Finger Picks

Lap steels, resonators, multi-neck consoles and acoustic steel guitars

Moderator: Brad Bechtel

User avatar
Stefan Robertson
Posts: 1846
Joined: 24 Nov 2013 9:34 am
Location: Hertfordshire, UK
Contact:

Post by Stefan Robertson »

Jack Hanson wrote:I have been using .025 Dunlops since the 1970s for three reasons:

1) By necessity, I'm a cheapskate.
2) They're available nearly everywhere, and they're inexpensive (see #1).
3) If you can play with Dunlops, you should be able to play with anything. There's a learning curve playing with picks. Nobody said it was supposed to be easy.
I am so used to my dunlops but they are seriously comfortable to a point.

Numb fingers every now and then or hangnail.

But on a plus side not only are they cheap but available everywhere.

I just bought the perfect touch picks excited to try them HOWEVER they just cost me £18 plus £3 shipping. Ridiculously expensive for two finger picks.

I bought a whole tube of Dunlop brass for £25 so I hope these are worth it.
Stefan
Bill Hatcher custom 12 string Lap Steel Guitar
E13#9/F secrets: https://thelapsteelguitarist.wordpress.com

"Give it up for The Lap Steel Guitarist"
User avatar
Don Hayes
Posts: 6
Joined: 6 Aug 2017 9:00 pm
Location: Arizona, USA

Post by Don Hayes »

I have XL hands and the only finger picks that fit are old97 XL banjo finger picks... Nationals and Dunlaps are way too small.
GFI Ultra, accordion, Pamona lap, sho-bud pro-I, sierra TW10, piano
User avatar
Jenny Thornhill Faulk
Posts: 23
Joined: 22 Aug 2006 12:01 am
Location: Tennessee, USA
Contact:

Good morning forum!

Post by Jenny Thornhill Faulk »

Thanks so much for all the kind words about Perfect Touch Picks!

For those with large hands and arthritis... please give us a call! We can help! I just fit a gentleman with extreme arthritis who could not play for 30 minutes at a time with any other pick and he is now playing as long as he wants!

We also have a Jumbo pick that I am sure can work for large hands.... I think Dad used Andre the giant as a model!

To those considering cost, as Dad said: Consider the violinist, who often pays as much or more for a bow than for a violin.
Perfect Touch Finger Picks are your ‘bow.’ You have a fine instrument, for which you’ve paid hundreds, perhaps even thousands of dollars. Our picks will bring out the absolute best in your instrument!

As important as it is to us to bring you a quality product...personal, quality (read old fashioned) customer service is the heart of our business! We don't stop until you are satisfied.

We look forward to helping you play with Superior Tone in Bare Finger Comfort!
Jenny Thornhill Faulk
Perfect Touch Finger Picks
User avatar
Bill Groner
Posts: 1234
Joined: 30 Dec 2016 8:42 am
Location: QUAKERTOWN, PA

Post by Bill Groner »

I can vouch for what Jenny said. I had a question about the picks I ordered. The Thornhills were on the road to view the eclipse. As soon as they got back home, my email was answered and an apology was made for not getting back to me sooner.........hey, everybody has a life...... I just appreciated the personal email that was sent to answer my questions! Nice people!! :D
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
User avatar
Jenny Thornhill Faulk
Posts: 23
Joined: 22 Aug 2006 12:01 am
Location: Tennessee, USA
Contact:

Post by Jenny Thornhill Faulk »

Bill Groner wrote:I can vouch for what Jenny said. I had a question about the picks I ordered. The Thornhills were on the road to view the eclipse. As soon as they got back home, my email was answered and an apology was made for not getting back to me sooner.........hey, everybody has a life...... I just appreciated the personal email that was sent to answer my questions! Nice people!! :D
Thanks Bill!

Thanks for your order and your patience! I look forward to hearing from you when you get your picks. If you need any help fitting I have been known to look at texted pictures or get on skype or any other type of video and help folks fit! (It might be a bit selfish as it helps aleviate the drudge of polishing or sanding!

