal, 1949 Epiphone D-8. Revelation preamp into a Crown XLS 1002 power amp.
Brett Lanier
Posts: 1759
Joined: 9 Sep 2009 3:47 pm
Location: Madison, TN

Post by Brett Lanier »

This one looks pretty good too.
https://www.youtube.com/watch?v=uDP9iFREOfU
David Gertschen
Posts: 260
Joined: 23 May 2013 12:16 pm
Location: Phoenix, Arizona

Post by David Gertschen »

I recently bought the Dispatch Master. I was looking for reverb & delay in one pedal. "Big and lush" is an understatement; unless you want Grand Canyon style reverb all the time. I sent it back. I prefer more of the classic Fender reverb sound, and just could not dial it in with that one.
Drew Pierce
Posts: 380
Joined: 15 May 2013 9:46 am
Location: Arkansas, USA

Post by Drew Pierce »

David Gertschen wrote:I recently bought the Dispatch Master. I was looking for reverb & delay in one pedal. "Big and lush" is an understatement; unless you want Grand Canyon style reverb all the time. I sent it back. I prefer more of the classic Fender reverb sound, and just could not dial it in with that one.
I don't understand the observation that the DM produces "Grand Canyon style reverb all the time". It has a mix adjustment that can be dialed to no reverb at all.
Drew Pierce
Emmons D10 Fatback, S10 bolt-on, Zum D10, Evans RE500, Hilton volume and delay pedals.
David Gertschen
Posts: 260
Joined: 23 May 2013 12:16 pm
Location: Phoenix, Arizona

Post by David Gertschen »

Well Drew, maybe my pedal was defective. It went from "no reverb at all" to "bottom of the well" with no noticeable difference in between. All I know is, it sure wasn't what I was looking for...
User avatar
Dennis Detweiler
Posts: 3488
Joined: 8 Dec 1998 1:01 am
Location: Solon, Iowa, US

Post by Dennis Detweiler »

I'd say it was defective if you had no control over it (full off to full on with the slightest touch of any of the knobs).
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Boss 59 Fender pedal for preamp, NDR-5 Atlantic Delay & Reverb, two Quilter 201 amps, 2- 12" Eminence EPS-12C speakers, ShoBud Pedal, 1949 Epiphone D-8. Revelation preamp into a Crown XLS 1002 power amp.
Drew Pierce
Posts: 380
Joined: 15 May 2013 9:46 am
Location: Arkansas, USA

Post by Drew Pierce »

I didn't end up using the DM either. But not because it wasn't a decent pedal. I just found I didn't need any reverb beyond what was already available in my amp.
Drew Pierce
Emmons D10 Fatback, S10 bolt-on, Zum D10, Evans RE500, Hilton volume and delay pedals.
User avatar
Dennis Detweiler
Posts: 3488
Joined: 8 Dec 1998 1:01 am
Location: Solon, Iowa, US

Post by Dennis Detweiler »

What I like most about the TC Electronic M350 is the ability to control the tail of the reverb and control of the pre-delay (front of the reverb)which lets the split second initial attack of the note come through before the reverb picks it up. I can get more reverb without sounding like I'm in a well. It also has a color control (light to dark) to cut the sharpness. Studio quality.
The delay has several types of delay choices. My Preference of preset choices are Soft Delay or Studio Delay, then detail each to a preset. Some for slow songs, others for faster songs. A couple for studio tracks, allowing the engineer to add a little more.
Total control after you figure out what each control does.
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Boss 59 Fender pedal for preamp, NDR-5 Atlantic Delay & Reverb, two Quilter 201 amps, 2- 12" Eminence EPS-12C speakers, ShoBud Pedal, 1949 Epiphone D-8. Revelation preamp into a Crown XLS 1002 power amp.
Post Reply