Eminence Paul Franklin PF-350 Speaker

Steel guitar amplifiers, effects, etc.

Moderator: Shoshanah Marohn

Post Reply
User avatar
Roy Carroll
Posts: 585
Joined: 3 Jan 2011 8:08 pm
Location: North of a Round Rock

Eminence Paul Franklin PF-350 Speaker

Post by Roy Carroll »

OK guys, for those of you that have been wondering about this speaker. I replaced my stock speaker in my NV-112 with one of the PF-350 Signature speakers. Here is the results to my ears. It IS more even across the entire spectrum of strings, the higher strings are warmers and the bass strings are cleaner and more pronounced just like Mr. Franklin has said in the promo. I did not change any settings on the amp and went straight to the job. I probably had 10 compliments as to the tone being cleaner and warmer as a whole. My only complaint would be that is heavier by a few pounds. I am using a Mullen Pre RP, SD-10 with a BL-705 pickup and Hilton volume pedal. I believe it is an improvement and would not hesitate to recommend it. As always, mileage may vary. I just thought inquiring minds might want to know.
RC
Just north of the Weird place, south of Georgetown
Tim Heidner
Posts: 776
Joined: 9 Jan 2010 7:07 pm
Location: Groves, TX

Post by Tim Heidner »

Thanks for posting!
Don Olson
Posts: 192
Joined: 6 Aug 2000 12:01 am
Location: Muscatine,Ia. USA
Contact:

Post by Don Olson »

I installed the double T in my NV 112 I like it more every time I play, it is the best investment I have ever made, on the output scope the double T and PF 350 are almost identical, if you have a NV 112 spend $209 for either of the speakers and you WILL be HAPPY.
Ron Hogan
Posts: 2229
Joined: 4 Aug 1998 11:00 pm
Location: Nashville, TN, usa

Post by Ron Hogan »

Roy,
I thought the NV 112 was 4 ohm?
Isn't the PF 350 8ohm?

Ron
Don Olson
Posts: 192
Joined: 6 Aug 2000 12:01 am
Location: Muscatine,Ia. USA
Contact:

Post by Don Olson »

My NV112 is about 6 or 8 years old, I don't know what ohm's it is but I can tell you this I had to turn my power down on the amp.
Steve Spitz
Posts: 2136
Joined: 11 Jul 2001 12:01 am
Location: New Orleans, LA, USA

Post by Steve Spitz »

Yes , the NV 112 is a 4 ohm, but I put an 8 ohm JBL E120 in mine, and it sounded fantastic. Every bit as loud, and clean. I know, it was a mismatch, but it worked just fine and sounded outstanding. Heavy, but worth it. Same experience with an single 15" 8 ohm in a twin. No problem. Great sound.

Some of you with more electrical knowledge might chime in and suggest its not a good idea, and Id like to hear from you. I wont be offended if you suggest otherwise, and dont want to influence anyone with bad advice.
Tommy Shown
Posts: 2603
Joined: 9 Oct 2008 4:10 pm
Location: Denham Springs, La.

Post by Tommy Shown »

I was really impressed with tone on the amp and guitar.
User avatar
Jim Morris
Posts: 492
Joined: 18 Jul 2017 7:32 am
Location: Cincinnati Ohio, USA

Post by Jim Morris »

I have the Eminence PS-12C in my Nashville 112, do you think I would get a big difference in the tone if I go to the Paul Franklin speaker? I've been thinking on it.
1981 Emmons P/P, P2P Bad Dawg 1x12, Benado Steel Dream, Goodrich L120 volume pedal & BJS bar
User avatar
Travis Toy
Posts: 571
Joined: 29 Apr 2005 12:01 am
Location: Nashville, TN, USA
Contact:

Post by Travis Toy »

Jim Morris wrote:I have the Eminence PS-12C in my Nashville 112, do you think I would get a big difference in the tone if I go to the Paul Franklin speaker? I've been thinking on it.
Jim, you will get a massive tone difference with my speaker, or Paul's speaker. They are VERY similar in response. His is a traditional magnet and mine is a NEO. Mine will be significantly lighter.