Jenny ;-)
Jenny Thornhill Faulk
Perfect Touch Finger Picks
Mick Hearn
Posts: 224
Joined: 18 Nov 2015 8:32 am
Location: United Kingdom

Post by Mick Hearn »

When I first started on steel I used my finger nails just because I had been playing guitar the same way. I went from there to Eyelure womens nails to crazy glue and toilet paper and a lot of cursing when I broke a nail. Always caused a laugh when I was putting my nails on.

Eventually I went to finger picks as there was more attack in the sound. Dunlop are what I have always used starting on .015 through the range to .025 but eventually settling on .018. It takes a while to get the moulding right but once done am very comfortable with them.

Finger picks are as personal as strings so I always think it's trial and error.

Strange that in rig rundowns we hear about the steel, amp and effects that the stars use but we never hear what picks they use.
ShoBud 6139, Remington Steelmaster D8, National D8 Console x 2, George Boards Lap Steel, National New Yorker.
User avatar
Stefan Robertson
Posts: 1846
Joined: 24 Nov 2013 9:34 am
Location: Hertfordshire, UK
Contact:

Post by Stefan Robertson »

Why are perfect touch fingerpicks designed with different closing clasps.

I feel comfortable with the one that closes diagonally.

But the one that has rabbit ears not so much.

I'll review them once I test them for a longer period of time.

Like anything new there is a hump to get used to first before I can leave a true accurate review.
Stefan
Bill Hatcher custom 12 string Lap Steel Guitar
E13#9/F secrets: https://thelapsteelguitarist.wordpress.com

"Give it up for The Lap Steel Guitarist"
Andy Henriksen
Posts: 468
Joined: 27 Apr 2012 8:59 am
Location: Michigan, USA

Post by Andy Henriksen »

Stefan Robertson wrote:Why are perfect touch fingerpicks designed with different closing clasps.
I think the idea is that they don't get tangled up with each other.

This thread inspired me to order a pair, too. I'm pretty excited to try them out.
Former Member
Posts: 355
Joined: 11 Jun 2008 7:35 am

Post by Former Member »

I'm pretty sure the website explains it all.
Rabbit ears for the middle finger.
I think the different wraps is a banjo thing, where you're not rubbing metal to metal when doing rolls.
I still had to shape the tip angle.
User avatar
Terry VunCannon
Posts: 1238
Joined: 20 Nov 2003 1:01 am
Location: Greensboro, North Carolina, USA
Contact:

Post by Terry VunCannon »

Yeah, the PT finger picks fit together so metal does not meet metal when index & middle finger brush together. It does not make a clicking sound...very useful when recording acoustic in the studio.
These picks flex on your fingers, stay on great.
User avatar
Jenny Thornhill Faulk
Posts: 23
Joined: 22 Aug 2006 12:01 am
Location: Tennessee, USA
Contact:

Post by Jenny Thornhill Faulk »

Stefan Robertson wrote:Why are perfect touch fingerpicks designed with different closing clasps.

I feel comfortable with the one that closes diagonally.

But the one that has rabbit ears not so much.

I'll review them once I test them for a longer period of time.

Like anything new there is a hump to get used to first before I can leave a true accurate review.
Good afternoon Stefan!

I can understand the hesitation with the middle pick. The answers here on the thread as to the why are absolutely correct. The different wraps work together to avoid the 3 terrible Cs -- collisions, catching and coming off...
The thing that makes that middle pick work is that it sits so much farther back on the finger than most other picks. It really is an amazing feeling to know that you don't have to clamp the picks on until it hurts and the blood drains away. They stay with less pressure because of the extra length and the abraded interior.
I actually have a few customers that use the wing (rabbit ear) style on both fingers. Not quite how we envisioned them being used... but comfort and tone are the goal...So, all that to say... they stay on! Please do get in touch if you need any more info!
Jenny Thornhill Faulk
Perfect Touch Finger Picks
User avatar
Bill Groner
Posts: 1234
Joined: 30 Dec 2016 8:42 am
Location: QUAKERTOWN, PA

