| Author |
Topic: Settings for the Cube 80 |
W. J. Copeland
From:
Palestine, Texas, USA
|
Posted 31 Jul 2017 4:43 am |
|
| I may be double posting this. But, I have a new Cube 80 GX that I can take back if it does not work good on Pedal Steel, especially E 9th. If you are using one, I would appreciate any advice as far as which settings you have found to be adequate. Thanks in advance. |
|
|
|
David Peirce
From:
Left Coast of Florida
|
Posted 31 Jul 2017 5:44 pm
|
|
| W.J. - Try this: Blackface amp, Bass @ 3 o'clock, Mid @ 8 o'clock, Treble @ 9 o'clock, Presence just barely on, Warm Delay @ 8:30, Plate Reverb @ 2:00. YMMV, but it works pretty well for me. Oh - Master volume up all the way, gain just barely on, volume to taste. |
|
|
|
W. J. Copeland
From:
Palestine, Texas, USA
|
Posted 31 Jul 2017 8:03 pm Thanks David
|
|
| We will see what this puppy sounds like. I appreciate you taking the time. |
|
|
|
Jim Cohen
From:
Philadelphia, PA
|
Posted 31 Jul 2017 8:20 pm
|
|
I have an 80XL. I don't know how similar or different it is from the GX, but FWIW, here are my current settings.
JC Clean:
Bass: 4 o'clock
Middle: 2 o'clock
Treble & Presence: both noon (straight up)
Delay: 11 o'clock (and tap the speed button twice as fast as I can)
Reverb: 3 o'clock
I should mention that I use a 15" extension speaker with it, which I greatly prefer for PSG.
YMMV.
_________________
www.JimCohen.com
www.RonstadtRevue.com
www.BeatsWalkin.com |
|
|
|
W. J. Copeland
From:
Palestine, Texas, USA
|
Posted 1 Aug 2017 4:17 am
|
|
| Jim, thanks for your input. Just curious, are you using a powered or non-powered ext. 15" speaker? I have had 3 folks give me their settings for steel, and they are all very close. This sure helps cut down on the learning curve. |
|
|
|
Jim Cohen
From:
Philadelphia, PA
|
|
|
|