-t
User avatar
Jim Morris
Posts: 492
Joined: 18 Jul 2017 7:32 am
Location: Cincinnati Ohio, USA

Post by Jim Morris »

Thanks travis. I'm just starting so I guess no matter what I'm playing through, my technique needs work but still, I'm looking forward...learning some things so I want the best tone u can get. The eminence I have now just doesn't have that brightness I kike. EQ is set same as tommy white settings on the Nashville 112
1981 Emmons P/P, P2P Bad Dawg 1x12, Benado Steel Dream, Goodrich L120 volume pedal & BJS bar
User avatar
Travis Toy
Posts: 571
Joined: 29 Apr 2005 12:01 am
Location: Nashville, TN, USA
Contact:

Post by Travis Toy »

Jim Morris wrote:Thanks travis. I'm just starting so I guess no matter what I'm playing through, my technique needs work but still, I'm looking forward...learning some things so I want the best tone u can get. The eminence I have now just doesn't have that brightness I kike. EQ is set same as tommy white settings on the Nashville 112
Jim, I would humbly suggest that you set your amp to what sounds good to you. Don't worry about how Tommy White, or me, or anyone else sets their amp. Unless you have Tommy's hands, his guitar, his strings, his picks, his cables, his volume pedal, etc...it's not gonna sound the same. You can sound great with your own settings. :-)

-t
User avatar
Jim Morris
Posts: 492
Joined: 18 Jul 2017 7:32 am
Location: Cincinnati Ohio, USA

Post by Jim Morris »

Yeah true, this is gow it was set when u got it. I guess I'm more xoncentrating on learning to play. I was just letting yall know gow my EQ is set...and I realize different guitars will sound different with yhe same swttings. But if you do know where I can get Tommy's hands, or a swt like yhem, let me know....but I'll need his knowledge to go with it!
1981 Emmons P/P, P2P Bad Dawg 1x12, Benado Steel Dream, Goodrich L120 volume pedal & BJS bar
User avatar
Jim Morris
Posts: 492
Joined: 18 Jul 2017 7:32 am
Location: Cincinnati Ohio, USA

Post by Jim Morris »

The advice I was given by my private teacher is listen to as many players as you can, then play like you. Guess that extends to how you set your equipment too!
Last edited by Jim Morris on 16 Aug 2017 9:37 am, edited 1 time in total.
1981 Emmons P/P, P2P Bad Dawg 1x12, Benado Steel Dream, Goodrich L120 volume pedal & BJS bar
User avatar
Travis Toy
Posts: 571
Joined: 29 Apr 2005 12:01 am
Location: Nashville, TN, USA
Contact:

Post by Travis Toy »

Jim Morris wrote:Yhe advice I was given by my private teacher is listen to as many players as you can, then play like you. Guess that extends to gow you set your equipment too!
👍🏻

-t
User avatar
Jim Morris
Posts: 492
Joined: 18 Jul 2017 7:32 am
Location: Cincinnati Ohio, USA

Post by Jim Morris »

Double T. Just watched your promo and I gotta say, I love the bite your speaker offers....choices choices!!!! BTW, not that you need approval, but I love your style of playing!!
1981 Emmons P/P, P2P Bad Dawg 1x12, Benado Steel Dream, Goodrich L120 volume pedal & BJS bar
Jerry Meek
Posts: 375
Joined: 7 Sep 2005 12:01 am
Location: Colorado, USA

PF350 speaker

Post by Jerry Meek »

Does anyone know if the pf 350 speaker come in 4ohm instead of 8 ohm. Jerry
User avatar
Jim Morris
Posts: 492
Joined: 18 Jul 2017 7:32 am
Location: Cincinnati Ohio, USA

Post by Jim Morris »

I dont.think so, but not.positive
1981 Emmons P/P, P2P Bad Dawg 1x12, Benado Steel Dream, Goodrich L120 volume pedal & BJS bar
Post Reply