Post by Bill Groner »

Well Stefan, I got my Perfect Touch picks today........trust me......you will really like them. I had them on for over an hour and they felt so natural. I can't say I play any better, but that is not the fault of the pick! :( I only adjusted them a small amount and they fit very, very, well. They stay put and do not hurt. The quality is top notch. :D
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
Bill Creller
Posts: 3740
Joined: 29 Oct 2002 1:01 am
Location: Saginaw, Michigan, USA (deceased)

Post by Bill Creller »

I had to look at my picks, to remember what they are ! :D They are .020 Dunlops ! I tried a lot of different picks over the years, but have been using these for decades !
Joe Breeden
Posts: 363
Joined: 15 Jul 2010 9:55 am
Location: Virginia, USA

Finger Picks

Post by Joe Breeden »

I have not tried PT picks. Might just do that. I recently ordered some Saddle picks. Don't like their thumb picks but the finger picks are real kind to your fingers. No pain and they stay put. Joe
User avatar
Joerg Hennig
Posts: 1046
Joined: 17 May 2001 12:01 am
Location: Bavaria, Germany

Post by Joerg Hennig »

For me, nothing but Dunlop .0225 on both pedal and non-pedal steel, they just feel right. But picks are very much a matter of personal preference, so if you're new to it, you should try several brands and sizes and find out what is most comfortable for you.
User avatar
Jude Reinhardt
Posts: 589
Joined: 28 Aug 2004 12:01 am
Location: Weaverville, NC

Post by Jude Reinhardt »

I got a pair of Saddle fingerpicks in the mail today. After adjusting they are very very comfortable. Kind of like putting on a pair of old slippers. :)

Jude
"If we live in fear of banjos, then the banjos have won".

"Man cannot live by bread alone, he must have Peanut Butter". - Kruger Bear
Ted Duross
Posts: 63
Joined: 9 Sep 2015 8:04 am
Location: Ottawa, Ontario, Canada

Post by Ted Duross »

Just a follow up on the discussion of Perfect Touch Picks from a little while back. After having listened to a few people express their appreciation for them I decided to order a pair. I’ve had them about a week and I thought I’d share my impressions.

About me. I’m new to lap steel, about 3 years in, but a long time guitar player. I try to get in an hour or so practice each day and I’m starting to get a feel for a few things.

I’d tried a couple of different pick brands and for comfort reasons had settled on brass ProPiks. I’ve been pleased with how they feel and sound. My interest in trying the Perfect Touch picks was based on a comment someone made about having seen a noticeable improvement in tone.

The Perfect Touch picks have an interesting design. The part that wraps around your finger has a substantially different configuration for the forefinger and the middle finger. They were attempting to eliminate the clicking sound picks make when the wrapped portions touch. They have been very successful with this.

I ordered medium brass picks. I used needle nosed pliers wrapped with electrical tape to do the shaping. They recommend this in their instructions. It works well and doesn’t scratch up the picks.

I liked the way my ProPiks contacted the strings so I used their profile as a target as I shaped that part of the pick. I then spent a long time adjusting the parts that wrapped around my fingers looking for a good combination of comfort and snugness. I had my lap steel close at hand and frequently tested the tone I was getting to make sure I was pleased with the sound. I also looked to see that there was a balance between the volume I was getting between the two fingers.

Bottom line is that I’m very pleased. I’m getting a richer tone and, interestingly, improved volume. Everyone’s looking for small adjustments in gear that’ll step up their game in terms of tone and technique. I think these picks, at least for me, fit the bill.

Customer service is also excellent. After they’d received my order, from Ottawa Canada, they got in touch with me. They were concerned I would be dinged for customs charges at the border. They offered to cancel my order and suggested an online outfit in Canada where I could purchase their picks. That was pretty classy... I kept my order with them and lucked out at the border with no addition costs. :)
Last edited by Ted Duross on 13 Sep 2017 2:30 am, edited 1 time in total.
Andy Henriksen
Posts: 468
Joined: 27 Apr 2012 8:59 am
Location: Michigan, USA

Post by Andy Henriksen »

here's my report. I like the PT picks a lot. They are indeed more comfortable. I wore them at rehearsal for a couple weeks in a row, but when it came to gig time this past weekend, I went back to the old picks.

I think what's holding me back from a full switch is the thickness of the metal. At .018 (I think, right?), AND given that they attach to the finger at a much lower point, I feel like I have less control over them. They bounce off the strings a bit, rather than flick through them (these things are hard to describe!)

Basically, I just felt like there was less control with the PT picks. That might be as much a function of my playing technique (or lack thereof!), admittedly.

I'll keep using them, and I suspect I'll come around fully, but it hasn't quite happened yet.

A pair of PTs in .0225 would be nice to try.
User avatar
Terry VunCannon
Posts: 1238
Joined: 20 Nov 2003 1:01 am
Location: Greensboro, North Carolina, USA
Contact:

Post by Terry VunCannon »

The PT finger picks are .020...but, keep an eye out. New things pop up on the PT site now and then.
User avatar
Jenny Thornhill Faulk
Posts: 23
Joined: 22 Aug 2006 12:01 am
Location: Tennessee, USA
Contact:

Post by Jenny Thornhill Faulk »

Don't go spoiling my surprises, Terry!!! :D
Jenny Thornhill Faulk
Perfect Touch Finger Picks
User avatar
Jenny Thornhill Faulk
Posts: 23
Joined: 22 Aug 2006 12:01 am
Location: Tennessee, USA
Contact:

Post by Jenny Thornhill Faulk »

Thanks for the kind words, Ted!! :)
Jenny Thornhill Faulk
Perfect Touch Finger Picks
User avatar
Stefan Robertson
Posts: 1846
Joined: 24 Nov 2013 9:34 am
Location: Hertfordshire, UK
Contact:

Post by Stefan Robertson »

OK so I just am not digging these PT fingerpicks.

I feel less connected not having the fingertip connection.

I will admit it obviously is way more secure but I just don't dig the feel.
Stefan
Bill Hatcher custom 12 string Lap Steel Guitar
E13#9/F secrets: https://thelapsteelguitarist.wordpress.com

"Give it up for The Lap Steel Guitarist"
User avatar
Jenny Thornhill Faulk
Posts: 23
Joined: 22 Aug 2006 12:01 am
Location: Tennessee, USA
Contact:

Post by Jenny Thornhill Faulk »

Hey Stefan,
Sorry I am just now seeing this post! I am sorry you are not satisfied with your Perfect Touch Picks!

Would love to chat with you to learn more or see if we can get you comfortable with them! Please PM me or connect through the website: www.perfecttouchpicks.com

Looking forward to chatting!
Jenny Thornhill Faulk
Perfect Touch Finger Picks
User avatar
Dennis Saydak
Posts: 671
Joined: 15 Feb 2008 5:05 pm
Location: Manitoba, Canada

Post by Dennis Saydak »

To Bill Groner; I have a set of PT brass fingerpicks that I could not get used to. They are as new in the box. I tried to give them away a while back to anyone who made a small a donation to this forum. IF you are interested let me know and I'll send them to you. They are beautifully made but I just prefer my Nationals and Kysers.
Dennis
Just when you think you're getting ahead in the rat race, the rats get faster.
User avatar
Bill Groner
Posts: 1234
Joined: 30 Dec 2016 8:42 am
Location: QUAKERTOWN, PA

Post by Bill Groner »

Dennis Saydak wrote:To Bill Groner; I have a set of PT brass fingerpicks that I could not get used to. They are as new in the box. I tried to give them away a while back to anyone who made a small a donation to this forum. IF you are interested let me know and I'll send them to you. They are beautifully made but I just prefer my Nationals and Kysers.
Thanks for your offer, but I have already purchased a set around the time of my original post. I use them off and on, but I have been experimenting with some others. PP are very nicely made.
Currently own, 6 Groner-tone lap steels, one 1953 Alamo Lap steel, Roland Cube, Fender Champion 40
Post Reply